Let us assume that a soil sample taken in the field is taken and it must be identified by the SUCS Method and AASHTO Method. Moisture content = 5.75% Limit liquid = 53.5 Plastic limit = 31.6 Granulometry Sieve % Pass No. 4 100 # 40 68 # 200 54.3 Do you select the best answer? a) Inorganic silt and sand, with low plasticity b) Inorganic clay with low plasticity c) Clay silt, traces of gravel, dark Brown

Let us assume that a soil sample taken in the field is taken and it must be identified by the SUCS Method and AASHTO Method. Moisture content = 5.75% Limit liquid = 53.5 Plastic limit = 31.6 Granulometry Sieve % Pass No. 4 100 # 40 68 # 200 54.3 Do you select the best answer? a) Inorganic silt and sand, with low plasticity b) Inorganic clay with low plasticity c) Clay silt, traces of gravel, dark Brown

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter3: Weight–volume Relationships

Section: Chapter Questions

Problem 3.10P

See similar textbooks

Similar questions

Q 05: (CLO 3) For a given soil, the following are given in Table: Specific Gravity Gs, bulk unit weight γ), and moisture content (w). Use data from the table according to your registration number. (You can solve answer on paper and paste neat clear image in the answer). Student Registration Number Gs γ (kN/m3) moisture content (w) % 102 2.72 17.2 20 Determine: Dry unit weight Void ratio Porosity Degree of saturation
A soil specimen has a volume of 0.06 m3 and a mass of 89.5 kg. Given: w=16%, Gs = 2.64. Determinea. Void ratio b. Porosity c. Dry unit weight d. Moist unit weight e. Degree of saturation
A saturated soil sample (S=100%) contains 28 g of soil solids and 22 g of water. The void ratio is 2.2. Calculate the following Water content (w), = porosity (n) = total (wet) density (ρT) = ____ g/cm3 dry density (ρd ) = ______ g/cm3 total unit weight (γT ) = ______ kN/m3 and specific gravity (Gs) of the soil solids = Adjust your answer to TWO decimal places. Provide step by step solution.
Coefficient Permeability of Soil A falling head permeability test is conducted on silty soil. The sample diameter is 10.0 cmand its length or thickness is 7.8 cm. The diameter of the standpipe is 6.0 mm. The head at thestart of the test is 47.8 cm. The test lasts 8.5 min and the head falls to 22.6 cm. Find thecoefficient of permeability of this soil in cm/s? Provide step by step solution.
A soil sample has a unit weight of 1.9 g/cc and w=12%. If Gs of solids is 2.65, determine the void ratio in percent. CHOICES: a.56.8 b.1.7 c.36 d.56
A soil specimen has a volume of 0.05 m3 and a mass of 87.5 kg. Given: w = 15%, Gs = 2.68. Determine Degree of saturation.
A soil sample has the following properties: Sp.gr. = 2.67, Void ratio = 0.54, Water content = 11.2%. Compute the air void ratio.
1. A sample of saturated clay was placed in a container and weighed. The weight was 6 N. The clay withcontainer was oven dried for 24 hours at 105C and weighed again as 5N. if the weight of the containeris 1 N, and specific gravity of soil solids is 2.70, determine the a) water content b) void ratio c) bulk unitweight d) dry unit weight, e) saturated unit weight f) submerged unit weight. This is the question of Soil Mechanics.
Calculate the coefficient of gradation, Cc. ? Classify the soil by AASHTO and USCS system. (LL = 30, PL = 10) ? Use this given M=Mass of soil retained in pan +∑Mass reatianed in each sieve⇒M=617 gM=Mass of soil retained in pan +∑Mass reatianed in each sieve⇒M=617 g Sieve No. Opening Size (mm) Mass retained (g) %Mass retained=MiM×100=MiM×100 %Cumulative mass retained % Finer 4 4.750 28 =28617×100%=4.54%=28617×100%=4.54% 4.54 95.46 10 2.0 42 =42617×100%=6.81%=42617×100%=6.81% 11.35 88.65 20 0.850 48 =48617×100%=7.78%=48617×100%=7.78% 19.13 80.87 40 0.425 128 =128617×100%=20.74%=128617×100%=20.74% 39.87 60.13 60 0.250 221 =221617×100%=35.82%=221617×100%=35.82% 75.69 24.31 100 0.150 86 =86617×100%=13.94%=86617×100%=13.94% 89.63 10.37 200 0.075 40 =40617×100%=6.48%=40617×100%=6.48% 96.11 3.89 Pan 24 =24617×100%=3.89%=24617×100%=3.89% 100 0 Now, to plot the GSD curve, the % finer is kept on the vertical axis and the opening size are kept on the horizontal axis -…
Following are the results from the liquid and plastic limit tests for a soil. Liquid limit test: Plastic limit test: PL = 18.7%a. Draw the flow curve and obtain the liquid limit.b. What is the plasticity index of the soil? c. Determine the liquidity index of the soil when the in situmoisture content is 26%
You are checking a field-compacted layer of soil. The laboratory control curve has the following values: gd (kN/m3) w (%) 16.34 14 16.57 16 16.65 18 16.50 20 16.26 22 15.87 24 The specification for compaction states that the field-compacted soil must be at least 95% of the maximum control density and within of the optimum moisture for the control curve. You dig a hole 1m3 in the compacted layer and extract a sample that weighs 17.2 kN wet and 14.1 kN dry. (a) What is the compacted gd? The compaction w? The percent compaction? Does the sample meet the specifications? (b) If the specific gravity is 2.68, what is the compacted degree of saturation? If the sample were saturated at constant density, what would be the water content?
A soil sample has a volume of 5200 cm3 and mass of 10.4 kg. water content of the soil is w = 12%. Determine(a) unit weight, (b) dry unit weight, (c) saturated unit weight, (d) void ratio, (e) porosity, and (f) degree ofsaturation (assume Gs = 2.7).