Question 2. Prayush is doing an experiment in thermodynamics with turpentine oil. He uses a 20.0 cm deep hollow cylinder made with aluminium. The cylinder has an internal capacity of 2.0 L and is completely filled with turpentine oil at 20.0° C. He then slowly heats the turpentine oil and the aluminum cylinder together to a temperature of 80.0° C. The coefficient of linear expansion of aluminium is 24 x 10-6(° C)-', volume expansion of turpentine is 9.0 x 10-4(°C)-!, and the specific heat capacity of aluminium is 900 J/kg°C respectively. (a) How much turpentine oil overflows (b) What is the volume of the turpentine remaining in the cylinder at 80.0°C? (c) How much heat must be added to the 30.0 kg aluminium cylinder in order to increase its internal capacity by 0.025 L ? _

Question 2. Prayush is doing an experiment in thermodynamics with turpentine oil. He uses a 20.0 cm deep hollow cylinder made with aluminium. The cylinder has an internal capacity of 2.0 L and is completely filled with turpentine oil at 20.0° C. He then slowly heats the turpentine oil and the aluminum cylinder together to a temperature of 80.0° C. The coefficient of linear expansion of aluminium is 24 x 10-6(° C)-', volume expansion of turpentine is 9.0 x 10-4(°C)-!, and the specific heat capacity of aluminium is 900 J/kg°C respectively. (a) How much turpentine oil overflows (b) What is the volume of the turpentine remaining in the cylinder at 80.0°C? (c) How much heat must be added to the 30.0 kg aluminium cylinder in order to increase its internal capacity by 0.025 L ? _

Principles of Physics: A Calculus-Based Text

5th Edition

ISBN:9781133104261

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter16: Temperature And The Kinetic Theory Of Gases

Section: Chapter Questions

Problem 19P

See similar textbooks

Similar questions

Two concrete spans that form a bridge of length L are placed end to end so that no room is allowed for expansion (Fig. P16.63a). If a temperature increase of T occurs, what is the height y to which the spans rise when they buckle (Fig. P16.63b)?
For a temperature increase of 10 at constant volume, what is the heat absorbed by (a) 3.0 mol of a dilute monatomic gas; (b) 0.50 mol of a dilute diatomic gas; and (c) 15 mol of a dilute polyatomic gas?
The average coefficient of linear expansion of copper is 17 106 (C)1. The Statue of Liberty is 93 in tall on a summer morning when the temperature is 25C. Assume the copper plates covering the statue are mounted edge to edge without expansion joints and do not buckle or bind on the framework supporting them as the day grows hot. What is the order of magnitude of the statues increase in height? (a) 0.1 mm (b) 1 mm (c) 1 cm (d) 10 cm (e) 1 m
One of a dilute diatomic gas occupying a volume of 10.00 L expands against a constant pressure of 2.000 atm when it is slowly heated. If the temperature of the gas rises by 10.00 K and 400.0 J of heat are added in the process, what is its final volume?
An aluminum rod 0.500 m in length and with a cross-sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 300 K. (a) If one-half of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool. (b) If the circular surface of the upper end of the rod is maintained at 300 K, what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 W/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)
One way to cool a gas is to let it expand. When a certain gas under a pressure of 5.00 106 Ha at 25.0C is allowed to expand to 3.00 times its original volume, its final pressure is 1.07 106 Pa. (a) What is the initial temperature of the gas in Kelvin? (b) What is the final temperature of the system? (See Section 10.4.)
A hollow aluminum cylinder 20.0 cm deep has an internal capacity of 2.000 L at 20.0C. It is completely filled with turpentine at 20.0C. The turpentine and the aluminum cylinder are then slowly warmed together to 80.0C. (a) How much turpentine overflows? (b) What is the volume of the turpentine remaining in the cylinder at 80.0C? (c) If the combination with this amount of turpentine is then cooled back to 20.0C, how far below the cylinders rim does the turpentines surface recede?
An ideal gas initially at 300 K undergoes an isobaric expansion at 2.50 kPa. If the volume increases from 1.00 m3 to 3.00 m3 and 12.5 kJ is transferred to the gas by heat, what are (a) the change in its internal energy and (b) its final temperature?
The outer diameter of a glass jar and the inner diameter of its iron lid are both 760 mm at room temperature (20.0 ∘C). a)What will be the size of the mismatch between the lid and the jar if the lid is briefly held under hot water until its temperature rises to 57.5 ∘C, without changing the temperature of the glass? Use the coefficient of linear expansion for iron α=1.2×10−5K−1.
A 2-m long aluminum rod at 27°C is heated until it is 2.000236m at 77°C. what is the coefficient of linear expansion of aluminum?