Answered: Q6/ A material has a true stress…

Q6/ A material has a true stress -strain curve given by o=Kɛ", derive and calculate the true and engineering ultimate tensile strength of this material. (use : k=689.47kpa , n=0.5)

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.5.6P: A solid circular bar of diameter d = 50 mm (see figure) is twisted in a testing maching until the...

See similar textbooks

Related questions

Q: Problem 1 (6-1 , Eringen) Prove that in a nonlinear, isotropic, elastic solid the only possible…

A: given; prove that in a nonlinear ,isotropic , elastic solid the only possible initial stress is a…

Q: If an isotropic material has a Young's modulus of 200 Gpa and a Poisson's ratio of 0.3, calculate…

Q: -Define the maximum shear stress theory and sketch its failure envelope. -Define the maximum shear…

Q: A 12 mm thick steel tire has a width of 110 mm has an internal diameter of 800 mm. Tire is heated…

A: Answer: (a) The tensile stress in the tire is 125 MPa. (b) The compressive pressure between the tire…

Q: A material with an Ultimate Tensile Strength (UTS) of 350 Mpa is loaded cyclically about mean stress…

A: The relationship between Goodman is an equation used to measure the interplay of mean and…

Q: Find the Brinell hardness number of the material

A: To Find Brinell hardness number of the material

Q: A 100in. diameter cylinder (closed ends) made of a material having an allowable yield strength in…

A: The given data are: d=100 inτ=10000 psiP=300 psi Here, d, τ, and P represent the diameter, allowable…

Q: A gauge # 10 HSLA steel for an automotive application has a Young’s modulus of 200 GPa, a yield…

A: Find the punch force required

Q: 1. A steel of rotating-beam test specimen has an ultimate strength of 1600Mpa. Estimate the life of…

A: Given, Sut = 1600 MPa σrev= 900 MPa From Graph Sut = 1600 MPa = 232 psi => f = 0.77 Sut >…

Q: Calculate the reliability if information about both the strength data (170 ± 20 MPa) and stress data…

A: Given: The standard deviation based on strength data = 2x20 = 40 MPa The standard deviation based on…

Q: 2.) An S-five ninety alloy specimen nine hundred mm long will be subjected to eighty MPa tensile…

A: Solution; Given Data: L=900 mmσ=80 MPaT=815oCt=5000 hrs To Find: ∆L

Q: 5 (a) A steel bar is subjected to a sequence of completely reversed stress cycles which vary over a…

A: Given , Endurance Limit(Se) = 430 N/mm2 Completely reversed stress cycle, S1 = 570 N/mm2 S2 = 630…

Q: Sketch a tensile member with (a) a rectangular crosssection, (b) a solid circular cross section, and…

Q: If the ultimate strength of a steel rotating-beam test specimen was around 1600 MPa. Estimate the…

Q: 1. A steel rod is subjected to tension force (diameter: 30 mm) is made of annealed AISI 1015 steel.…

Q: Identify the material that has maximum stiffness value from the following stress- strain curves.

A: Higher the positive slope in stress-strain curve of a material implies higher the stiffness.

Q: A cube of a material with a yield strength of 100x10° N/m*is subjectedtotheloads shown onthe right.…

Q: Consider a wide, flat panel in an aircraft application which experiences fatigue stresses. The…

Q: Find the strain proportions (ɛ1:E2:E3) that existed in a forming process where O3= 0. Also specify…

A: Given data, Stresses are σ1 σ2=σ13 and, σ3=0

Q: 02: A steel specimen 12mm diameter has gauge length 50mm. the steel specimen had tested via tensile…

A: We are suppose to solve only 3 subparts. Please post other subparts as a separate question.

Q: Q3\ A) A 10-mm-diameter bar of 1040 carbon steel is subjected to a tensile load of 50,000 N, taking…

Q: A steel rotating-beam test specimen has an ultimate strength of 1600 MPa. Estimate the life of the…

A: Given data: Ultimate strength Sut = 1600 MPa Stress amplitude σa = 900 MPa First we calculate the…

Q: A steel specimen 12mm diameter has gauge length 50mm. the steel specimen had tested via tensile…

A: You have posted multiple questions on single window. As per the guidelines I am able to answer first…

Q: A drill rod with a diameter of 12 mm is made of high-strength steel alloy with a shear modulus of 80…

Q: 12. We didn't measure the shear strain directly for our torsion tests. What measurement did we make…

A: Torsion testing is a mechanical testing method that is used to identify the properties of materials…

Q: hardest point in the embedment A or B of the element shown in the figure. This bar is made of hot…

Q: See the set of bars for made of a material that has a yield strength of 350 MPa, determine the…

Q: Hexagonal nuts for 6.25mm diameter bolts have a height of 5.5mm. If the ultimate strength of the nut…

A: Write the given values along with suitable variables.

Q: Part (1): A 30 ?? square plate is subjected to uniform pressure as shown in Figure.1. The 2D loading…

A: Givensquare plate a=30mmE=200GPa=200×103 MPaμ=0.3σx=80MPaσy=40MPa

Q: The principal stresses at a point inside a solid object are ơ1 = 100 MPa, 02= 100 MPa and 03= 0 MPa.…

Q: Find the equivalent stresses at Points 1 and 2 of the element with given geometry and loading…

A: Given, Shaft diameter, d=20 mm=0.020 m Shaft length, L=120 mm=0.12 m F1=750 N F2=3000 N Torsion,…

Q: The is a graphical representation of fatigue strength on the Y-axis and the number of stress cycles…

Q: mm thickness is compressed between two flat dies, and μ = 0.1 determine sticking radius and load on…

Q: A tensile stress is to be applied along the axis of a cylindrical brass rod with diameter of 200 mm.…

A: since you haven't mentioned the value of poison ration and elastic modulus that's why the reference…

Q: 5. A specimen of Al have a cross section 10×12.7 mm?, pulled with 35,500N, producing elastic…

Q: Problem 2: (M6) A brittle material has the properties Sut=30 kpsi and Suc=90 kpsi. Using the brittle…

A: Given dataUltimate tensile stress Sut = 30kipsUltimate compressive stress Suc= 90kipsStress in x…

Q: Identify the material that has maximum stiffness value from the following stress-strain curves.

A: Material A has higher stifness.

Q: A rod specimen of ductile cast iron was tested in a torsion-testing machine. The rod diameter was 14…

Q: Callister Problem 6.20: A brass alloy is known to have a yield strength of 275 MPa, a tensile…

Q: In a sheet metal of 2 mm thickness, a hole of 10 mm diame- ter needs to be punched. The yield…

Q: Sketch two more stress-strain diagrams, again one for a ductile material and one for a brittle…

A: Stress and strain: Stress is defined as the internal resisting force per unit area; it represents…

Q: steel bar is desired to be formed until it has a final length of 1.8m. What length sould the bar in…

Q: Derive the following equation for computing shear stress in a solid bar along an oblique plane with…

Q: he stainless steel specimen is shown in Figure 3 with tensile engineering stress-strain behaviour.…

Q: A material with an Ultimate Tensile Strength (UTS) of 400 Mpa is loaded cyclically about mean stress…

A: Given data as per question Ultimate Tensile Strength (UTS) of material =400 Mpa mean stress =80…

Q: A steel specimen 12mm diameter has gauge length 50mm. the steel specimen had tested via tensile…

Q: 02: A steel specimen 12mm diameter has gauge length 50mm. the steel specimen had tested via tensile…

A: we are suppose to solve only 3 subparts of a question. please post other parts and other question as…

Q: True stress-strain Engineering stress-strain strain Calculate the engineering ultimate tensile…

Q: The Mohr's circle of plane stress for a point in a body is shown. The design is to be done on the…

A: Given:Mohr's circle of plane stress

Concept explainers

Pressure Vessels

The term pressure vessel refers to a closed container that contains gas or liquid at a different pressure than environment pressure. The pressure vessels have a wide scale of applications in our day-to-day lives and other industrial places. Some common examples of pressure vessels are gas cylinders, autoclaves, compressor vessels, etc.

Question

Q6/ A material has a true stress -strain curve given by o=Kɛ", derive and calculate
the true and engineering ultimate tensile strength of this material.
(use : k=689.47kpa , n=0.5)

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

A spherical steel pressure vessel (diameter 500 mm, thickness 10 mm) is coated with brittle lacquer that cracks when the strain reaches 150 X 10~ (see figure). (a) What internal pressure p will cause the lacquer to develop cracks? (Assume E = 205 GPa and v = 0.30.) (b) If the strain is measured at 125 x 10-6, what is the internal pressure at that point?
Solve the preceding problem if the diameter is 480 mm, the pressure is 20 MPa, the yield stress in tension is 975 MPa, the yield stress in shear is 460 MPa, the factor of safety is 2,75, the modulus of elasticity is 210 GPa, Poissorfs ratio is 0.28, and the normal strain must not exceed 1190 x 10" . For part (b), assume that the tank thickness is 8 mm and the measured normal strain is 990 x 10~ .
- A specimen used in a coupon test has norm al stress ??. = 15 MPa (see figure). Using Mohr’s circle, find the state of stress on the element oriented at angle ? = 20° and show the full stress state on a sketch of a properly oriented element.
A brass plate with a modulus of elastici ty E = 16 X 106 psi and Poisson’s ratio a = 0.34 is loaded in biaxial stress by normal stresses r and cry. (sec figure). A strain gage is bonded to the plate at an angle 4 = 350 If the stress o is 10,700 psi and the strain means used by the gageise = 390 X 106.whatisthcmax- imum in-plane shear stress (Tr, ),. and shear strain (>‘ ).? What is the maximum shear strain (y ) in the x-: plane? What is the maximum shear strain (y ).. in the y-r plane?
The rails of a railroad track are welded together at their ends (to form continuous rails and thus eliminate the clacking sound of the wheels) when the temperature is 60°F. What compressive stress ?? =6.5×10-6 /? is produced in the rails when they are heated by the sun to 120"F if the coefficient of thermal expansion a = the modulus of elasticity E = 30 × 106 psi?
A wine of length L = 4 ft and diameter d = 0.125 in. is stretched by tensile forces P = 600 lb. The wire is made of a copper alloy having a stress-strain relationship that may be described mathematically by =18,0001+30000.03(=ksi) in which is nondimensional and has units of kips per square inch (ksi). (a) Construct a stress-strain diagram for the material. (bj Determine the elongation, of the wire due to the Forces P. (c) IF the forces are removed, what is the permanent set of the bar? (d) If the forces are applied again, what is the proportional limit?
A solid circular bar of diameter d = 50 mm (see figure) is twisted in a testing maching until the applied torque reaches the value T = 500 N ·. At this value of torque, a strain gage oriented at 45º to the axis of the bar gives a reading e = 339 × 10-6. What is the shear modulus G of the material?
Analyse the differences between the 2 attached stress-strain curves for 0.9% carbon steel and 0.15% carbon steel.
A steel rod (initial diameter: 3.2 mm, initial length: 42 mm) is extended by auniaxial tensile load of 4800 N in 120 seconds. At this load, the length of therod is measured as 49,2 mm. Calculate the followings:(a) Stress and strain occurred on the rod at this load.(b) Initial strain rate.(c) Diameter of the rod at this load.(Yield strength : 380 MPa, Ultimate Tensile Strength: 670 MPa,Modulus of Elasticity: 210000 MPa were given for this material)
A tensile stress is to be applied along the axis of a cylindrical brass rod with diameter of 200 mm. What is the load magnitude required to produce 2.8 x 10^-2 change in diameter if the deformation is entirely elastic?
In a sheet metal of 2 mm thickness a hole of 10 mm diameter needs to be punched. The yield strength in tension of the sheet material is 100 Mpa and its ultimate shear strength is 80 MPa. Determine the force required to punch the hole.
Calculate the reliability if information about both the strength data (170 ± 20 MPa) and stress data (16 ± 5 MPa) is given to you.