Q3- A raft foundation (12 * 8) m carrying a net pressure of 183 kN/m² is located at a depth of 3.8 m below the surface in deposit of dense sandy gravel 6 m deep. The water table is located at a depth of 4.3 m. Below the sandy gravel is a layer of clay 3.8 m thick which in turn is underlain by dense sand. The value of mv for the clay is 0.28 m²/MN. Determine the settlement below the center and below the corner of the raft due to consolidation of the clay.

Q3- A raft foundation (12 * 8) m carrying a net pressure of 183 kN/m² is located at a depth of 3.8 m below the surface in deposit of dense sandy gravel 6 m deep. The water table is located at a depth of 4.3 m. Below the sandy gravel is a layer of clay 3.8 m thick which in turn is underlain by dense sand. The value of mv for the clay is 0.28 m²/MN. Determine the settlement below the center and below the corner of the raft due to consolidation of the clay.

Principles of Foundation Engineering (MindTap Course List)

8th Edition

ISBN:9781305081550

Author:Braja M. Das

Publisher:Braja M. Das

Chapter15: Braced Cuts

Section: Chapter Questions

Problem 15.6P

See similar textbooks

Similar questions

1.A raft foundation 60 X 40 m carrying a net pressure of 145 kN/m^2 is located at adepth of 4.5 m below the surface in a deposit of dense sandy gravel 22 m deep: thewater table is at a depth of 7 m. Below the sandy gravel is a layer of clay 5 m thickwhich, in turn, is underlain by dense sand. The value of mv for the clay is 0.22 m^2/MN. Determine the settlement below the centre of the raft, the corner of the raftand the centre of each edge of the raft, due to consolidation of the clay.
A circular ring foundation for an overhead tank transmits a contact pressure of 300 kN/m2 .Its internal diameter is 6 m and external diameter 10m. Compute the vertical stress on thecenter line of the footing due to the imposed load at a depth of 6.5 m below the groundlevel. The footing is founded at a depth of 2.5 m. In above, if the foundation for the tank is a raft of diameter 10 m, determine the vertical stress at 6.5 m depth on the center line of the footing. All the other data remain the same.
A load of 425 kN/m is carried on a strip footing 2m wide at a depth of1m in a stiff clay of saturated unit weight 21kN/m3 , the water table being at ground level. Determine the factor of safety with respect to shear failure: (a) when c u = 105 kN/m2 and Φu= 0 (b) when c=10 kN/m2 and Φ= 28 degree
A water tank is required to be constructed with a circular foundation having a diameter of 20m founded at a depth of 5m below the ground surface. The estimated distributed load on the foundation is 400 kN/m2. Assuming that the subsoil extends to a great depth and is isotropic and homogeneous, determine the stresses at points (i) z = 10 m, r = 0, (ii) z = 10 m, r = 10 m, (iii) z = 20 m, r = 0 and (iv) z = 20m, r = 10m, where r is the radial distance from the central axis. Use the Influence Diagram below to calculate the I. Neglect the effect of the depth of the foundation on the stresses.
A bldg. has an L-shape as shown in the plan. The load exerted by the structure is 68 kPa. Compute the total vertical stress in kPa due to the structure load at a depth of 4.5 m. below the interior corner A of the L. shaped bldg. Assume that the foundation is under the entire bldg. Unit weight of soil is 17.50 kN/m.
A circular ring foundation for an overhead tank transmits a contact pressure of 300 kN/m2. Its internal diameter is 6 m and external diameter 10m. Compute the vertical stress on the center line of the footing due to the imposed load at a depth of 6.5 m below the ground level. The footing is founded at a depth of 2.5 m.
A column foundation 1.2 ×1.6 m placed at a depth of 1.2 m. The column of 0.4 × 0.4 m is subjected to a moment in direction of least dimension of the base of 165 kN- m and to vertical load of 950 kN. The soil has a unit weight of 16.8 kN/m3, saturated unit weight of 18.8 kN/m3, cohesion of 10 kN/m2 and a friction angle of 26o. the water table located at a depth of 2.0 m. Check the stability of the foundation against B.C failure. Show all the necessary labeled sketches.
A 10-m-thick layer of stiff saturated clay is underlain by a layer of sand (Figure 9.28). The sand is under artesian pressure. A 5.75-m-deep cut is made in the clay. Determine the factor of safety against heaving at point A.
Find the settlement due to consolidation of a 9ft × 9ft coloumn foundation (figure) with a load of 1500 Ibs. The foundation is placed at 3 ft below the top surface and the clay layer is 25 ft thick. There is a sand layer underneath of the clay layer. The density of the clay layer is 115 Ibs/cf the compression index of the clay layer is 0.32 and the initial void ratio of the clay is 0.085. Assume that the pressure is distributed at a 2:1 ratio and clay is normally consolidated.
A rectangular footing 6 x 3 m carries a uniform pressure of 300 kN/m2 on the surface of a soil mass. Determine the vertical stress at a depth of 4.5 m below the surface on the center line 1.0 m inside the long edge of the foundation.
A circular foundation 12 ft in diameter imposes a pressure of 8,000 psf onto the soil. At the 12-ft depth, determine the vertical stress increase beneath the center and the edge of the loaded area, assuming:(a) the Westergaard conditions apply.(b) the 60° approximation.
A steel storage tank 20 m in diameter will be used to hold a liquid petroleum product. When filled, the tank causes a bearing pressure of 150 kPa. The soil underlying the tank has a unit weight of 18.5 kN/m3. For a depth 10 m below the base of the tank, compute the effective vertical stress when the tank is empty and when full, for points beneath the center and beneath the edge.(a) Assume the Boussinesq conditions apply.(b) Assume the Westergaard conditions apply.