QUESTION 2 Estimate the cooling load in a building at 14 hr and 21 hr from 143 athletics people in a Gymnasium occupied from 0700 h to 1300 h and 97 walking (4.8 km/hr) people occupied from 1400 h to 1800 h. The Gymnasium temperature is 25°C, and the cooling system operates continuously. Assume the conditions of the space define as Type D.

QUESTION 2 Estimate the cooling load in a building at 14 hr and 21 hr from 143 athletics people in a Gymnasium occupied from 0700 h to 1300 h and 97 walking (4.8 km/hr) people occupied from 1400 h to 1800 h. The Gymnasium temperature is 25°C, and the cooling system operates continuously. Assume the conditions of the space define as Type D.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter7: Forced Convection Inside Tubes And Ducts

Section: Chapter Questions

Problem 7.36P

See similar textbooks

Similar questions

8.2 From its definition and from the property values in Appendix 2, Table 13, calculate the coefficient of thermal expansion, , for saturated water at 403 K. Then compare your results with the value in the table.
7.43 Liquid sodium is to be heated from 500 K to 600 K by passing it at a flow rate of 5.0 kg/s through a 5-cmID tube whose surface is maintained at 620 K. What length of tube is required?
Show how to solve the heat transfer analysis and show formulas to be used in Evaporation cooling in cooling towers. Subject : Heat Transfer
Heat Transfer Problem 1
A storeroom of dimensions 10 x 8 x 3 m is maintained at 21oC and 50% RH and has a total heating load of 10 kW. The room is provided with 8 air changes per hour when ambient conditions are 30oC and 60% RH. Determine: a. the total cooling rate b. moisture removed per hour c. the minimum diameter of the fresh air duct so that the velocity in the duct does not exceed 3 m/s
A cold room for storage is kept at atemperature of 10[°C] and a relative humidity of 80%. The air flow overthe evaporator is 30,000 [m³/h] and the air temperature measured at the outlet of theevaporator is 5[°C]. Under these conditions, the installation develops a cooling power of 100 [kW].Calculate the amount of condensate water that forms in the evaporator inone hour.
What is the heat transfer coefficient for ambient air at 43 C
1) Determine the height of chimney required in a boiler having natural draught equivalent to 25 mm of water. The flue gases are at temperature of 600K , atmospheric air temperature is 25 C and 15 kg air per kg of fuel is required in boiler.
Q2 : Room walls are composed of common bricks and outside and inside plaster layers with an overall heat transfer coefficient of 2.5 W / m² ° C . The outside air temperature is 15 ° C ( DBT ) and the inside design conditions are 23 ° C DBT , 55 % RH . Is condensation occur on the inside surface or not ? Take f = 8.26 W / m² ° C . SHI
Consider a heat engine with a piston chamber that has a diameter of 30 mm, a cold reservoir at 285 K and hot reservoir at 350 K. It is also equipped with a metal can cylinder that has a volume of 0.0002 m3. How many moles of air are present in the system if the metal cylinder is in the cold tank and the measured pressure and the total air volume are 104160 and 0.00015 m3, respectively?
The cylinders that come out of the heat treatment furnace are cooled in a stagnant air environment in a horizontal position. The cylinders have a diameter of 100 mm and a length of 0.1 m. The temperature of the cylinders is 440 ° C and the ambient temperature is 20 ° C. Calculate the heat transfer from 10 cylinders to the environment. a) 3125 W b) 2350 W C) 1848 W d) 1354 W e) 2750 W
In a steam boiler with a volume of 2 m3, there is wet water vapor at 200 kPa pressure. Since it is known that 20% of the volume of the boiler is water and 80% is steam,a) The temperature of the wet water vaporb) degree of drynessc) Specific volume