re of equal length. At the mid-position of the sleeve, the ball arm is vertical and the radius at which the ball rotates is 10 cm when the equilibrium speed is 400 RPM. On changing the speed by 1% the governor can overcome the friction at this position. The friction force is assumed to have a constant value of 20 N at the sleeve. The sleeve moves ± 1.5 cm from the mean position. The minimum speed of the governor including friction is 450 rpm. The mass of the sleeve is 3.5 kg. Calculate the magnitude of rotating masses and initial compressio

re of equal length. At the mid-position of the sleeve, the ball arm is vertical and the radius at which the ball rotates is 10 cm when the equilibrium speed is 400 RPM. On changing the speed by 1% the governor can overcome the friction at this position. The friction force is assumed to have a constant value of 20 N at the sleeve. The sleeve moves ± 1.5 cm from the mean position. The minimum speed of the governor including friction is 450 rpm. The mass of the sleeve is 3.5 kg. Calculate the magnitude of rotating masses and initial compressio

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter7: Dry Friction

Section: Chapter Questions

Problem 7.57P: The square-threaded screw with a pitch of 10 mm and a mean radius of 18 mm drives a gear that has a...

See similar textbooks

Similar questions

Calculate the horizontal force P required to push the 85-lb lawn mower at constant speed. The center of gravity of the mower is at G, and the coefficients of rolling resistance are 0.12 for the front wheels and 0.18 for the rear wheels.
A centrifugal clutch has four shoes, each of mass 0·35 kg. When at rest, the radialclearance between the shoes and the clutch drum is 15 mm and the radius to the centre ofgravity of the shoes is 225 mm. The shoes are held on retaining springs of stiffness 10kN/m and the internal diameter of the clutch drum is 600 mm. The coefficient of frictionbetween the drum and the shoes is 0·3.Determine:(a) The speed (in rev/min) at which the clutch starts to engage. For a rotational speed of 1200 rev/min:(b) The force each shoe exerts on the drum. (c) The torque transmitted. (d) The power transmitted.
The arms of aHartnell governor are of equal length. At the mid-position of the sleeve, the ball arm isvertical and the radius at which the ball rotates is 10 cm when the equilibrium speed is 400RPM. On changing the speed by 1% the governor can overcome the friction at this position.The friction force is assumed to have a constant value of 20 N at the sleeve. The sleeve moves± 1.5 cm from the mean position. The minimum speed of the governor including friction is450 rpm. The mass of the sleeve is 3.5 kg. Calculate the magnitude of rotating masses andinitial compression of the spring.
In a Porter governor, the mass of the central load is 18 kg and the mass of each ball is 2 kg. The top arms are 250 mm while the bottom arms are each 300 mm long. The friction of the sleeve is 14 N. If the top arms make 45° with the axis of rotation in the equilibrium position, find the range of speed of the governor in that position. 503.2
Q12 / A Porter governor has links 150 mm long and are attached to pivots at a radial distance of 30 mm from the vertical axis of the governor. The mass of each ball is 1.75 kg and the mass of the sleeve is 25 kg. The governor sleeve ready to rise at 300 rpm when the links are at 30 ° to the vertical. Assuming the friction force to be constant, find the value of the friction force, minimum and maximum speed of rotation when the inclination of the links is 45 ° to the vertical.
consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless what is the acceleration of mass m2 on the inclined plane? take positive acceleration to be up the ramp a2 = ?
consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless when mass m2 moves a distance 4.94 m up the ramp, how far downward does mass m1 move? d= ?
A pile-driver hammer has a mass of 300 kg and is to be raised 16 m in 4 sec. The total friction on the guides is constant at 400 N. What constant pull must be exerted on the cable?
Two blocks having the weights and positions shown in Fig. P-1243 rest upona frame which rotates about its vertical axis at a constant speed. Thecoefficient of friction between the blocks and the frame is 0.20. The weightand friction of the pulley being neglected, at what speed in rpm will theblocks start to slide2 What is the tension in the cord at this instant?
The G weight of the figure, when descending, rotates the axis fixed to drums, which are supported by two cylindrical bearings of known dimensions, with known angular velocity ω. Determine the value of weight G, neglecting the rigidity and friction in the rope and assuming that the velocity diagram in the lubricant is linear. Given Data: μ = 8x10⁻² N/m², Di = 0.100 m,D = 0.02 m, Li = 0.1 m,De = 0.101 m, ω = 20/π rd/s
A block weighing 2.50 kg begins its motion from a stationary position at point A, located at the highest point of a frictionless ramp. The ramp is inclined at an angle of 40° relative to the horizontal and has a length of 1.50 m. As the block slides down the ramp, it reaches a region between point B and point C, which is a rough horizontal surface with a kinetic friction coefficient of 0.30. After covering a distance of 1.00 m on the horizontal surface, the block encounters a lightweight spring with a spring constant of 900 N/m. A. Find the total energy for point A and point B? B. Find the speed of the block at point B? C. What is the cumulative work performed on the block as it moves along the rough horizontal surface? D. By employing the work-energy theorem, determine the velocity of the block at point C just before it collides with the spring?
consider the mass and pulley system in the attached file. mass m1 = 29 kg and mass m2 = 12kg. the angle of the inclined plane is given and the coefficient of kinetic friction between mass m2 and the inclined plane is uk = 0.12. assume the pulleys are massless and frictionless if the system is released from rest, what is the speed of mass m2 after 2.5 s? v(2.5 s) = ?