Q 2 please Question OneCrude oil of specific gravity 0.85 flows upwards at a volume rate of flow of60 liters per second through a vertical venturimeter with an inlet diameter of200 mm and a throat diameter of 100 mm. The co-efficient of discharge of theventurimeter is 0.98. The vertical distance between the pressure tapping is 300mm.1- If two pressure gauges are connected at the tapping such that they arepositioned at the levels of their corresponding tapping points, determine thedifference of readings in N/cm² of the two pressure gauges.2- If a mercury differential manometer is connected, in place of pressuregauges, to the tapping such that the connecting tube up to mercury are filledwith oil, determine the difference in the level of the mercury column.Question Two (Its required to pump a liquid of specific gravity (1.26) and dynamicviscosity of (15) poise at the rate of (22) iiters per second from a sump tank anddeliver it freely at a point (105 m) away and (7 m) above the level of the sumpthrough a (150 mm) pipe. Considering the friction head lost in the pipe only andoverall efficiency is (70%), determine the power of the pump required in (KW)and (HP).FS어SF

When a fluid flows through a pipe, two forms of head loss (energy loss) enter the picture: one is…

Its required to pump a liquid of specific viscosity of (15) poise at the rate of (22) iiters per second from a sump tank and deliver it freely at a point (105 m) away and (7 m) above the level of the sump through a (150 mm) pipe. Considering the friction head lost in the pipe only and overall efficiency is (70%), determine the power of the pump required in (KW) and (HP), P

Its required to pump a liquid of specific viscosity of (15) poise at the rate of (22) iiters per second from a sump tank and deliver it freely at a point (105 m) away and (7 m) above the level of the sump through a (150 mm) pipe. Considering the friction head lost in the pipe only and overall efficiency is (70%), determine the power of the pump required in (KW) and (HP), P

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter45: Domestic Refrigerators And Freezers

Section: Chapter Questions

Problem 17RQ

See similar textbooks

Similar questions

The length of the divergent portion of venturimeter in comparison to the convergent portion is less a. True b. False
3.2 A venturi meter has an inlet diameter of 65 mm and a throat diameter of 26 mm. When measuring the flow of a liquid of density 898 kg/m3 the reading of a mercury differential pressure gauge was 71 mm. Take the coefficient of the meter as 0.97 and the specific gravity of mercury as 13.6. Estimate the flow through the meter in m3/h.
Water at 83 L/sec is flowing inside a 6-inch schedule 40 nominal pipe. Determine the following.a) What is the Reynold’s number of the water?b) What is the maximum velocity in ft/sec of the water at room temperature in the pipe?c) What is the pressure drop reading in mmHg of a pitot tube inserted in the pipe? (The fluid inside the pitot tube is mercury.) Assume a viscosity of 0.001 Pa*s and density of 1000 kg/m3.
Fundamental of fluid flow: A venturi meter with a throat diameter of 6 cm is fitted in a horizontal pipeline of 12 cm diameter with oil of specific gravity 0.88 flowing from left to the right. The difference in level in the two limbs of a mercury manometer connected to the tapping points read 12 cm and the connecting pipes are filled with the same oil. (a) If two pressure gauges are fitted at tapping points, one at the throat and the other in the inlet. Determine the difference between the 2 gage pressure readings in kPa. (b) Determine the flow in m^3/s neglecting head losses.
a venturimeter with inlet and throat diameters 300 mm and 150 mm respectively is attached in a vertical pipe in which flow occurs from bottom to top. the distance between the point of entrance and to the point of throat of the venturimeter is 750 mm. if the difference of mercury levels in the two limbs of differential gauge is 220 mm, find the discharge passing through the vertical pipe. take co-efficient of discharge, Cd = 0.98.
PROBLEM 3: A venturi meter with a throat diameter of 6 cm is fitted in a horizontal pipeline of 12 cm diameter with oil of specific gravity 0.88 flowing from left to the right. The difference in level in the two limbs of a mercury manometer connected to the tapping points read 12 cm and the connecting pipes are filled with the same oil. (a) If two pressure gauges are fitted at tapping points, one at the throat and the other in the inlet. Determine the difference between the 2 gage pressure readings in kPa.
Determine the pump head (unit: meter or kPa), using the following parameters
Answer this as fast as you can but answer should be correct (correct answer is priority) Air leaks slowly to atmosphere from a pressurized tank at 19 bar (gage) and 27°C through a hole of diameter 2 mm. The tank volume is 1 m3. Atmospheric conditions are 100 kPa and 27°C. Determine the time for the tank pressure to decrease to 100 kPa (gauge).
The venturi meter is to be installed in a schedule 40 4-in(ID=4.026 in) line to measure the flow of water. The maximum flow rate is expected to be 325 gal/min at 60°F. The 50-in manometer used to measure the differential pressure is to be filled with mercury, and water is to fill the leads above the mercury surfaces. The water temperature is to be 60°F throughout. What throat diameter should be specified for the venturi meter?A. 2 inB. 1.5 inC. 1.0 inD. 0.5 in
A differential pitot tube located at the center of a cylindrical air tube produces 2.6 in. of water pressure. What is the velocity at the impact end of the pitot tube? The impact gauge reads 2.6, 2.6, 2.5, 2.1, 1.8 when placed at points 1-5 in Fig. 3.10. What is the average velocity in the tube? What factor would be applied to the center reading to indi- cate a true average velocity? Note: In actual practice it would be necessary to check this factor through the entire range of velocities to be encountered, because variation may be expected.
Question 7 A liquid, with a density of 850 kg/m3 , is flowing downwards through a vertical pipe from a point a to a point B.The diameter at A is 150mm and the diameter at B is 75mm.Point B is 2.4m below point A.If 21 dm3 /s of the liquid flows through the pipe, the pressure gauges (connected at A and B) indicates a pressure difference of 12kPa.The loss of head across the pipe between A and B is given as KV2 /2g , where V is the velocity at A.Calculate the value of K.
3.2 A venturi meter has an inlet diameter of 65mm and a throat diameter of 26 mm. When measuring the flow of a liquid of density 898 kg/m^3 the reading of a mercury differential pressure gauge was 71 mm. Take the coefficient of the meter as 0.97 and the specific gravity of mercury as 13.6. Estimate the flow through the meter in m^3/h.