Question 6 of 15 Palirias > !!! Water is the working fluid in an ideal regenerative Rankine cycle with one open feedwater heater. Steam enters the turbine at 1400 lbf/in.² and 1000°F and expands to 120 lbf/in.2, where some of the steam is extracted and diverted to the open feedwater heater operating at 120 lbf/in.2 The remaining steam expands through the second-stage turbine to the condenser pressure of 6 lbf/in.² Saturated liquid exits the open feedwater heater at 120 lbf/in.2 The net power output of the cycle is 1 x 10² Btu/h. Determine for the cycle: (a) the mass flow rate of steam entering the first stage of the turbine, in lb/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent thermal efficiency. ***

Question 6 of 15 Palirias > !!! Water is the working fluid in an ideal regenerative Rankine cycle with one open feedwater heater. Steam enters the turbine at 1400 lbf/in.² and 1000°F and expands to 120 lbf/in.2, where some of the steam is extracted and diverted to the open feedwater heater operating at 120 lbf/in.2 The remaining steam expands through the second-stage turbine to the condenser pressure of 6 lbf/in.² Saturated liquid exits the open feedwater heater at 120 lbf/in.2 The net power output of the cycle is 1 x 10² Btu/h. Determine for the cycle: (a) the mass flow rate of steam entering the first stage of the turbine, in lb/h. (b) the rate of heat transfer, in Btu/h, to the working fluid passing through the steam generator. (c) the percent thermal efficiency. ***

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Water is the working fluid in a regenerative Rankine cycle with one closed feedwater heater. Steam enters the turbine at 1400 lbf/in.2 and 1000°F and expands to 120 lbf/in.2, where some of the steam is extracted and diverted to the closed feedwater heater. The remaining steam expands through the second-stage turbine to the condenser pressure of 5 lbf/in.2 Each turbine stage and the pump have isentropic efficiencies of 80%. Flow through the condenser, closed feedwater heater, and steam generator is at constant pressure. Condensate exiting the feedwater heater as saturated liquid at 120 lbf/in.2 undergoes a throttling process as it passes through a trap into the condenser. The feedwater leaves the heater at 1400 lbf/in.2 and a temperature equal to the saturation temperature at 120 lbf/in.2 The net power output of the cycle is 1 x 109 Btu/h.Determine for the cycle:(a) the mass flow rate of steam entering the first stage of the turbine, in lb/h.(b) the rate of heat transfer, in Btu/h, to…
Water is the working fluid in an ideal regenerative Rankine cycle with one open feedwater heater. Superheated vapor enters the first-stage turbine at 16 MPa, 560°C, and the condenser pressure is 8 kPa. The mass flow rate of steam entering the first-stage turbine is 310 kg/s. Steam expands through the first-stage turbine to 1 MPa where some of the steam is extracted and diverted to an open feedwater heater operating at 1 MPa. The remainder expands through the second-stage turbine to the condenser pressure of 8 kPa. Saturated liquid exits the feedwater heater at 1 MPa. Determine:(a) the net power developed, in kW.(b) the rate of heat transfer to the steam passing through the boiler, in kW.(c) the percent thermal efficiency.(d) the mass flow rate of condenser cooling water, in kg/s, if the cooling water undergoes a temperature increase of 18°C with negligible pressure change in passing through the condenser.
Problem 8.038 Water is the working fluid in a regenerative Rankine cycle with one closed feedwater heater. Steam enters the turbine at 1400 lbf/in.2 and 1000°F and expands to 120 lbf/in.2, where some of the steam is extracted and diverted to the closed feedwater heater. The remaining steam expands through the second-stage turbine to the condenser pressure of 3.5 lbf/in.2 Each turbine stage and the pump have isentropic efficiencies of 80%. Flow through the condenser, closed feedwater heater, and steam generator is at constant pressure. Condensate exiting the feedwater heater as saturated liquid at 120 lbf/in.2 undergoes a throttling process as it passes through a trap into the condenser. The feedwater leaves the heater at 1400 lbf/in.2 and a temperature equal to the saturation temperature at 120 lbf/in.2 The net power output of the cycle is 1 x 109 Btu/h.Determine for the cycle:(a) the mass flow rate of steam entering the first stage of the turbine, in lb/h.(b) the rate of heat…
In a cogeneration system, a Rankine cycle operates with steam entering the turbine at 800 lbf/in.2, 700°F, and a condenser pressure of 180 lbf/in.2 The isentropic turbine efficiency is 60%. Energy rejected by the condensing steam is transferred to a separate process stream of water entering at 250°F, 140 lbf/in.2 and exiting as saturated vapor at 140 lbf/in.2 The mass flow rate of the process stream is 50,000 lb/h. Let T0 = 70°F, p0 = 14.7 lbf/in.2
Steam and ammonia are the working fluids in a binary vapor power cycle consisting of two ideal Rankine cycles. The heat rejected from the steam cycle is provided to the ammonia cycle. In steam cycle, steam at 6 MPa, 650C enters the turbine and exits at 60C. Saturated liquid at 60C enters the pump and is pumped to the steam generator pressure. Saturated vapor of ammonia enters the turbine at 50C and exits at 1 MPa which enters the condenser and condenses to saturated liquid. The saturated liquid is then pumped through the heat exchanger. The power output of the binary cycle is 25 MW. Determine (a) the mass flow rates of steam and ammonia, (b) the power outputs of the steam and ammonia turbines, (c) the rate of heat addition to the cycle and (d) the thermal efficiency.
A Rankine cycle with reheating has a throttle pressure of 135 bars at the turbine inlet and 28 bars reheat pressure, the throttle and reheat temperature of the steam is 540 degree celsius, condenser pressureis 0.034 bar, mass flow rate of steam is 12 kg/sec. Draw the T-S and Schematic diagram of cycle and determine the following: a. Ideal turbine work b. Ideal pump work c. Theoretical thermal efficiency d. The steam rates e. Heat rate of the cycle f. Pump Work g. Turbine Work
Water is the working fluid in a regenerative Rankine cycle with one open feedwater heater.Steam enters the first-stage turbine at 100 bar, 560°C and expands to the pressure of 15bar, where some of the steam is extracted and diverted to the feedwater heater operatingat the same pressure and the remainder expands through the second-stage turbine to thecondenser pressure of 0.1 bar. Saturated liquid exits the condenser at 0.1 bar and thefeedwater heater at 15 bar. The isentropic turbine efficiency of the first-stage is 95% andthe second-stage is 85%. The isentropic pump efficiency of the first pump is 90%, and thesecond pump acts ideally. The net power developed is 210 MW.Questions:Determine:(a) the mass flow rate of the steam extracted and diverted to the feedwater heater, inkg/s(b) the rate of heat transfer rejected from the condenser, in MW
Multiple choice question: Water is the working fluid in a Rankine cycle that produces 100 MW of power. Superheated vapor enters the turbine at 70 bar, 540°C and exits at 6 kPa.Saturated liquid enters the pump at 6 kPa. The isentropic turbine efficiency is 84%, and the isentropic pump efficiency is 80%.Cooling water enters the condenser at 20°C and exits at 38°C with no significant change in pressure. What do you need to do to solve the problem? a. Analyze each component as a control volume at steady state? b. analyze each component as a closed system at steady state? c. Analyze each component as a transient control volume since steam is flowing through it? d. none of the above?
A binary vapor power cycle consists of two ideal Rankine cycles with steam and Refrigerant 134a as the working fluids. The mass flow rate of steam is 2 kg/s. In the steam cycle, superheated vapor enters the turbine at 8 MPa, 560°C, and saturated liquid exits the condenser at 50 kPa. In the interconnecting heat exchanger, energy rejected by heat transfer from the steam cycle is provided to the Refrigerant 134a cycle. The heat exchanger experiences no stray heat transfer with its surroundings. Superheated Refrigerant 134a leaves the heat exchanger at 600 kPa, 30°C, which enters the Refrigerant 134a turbine. Saturated liquid leaves the Refrigerant 134a condenser at 100 kPa.Determine:(a) the net power developed by the binary cycle, in kW.(b) the rate of heat addition to the binary cycle, in kW.(c) the percent thermal efficiency of the binary cycle.(d) the rate of entropy production in the interconnecting heat exchanger, in kW/K.
17. In a reheat cycle with one stage of reheat, the steam leaving the high-pressure turbine is reheated before it enters the low-pressure turbine. For the ideal cycle, the heat input in the boiler is 895 kW, the high-pressure turbine work output is 143 kW, the low-pressure turbine work output is 338 kW, and the input work to the pump is 15 kW. If the efficiency of the ideal reheat cycle is 42.3%, what is the heat transfer in the condenser? Express your answer in kW.
A binary vapor power cycle consists of two ideal Rankine cycles with steam and Refrigerant 134a as the working fluids. The mass flow rate of steam is 2 kg/s. In the steam cycle, superheated vapor enters the turbine at 8 MPa, 600C, and saturated liquid exits the condenser at 250 kPa. In the interconnecting heat exchanger, energy rejected by heat transfer from the steam cycle is provided to the Refrigerant 134a cycle. The heat exchanger experiences no stray heat transfer with its surroundings. Superheated Refrigerant 134a leaves the heat exchanger at 600 kPa, 30C, which enters the Refrigerant 134a turbine. Saturated liquid leaves the Refrigerant 134a condenser at 100 kPa. Determine (a) The net power developed by the binary cycle, in kW. (b) The rate of heat addition to the binary cycle, in kW. (c) The thermal efficiency of the binary cycle.
2 Water is the working fluid in an ideal Rankine cycle. Steam enters the turbine at 1400 lbf/in2 and 1200°F. The condenser pressure is 2 lbf/in.2 The net power output of the cycle is 250 MW. Cooling water experiences a temperature increase from 60°F to 76°F, with negligible pressure drop, as it passes through the condenser. a) The mass flow rate of steam, in lb/hb) The rate of heat transfer, in Btu/h, to the working fluid passing through the steam generatorc) The thermal efficiencyd) The mass flow rate of cooling water, in lb/h