I need the answer as soon as possible WaterQ7) Air is flowing through a pipe and a mercurymanometer is attached with this pipe. If theBmanometer reads (d = 0.3 cm), determine the80 mmvelocity of air through the pipe. Take pHg =40 mm13550 kg/m3DQ8) A fountain ejects water through a nozzle, whichhave inner diameters of 0.3 mm, at B as shown. If thevolumetric flow rate into the 40-mm-diameter pipeat A and through the nozzle at B is (Q = 2 1/s) and thehead losses between A and B is (hl = 3m), determinethe height h of the water stream passing through thenozzle and the pressure at A.DBA

Answered: Image /qna-images/answer/4b525a7c-0359-40ff-9628-fc582bbdbc38.jpg

Q7) Air is flowing through a pipe and a mercury manometer is attached with this pipe. If the manometer reads (d = 0.3 cm), determine the velocity of air through the pipe. Take pHg = 13550 kg/m³ D B Water 80 mm 40 mm d

Q7) Air is flowing through a pipe and a mercury manometer is attached with this pipe. If the manometer reads (d = 0.3 cm), determine the velocity of air through the pipe. Take pHg = 13550 kg/m³ D B Water 80 mm 40 mm d

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: A bicycle and a rider of mass 90 kg are travelling at the rate of 15 km/hr on the level road. A…

A: On a level road, a bicycle and a rider weighing 90 kg go at a speed of 15 kilometres per hour.The…

Q: Calculate the diameter of the nozzle and dimensions of an atmospheric burner that works with…

Q: 3. A child stands near the edge of a playground merry-go-round, 2 meters from the center. She holds…

A: Given, Distance between child and the center of the circle (Radius of rotation) = R = 2 m Static…

Q: 20-teeth sprocket driving a 100 teeth sprocket with a center distance of 38 pitches. Find the chain…

Q: A hollow cylinder 1 m in diameter and 2 m high weighs 2825 N. How many kN of lead weighing 110…

A: The weight of the cylinder and lead is balanced by the Buoyancy force. Let us consider that the…

Q: An air-standard Diesel cycle has a compression ratio of 16 and a cutoff ratio of 2. At the beginning…

A: Givenrk=16rc=2P1=95kPaT1=270C=300K

Q: A) What are the requirements for a good boiler

A: Requirements for a good boiler:

Q: 2. A cascade refrigeration system using R - 22 in the low - temperature circuit and ammonia (R-717)…

Q: Q5/ An existing process consists of two steps: (a) One mole of air at T1=900k and p1= 3 bar is…

A: 2 step process:

Q: Water tank 3m 2m Pump 4 m/s

Q: 1. The cable is subjected to a uniform loading of w = 60 kN/m. Determine the maximum and minimum…

Q: The bore and stroke of an air compressor are 276mm and 164mm, respectively. If the piston…

Q: 3. A box (mass = 100 g) is initially connected to a compressed (x = 80 cm) spring (k = 100 N/m) at…

Q: The shaft as shown in the figure is supported by bearings at A and B. The bearings exert only…

A: Given data as per question F =41.4KN

Q: A cylinder has an internal diameter of 230 mm, has walls 5 mm thick and is 1 m long. It is found to…

A: The thin cylindrical pressure vessels are those where the radial stress can be neglected and…

Q: a. 24 kN 3 m 7 kN/m B 90 kN-m 6 m V max M max 3m D 3 m 12 kN X E

A: First calculate the reactions the. Draw the sfd and bmd

Q: 22,000 kg Mass of plane: Tension, T: 400 N Determine the reactions at A and each of the two wheels…

Q: N N M R x Determine the centroid of the shape above if N = 1.5 m, M = 3 m and R = 2 m. (2.67, 3.11)…

Q: 9.18 The high pressure stage of an axial turbine has the following data: degree of reaction = 50 per…

A: Given Degree of reaction = 50% Exit air angle = 70o Mean diameter = 1m Rotation = 3000 rpm Power = 5…

Q: A single stage compressor is to compress 8.5m3/min from 98.56KPa to 985KPa. Polytropic constant is…

Q: Q1/A power plant operating on Carnot cycle that produces (500MW). It turned out that this represents…

Q: A Proportional plus Integral (PI) controller is designed for the control of an underdamped second…

Q: A 10” x 6” x 10” duplex piston pump with 1½” diameter rod makes 60 single strokes per minute. The…

A: Answer: (a) The volumetric efficiency: 81.3 % (b) The slip of the pump: 221.6 in3/sec

Q: A Rankine turbo-generator unit receives 10 kg/s of steam at 10.0 MPa and 550°C. Condensate leaves at…

Q: enters the room through a 200 mm diameter pipe and exits the fan into the ambient air through 24…

A: Ans: 0.854 Last option is correct.

Q: Q2 / Heat is transferred from a tank of water in a refrigerator at(OC) degrees to a tank of boiling…

A: As per our guidelines, experts can provide solution to only one problem in case of multiple…

Q: 3. Draw the shear-force and bending-moment diagrams for the beam shown. Determine the maximum shear…

Q: Air-cooled condensers and cooling towers can be cooled by a propeller fan Select the correct…

A: True. The propeller fan is usedfor low pressure drop system such that , Air cooled condenser Cooling…

Q: Solve Q 1 Q1. Determine the distance x measured from the y axis to the centroid of the area of the…

Q: Topic: Applications of Definite Integrals: Work and Force Due to Fluid Pressure The face of a dam…

Q: / The assembly consists of two sections of cast-iron rod connected together using a reducing…

A: given data diameter of AB = 0.75 in length of AB= 12 in diameter of BC = 1 in length of BC = 15 in…

Q: 3. Determine the moment vector of the force F₁ about the line OB. (express your answer to two…

A: find the moment vector of the force F1 about the line OB.

Q: Considering that the change in enthalpy at the first stage of a Reheat Rankine Cycle is 1050 kJ/kg…

A: following is the solution to the above problem-

Q: The figure below shows an electromechanics system that is consist of a DC motor controlled by a…

A: Given Servomotor To find Block diagram Work principle

Q: Q1. Determine the distance x measured from the y axis to the centroid of the area of the triangle…

Q: The cotter joint, shown in the figure below, is subjected to over determine the exposed stressed…

A: we have to figure out the area under stress in each of the situation

Q: The ratio of the strain in the lateral direction to that in the axial direction A Pascal's Number…

A: Given data Strain is the ratio of change in dimension to original dimension.

Q: A solid steel shaft 4.5 m long is stressed at 75 MPa when twisted through 4.5°. What power can be…

A: Given: Twisting angle, θ = 4.5° = 4.5°π180° Stress, τmax = 75 MPa Length, L = 4.5 m = 4500 mm G =…

Q: Shaft BC is hollow with inner and outer diameters of 90 mm and 120 mm, respectively. Shafts AB and…

Q: 1. Determine the slope and deflection at point B of the beam ABC shown using the Area- Moment…

Q: 1. A cascade refrigeration * system using R-22 in the low - temperature circuit and ammonia (R-717)…

Q: Q3/ Consider Steam is cooled from 550 to 111.4 °C. Assume that during this process the pressure…

Q: The flow of a river is 35m3/s and produces a total brake power of 6MW. If it is proposed to install…

Q: A) What are the requirements for a good boiler

A: Boiler is an apparatus which is used to convert liquid into vapour by applying heat. It is majorly…

Q: Mass of the plane 150,000 kg Initial velocity 0 Final velocity 100 m/s Distance traveled 500 m The…

A: Given m=150000kgU=0V=100m/sS=500mnumber engine n=4

Q: 6. Two thousand pounds of banana per day is refrigerated to 25°F. Initial temperature of the bananas…

Q: The steady-state response is the part of the Total Response which does not approach infinity as time…

A: The amplitude of steady-state response remains unchanged and does dependent on time.

Q: C) What are the side effects of air and non-condensable gasses in the condenser

A: 1. Presence of air and non condensable gases in the condenser reduces heat transfer during…

Q: In determining the bending stress, what conclusion can be drawn if the neutral axis is an axis of…

Q: Determine the center of mass for the region bounded by the following. Answer as a decimal, in terms…

Question

I need the answer as soon as possible

Water
Q7) Air is flowing through a pipe and a mercury
manometer is attached with this pipe. If the
B
manometer reads (d = 0.3 cm), determine the
80 mm
velocity of air through the pipe. Take pHg =
40 mm
13550 kg/m3
D
Q8) A fountain ejects water through a nozzle, which
have inner diameters of 0.3 mm, at B as shown. If the
volumetric flow rate into the 40-mm-diameter pipe
at A and through the nozzle at B is (Q = 2 1/s) and the
head losses between A and B is (hl = 3m), determine
the height h of the water stream passing through the
nozzle and the pressure at A.
D
B
A

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Determine the manometer reading as shown in thefigure, when the velocity of fluid flowing through a75mm diameter pipe is 0.6 m/sec.
The diameter of a horizontal pipe which is 300 mm is suddenly enlarged to 600 mm. The rate flow of water through this pipe is 0.4 m3/s. If the intensity of pressure in the smaller pipe is 125 kn/m2, determine:1. Loss of head, due to sudden enlargement, 2. Intensity of pressure in the larger pipe. and 3. Power lost due to enlargement.
An unknown gas is flowing through a venturi meter whose diametersas shown. Gage pressures are measured 12.2 psia at the entranceand 11.8 psia at the throat. Take the density to be 0.105 lb/ft3.Determine the following: a) Neglecting friction, the volume flow rate of air b) If the pressure gauge is replaced with a manometer withmercury as its medium (SG=13.6), what will be the height ofthe mercury in inches? Draw the most possible orientationof the manometer and its fluid height.
An unknown gas is flowing through a venturi meter whose diametersas shown. Gage pressures are measured 12.2 psia at the entranceand 11.8 psia at the throat. Take the density to be 0.105 lb/ft3.Determine the following: A) Neglecting friction, the volume flow rate of airB) If the pressure gauge is replaced with a manometer withmercury as its medium (SG=13.6), what will be the height ofthe mercury in inches? Draw the most possible orientationof the manometer and its fluid height.
The figure shows a siphon that is used to draw waterfrom a large open tank. If the absolute vapor-pressureof the water is pv = 1.23 kPa. (a) determine the shortest drop length L of the50-mm-diameter tube that will cause cavitation in thetube. Show all your calculations. (b) Also draw the energy and hydraulic grade lines forthe length of the tube. Be sure to indicate the pressureheads, elevation heads, and dynamic heads. And toshow all your calculations.
What is the minimum diameter at section (1) to avoid cavitation at that point? Take D2 = 15 cm.
What is the maximum liquid water depth for a laminar flow if the flow speed is 0.01 m/s? (The density of water is still 1000 kg/m3, and it has a viscosity of 0.001 kg/(m*s).)
A pipe whose axis is horizontal, is full of water in motion. At a section A, the velocity of water is recorded as 54000dm/hrandd the pressure is equilavent tp 14.07m of water. if the pipe tapers gradually from 150mm diameter to A to 100mm diameter at B. determine the preesure at B.
The velocity distribution for water (20°C) near a wall is given by u = a(y/b ) ^1/6, where a = 10 m/s, b= 2 mm, and y is the distance from the wall in mm. Determine the shear stress in the water at y = 1 mm.
The water is supplied at a pressure of 15 N/cm? to an accumulator, having a ram of diameter 2.0 m. If the total lift of the ram is 10 m, determine: (a) the capacity of the accumulator, and (b) total weight placed on the ram (including the weight of the ram). [Ans. (a) 4712.4 kNm, (b) 471240 N]
Using a flexible drinking straw and a ruler, explain how you would measure the water flow velocity in a river.
Water flows out of a faucet at A at 6 m/s. Determine thevelocity of the water just before it strikes the ground at B