quickProblem 5.AF = 2 NSlider AC of mass 0.5 kg moves along a frictionless->horizontal guide under the action of a constantforce F = 2N. A uniform slender rod AB of mass 0.2560°kg and length 1 m is pinned to slider AC by means ofa frictionless pin at point A and a thin wire at pointB. Find the tension in the wire when released fromwirerest.Ans: Ax = 0.1460, Ay = 1.5507, T = 1.0413 NewtonsB.

Tension As a general rule, pressure alludes to the power communicated when a link, rope, wire, or…

quick Problem 5. A F = 2 N Slider AC of mass 0.5 kg moves along a frictionless horizontal guide under the action of a constant 60, 600 force F = 2N. A uniform slender rod AB of mass 0.25 kg and length 1 m is pinned to slider AC by means of a frictionless pin at point A and a thin wire at point B. Find the tension in the wire when released from wire rest. Ans: Ax = 0.1460, Ay = 1.5507, T = 1.0413 Newtons

quick Problem 5. A F = 2 N Slider AC of mass 0.5 kg moves along a frictionless horizontal guide under the action of a constant 60, 600 force F = 2N. A uniform slender rod AB of mass 0.25 kg and length 1 m is pinned to slider AC by means of a frictionless pin at point A and a thin wire at point B. Find the tension in the wire when released from wire rest. Ans: Ax = 0.1460, Ay = 1.5507, T = 1.0413 Newtons

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

The controlling force curve of a spring controlled governor is a straight line. The weight of each governor ball is 40 N and extreme radii of rotation are 10 cm and 17.5 cm. If the values of the controlling force at above radli are 205 N and 400 N respectively and friction of mechanism is equivalent to 2.5 N at each ball. Find The extreme equilibrium speeds of the governor. (1) The equilibrium speed and coefficienct of insensitiveness at a radius of 15 cm
Under some circumstances, when two parallel springswith constants k1 and k2 support a single mass, theeffective spring constant of the system is given byk 4k1k2/(k1 + k2). A mass weighing 20 pounds stretchesone spring 6 inches and another spring 2 inches. Thesprings are first attached to a common rigid supportand then to a metal plate. As the figure illustrates(see image), the mass is attached to the center of the plate in the distributiondouble spring. Determine the constant of theeffective spring for this system. find the equationof motion if the mass is initially released fromequilibrium position with downward speed of2 ft/sec.
A beam, uniform in mass, M = 47.6 kg and length L = 10.2 m, hangs by a cable supported at point B, and rotates without friction around point A. On the end far of the beam, an object of mass m = 24.3 kg is hanging. The beam is making an angle of θ = 30.9° at point A with respect to the + x-axis. The cable makes an angle φ = 21.1° with respect to the - x-axis at B. Assume ψ = θ + φ. a. Enter an expression for the lever arm for the weight of the beam, lB, about the point A. b. Find an expression for the lever arm for the weight of the mass, lm. c. Write an expression for the magnitude of the torque about point A created by the tension T. Give your answer in terms of the tension T and the other given parameters and trigonometric functions. d. Enter an expression the horizontal component of the force, Sx, that the wall exerts on the beam at point A in terms of the tension T, given parameters, and variables available in the palette. e. Enter an expression for the vertical component of…
An electric motor is accelerating a 250 kg load with acceleration of 1.2 m/s? througha gear box as shown Figure Q1(b). The rope that carries the load and spiral spring are encircled on a pulley with diameter 1.2m. Gear box ratio is 0. 1 and gear box efficiency is 100%, while gear box equivalent moment inertia is 5.55 km?. Neglect friction effect in this drive system and assume spiral spring force is X newtonCalculate the torque of the motor needed to bring up the load with acceleration1.2 m/s?.
One end of a uniform 2.60m rod with a mass of 38.0kg is supported by a cable connecting one end to the wall so that the cable makes an angle of 42.0° with respect to the rod. The other end rests against the vertical wall, where it is held in place by friction so that the rod is perfectly horizontal. A sign with an unknown mass is hung from the rod 1.90m from the wall so that wall exerts a normal force of 1790N on the rod in the positive x-direction. What is the mass of the sign in kilograms?
The circular bar shown in the figure is vertical.fixed by the support at point A in the plane. AThe spring constant connected to the support is k = 40 N/m. Broadcastingundeformed length, arc between circle ABis the distance. C fitting (bracelet) with a mass of 200 grams,connected to the spring and move in a frictionless circle bar.can. When the union is θ = 30° from the rest positionis being released. In this case, relative to point B of the fittingthe highest height it can reach and the highestcalculate the speed
Khufra works at a spring factory and he was assigned to test a certain spring, whose constant is 50 N/m attached to a 50-kg block in an incline (©=30°). With the spring initially at equilibrium position, the block was pushed 0.3 meters up the incline by a 50-N external force applied parallel to the path. The coefficient of kinetic friction is 0.30. d) How much work is done by the block (in Joules) on the spring? e) How much work is done by the applied push on the block? f) How much work is done by friction?
A box of mass m = 0.7 kg is attached to a rope which is wrapped around a physical pulley with a radius of R = 10.2 cm and a rotational inertia of I = 0.075 kg·m2. When the box is released it starts to fall down with a constant acceleration and, at the same time, the pulley starts to spin up, see the picture below. Assuming that the pulley is frictionless, what is the magnitude of the box's acceleration and what is the tension in the rope? The acceleration of the box, a ? The tension in the rope, T? If the box starts from rest and traveled downwards a distance of h = 28 cm, what is the speed of the box and what is the angular velocity of the pulley? The speed of the box, v =? The angular velocity of the pulley, ω? -------------------------------------------------------------- A Merry Go Round carousel has a radius of R = 2.4 m and a rotational inertia of I = 695 kg·m2. A 75‑kg student is on the carousel at the midpoint between the carousel's center and the rim (at R/2 distance from…
PROBLEM The diameter of two pulleys are (0.3m)and (0.2m), center distance (1m).if we use open belt drive. Determine: 1- the length of V-belt (2ß = 60°). 2- the contact angle between belt and smaller pulley. 3- the horse power, if the smaller pulley turn with speed (400r.p.m) and the tension force in tight side (T1=900N), coefficient of friction ų=0.3 4- the speed of large pulley.
An 8 ?? box resting on a horizontal, frictionless surface is attached to a 2 ?? weight by a thin, light wire that passes over a frictionless pulley. The pulley has the shape of a uniform solid disk of mass 2 ?? and diameter 0.6 ?. After the system is released, find (a) the tension in the wire on both sides of the pulley, (b) acceleration of the box, (c) horizontal and vertical components of the force that the axle exerts on the pulley.
Two masses with mass mA = 3.051 kg and mB = 21.09 kg, respectively, hang with a massless rope over a homogeneous pulley with mass mC = 40.4 kg. The mass center of the pulley is located in the middle of the pulley. The pulley is attached with a frictionless bearing in the middle. g = 9,806 m/s². Calculate the upward force with which the line affects mass B if the pulley is a homogeneous circular disc with a radius of 0.444 m.
The 10 N cylinder moves in a friction tube. Spring constants are k1 = 150 N / m and k2 = 200 N / m. When the system is at rest, d = 0.5 m. The system rotates around a fixed z-axis. In the case where d = 0.12 m, what is the coefficient of friction for the cylinder to have a constant velocity of 9.825 m / s?