Question 5 The results of the particle-size analysis of a soil are as follows: • Percent passing the No. 10 sieve = 100 • Percent passing the No. 40 sieve = 80 • Percent passing the No. 200 sieve = 38 The liquid limit and plasticity index of the minus No. 40 fraction of the soil are 40 and 15, respectively. Compute the group index. A 1.75 1.0 2.5 2.0

Question 5 The results of the particle-size analysis of a soil are as follows: • Percent passing the No. 10 sieve = 100 • Percent passing the No. 40 sieve = 80 • Percent passing the No. 200 sieve = 38 The liquid limit and plasticity index of the minus No. 40 fraction of the soil are 40 and 15, respectively. Compute the group index. A 1.75 1.0 2.5 2.0

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter5: Classification Of Soil

Section: Chapter Questions

Problem 5.10P

See similar textbooks

Similar questions

Refer to Problem 2.C.1. Results of the sieve analysis for Soils A, B, and C are given below. To obtain a more representative sample for further geotechnical testing, a ternary blend is created by uniformly mixing 8000 kg of each soil. Answer the following questions. a. If a sieve analysis is conducted on the mixture using the same set of sieves as shown above, compute the mass retained (as a percentage) and cumulative percent passing in each sieve. b. What would be the uniformity coefficient (Cu) and the coefficient of gradation (Cc) of the mixture?
For an inorganic soil, the following grain-size analysis is given:Sieve No. % Passing4 10010 9020 6440 3880 18200 13For this soil, LL = 23% and PL = 19%. Classify the soil according to:a. The AASHTO soil classificationb. The Unified soil classification system
The porosity of a silty sand soil sample is found to be 0.309. Its initial weight is 274.471 grams, and after oven drying for 24 hours, it reduces to 244.321 grams. If the density of the soil solids is 2581 kg/m3, determine the following:Bulk unit weight, Volume of voids, Volume of water to be added/evaporated per cubic meter of soil to attain 50% degree of saturation
U.S Sieve No Opening (mm) Mass of soil retained (g) 4 4.75 28 10 2.00 42 20 0.85 48 40 0.425 128 60 0.250 221 100 0.150 86 200 0.075 40 Pan 24 Determine the percent finer than each sieve and plot a grain-size distribution curve. Determine D10, D30, and D60 from the grain-size distribution curve. Calculate the uniformity coefficient, Cu. Calculate the coefficient of gradation, Cc. Classify the soil by AASHTO and USCS system. (LL = 30, PL = 10)
Q 05: (CLO 3) For a given soil, the following are given in Table: Specific Gravity Gs, bulk unit weight γ), and moisture content (w). Use data from the table according to your registration number. (You can solve answer on paper and paste neat clear image in the answer). Student Registration Number Gs γ (kN/m3) moisture content (w) % 102 2.72 17.2 20 Determine: Dry unit weight Void ratio Porosity Degree of saturation
Considering the following measurements, calculate the quantity passing and % retained applicable for sieve number 4. Total soil mass used in a sieve analysis test is 500 g Mass retained on No. 4 sieve = 9.7 g
For an inorganic soil, the following grain size analysis is given U.S sieve NO. 4 10 20 40 80 200 percent passing 100 90 64 38 18 13 For this soil , L.L = 23 and PL = 19 classify the soil according to: a- The AASHTO soil classification system. b- The unified soil classification system . Give group names and group symbols.
The consistency limits of a soil sample are: LL = 52%, PL= 35%, SL= 17%. If a specimen of this soil shrinks from a volume of 10 ?? at liquid limit to 6.1 ?? at plastic limit, determine the specific gravity of solids.
Question: For a given soil, the following are known: Percentage passing No. 4 sieve = 100 Percentage passing No. 200 sieve =61 Liquid limit = 26 Plastic Index =6 Classify the soil using the Unified Soil Classification System. Give the group symbol and the group name.
A soil sample has a unit weight of 1.9 g/cc and w=12%. If Gs of solids is 2.65, determine the volume of solids in cm3.
The Unit weight of a soil sample is 19. 6 Kilo-Newton per cubic meter. Calculate the following: a. Convert the unit in pcf (Pounds per cubic feet). b. Density in pcf (pounds per cubic feet). c. If the soil has a mass of 3 slugs, determine the volume of the soil in cubic feet. Show complete solution.
Let us assume that a soil sample taken in the field is taken and it must be identified by the SUCS Method and AASHTO Method. Moisture content = 5.75% Limit liquid = 53.5 Plastic limit = 31.6 Granulometry Sieve % Pass No. 4 100 # 40 68 # 200 54.3 Do you select the best answer? a) Inorganic silt and sand, with low plasticity b) Inorganic clay with low plasticity c) Clay silt, traces of gravel, dark Brown