Q6/ A car moving on a rough inclined plane are having the following data: Angle of inclination of the plane = 10°; wheel base of the car = 1.8 m; height of C.G. of the car above the inclined plane = 0.9 m; perpendicular distance of C.G. from rear axle = 0.8 m; speed of the car = 36 km/h; µ = 0.6. If the brakes are applied to all the four wheels, determine the distance traveled by the car before coming to rest.

Q6/ A car moving on a rough inclined plane are having the following data: Angle of inclination of the plane = 10°; wheel base of the car = 1.8 m; height of C.G. of the car above the inclined plane = 0.9 m; perpendicular distance of C.G. from rear axle = 0.8 m; speed of the car = 36 km/h; µ = 0.6. If the brakes are applied to all the four wheels, determine the distance traveled by the car before coming to rest.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.11P: Solve Prob. 7.10 assuming that the pick-up truck has front-wheel drive.

See similar textbooks

Similar questions

A highway curve with a radius of 120 m is banked so thatthere is no lateral pressure on the wheels of a car at aspeed of 48 kph. A car weighing 17.8 kN with 1.5-mdistance between its wheels and height h = 0.70 m travelsaround the curve at 96 kph. (a) What is the normal forceon the car’s outer wheels? (b) If friction is great enough toprevent skidding, at what speed would overturningimpend?
The G weight of the figure, when descending, rotates the axis fixed to drums, which are supported by two cylindrical bearings of known dimensions, with known angular velocity ω. Determine the value of weight G, neglecting the rigidity and friction in the rope and assuming that the velocity diagram in the lubricant is linear. Given Data: μ = 8x10⁻² N/m², Di = 0.100 m,D = 0.02 m, Li = 0.1 m,De = 0.101 m, ω = 20/π rd/s
A 1800-kg truck travels at 85kph around a banked curve with a radius of 250 m. What should be the super-elevation so that the tire friction is equal in magnitude to superel-evation? A. 0.114 B. 0.295 C. 0.227 D. 0.382 E. None of the above
1. A wheel tractor has a 200 HP engine. Calculate the available rimpull of this tractorif it is operating at an altitude of 1,000 m. above sea level, at an averagetemperature of 25oC, and at an average speed of 12 km/hr. Take rimpull efficiencyas 85%.2. The weight of the wheel tractor in Problem 1 is 30 tons and the weight on the drivingwheels is 50% of this weight. What is the maximum available rimpull if thecoefficient of traction is 0.25?3. What is the maximum grade that the tractor in Problems 1 and 2 can climb if it ismoving on a surface with a rolling resistance of 150 kg/ton?4. Assume that the tractor in Problems 1, 2, and 3 is moving down a 8% grade. Howmany minutes are necessary to accelerate to the average speed of 5 km/hr in firstgear? Use a rimpull reduction factor of 75% in your calculations.
find the angle of braking for a circular track of radius 600m as to be suitable for driving a car with a maximum speed of 180 km/hr (g=9.8m/s
A wheel tractor has a 200 HP engine. Calculate the available rimpull of this tractorif it is operating at an altitude of 1,000 m. above sea level, at an averagetemperature of 25oC, and at an average speed of 12 km/hr. Take rimpull efficiencyas 85%.
The arms of a Hartnell governor are of equal length. At the mid-position of the sleeve, theball arm is vertical and the radius at which the ball rotates is 10 cm when the equilibriumspeed is 400 RPM. On changing the speed by 1% the governor can overcome the frictionat this position. The friction force is assumed to have a constant value of 20 N at thesleeve. The sleeve moves ± 1.5 cm from the mean position. The minimum speed of thegovernor including friction is 450 rpm. The mass of the sleeve is 3.5 kg. Calculate themagnitude of rotating masses and initial compression of
A wheel tractor has a 200HP engine.If the weight of the wheel tractor is 30 tons and the weight on the drivingwheels is 50% of this weight, and it is operating at an altitute of 1000m above sea level, at an average temperature of 25 degree celcius, and at an average speed of 12km/hr. What is the maximum available rimpull if thecoefficient of traction is 0.25?. Take rimpull efficiency as 85%
A race car at Daytona 500 travels at a constant speed of 13.4 m/s on an inclined, circular tum of radius 50.0m, as shown in the figure below. What minimum coefficient of static friction between the tires and the roadway will allow the car to make the circular turn without sliding?
A Car is travelling on a horizontal unbanked circular track of radius r. Coefficient of friction between the tires and the track is 0.30. Determine the cars velocity while travelling at a radius of 34 m, without skidding
..A crane is to raise a load of 25,000 N at an acceleration of 1 m/s2 through a 6 x 19 wire rope whose weight is 15,000 N. The diameter of the rope is 32 mm and the rope drum diameter is 960 mm. Take the Young’s modulus for the wire rope as 80 kN/mm2. Assume dw = 0.063 d. Which of the following is the bending load of the wire rope? Group of answer choices 61 kN 40 kN 4 kN 80 kN
Determine the acceleration of body B in Fig. P-1056, assuming the pulleys to be weightless and frictionless. Ans. aB = 5.85 ft per sec2