rectangular lot was measured using a 50-m steel tape at 30 oC. If the recorded length and width of the lot are 197.56m and 105.63m respectively. Determine the Error in the area, if the coefficient of thermal expansion is 0.0000116/ oC and standard temperature of the tape is 25 oC. fundamentals of surveying

rectangular lot was measured using a 50-m steel tape at 30 oC. If the recorded length and width of the lot are 197.56m and 105.63m respectively. Determine the Error in the area, if the coefficient of thermal expansion is 0.0000116/ oC and standard temperature of the tape is 25 oC. fundamentals of surveying

Engineering Fundamentals: An Introduction to Engineering (MindTap Course List)

5th Edition

ISBN:9781305084766

Author:Saeed Moaveni

Publisher:Saeed Moaveni

Chapter11: Temperature And Temperature- Related Variables In Engineering

Section: Chapter Questions

Problem 10P: Calculate the thermal resistance due to convection for the following situations: a. warm water with...

See similar textbooks

Similar questions

topic: surveying A rectangular lot was measured using a 50-m steel tape at 30 oC. If the recorded length and width of the lot are 197.56m and 105.63m respectively. Determine the Error in the area, if the coefficient of thermal expansion is 0.0000116/ oC and standard temperature of the tape is 25 oC.
A rectangular lot was measured using a 50-m steel tape at 30 oC. If the recorded length and width of the lot are 197.56m and 105.63m respectively. Determine the Error in the area, if the coefficient of thermal expansion is 0.0000116/ oC and standard temperature of the tape is 25 oC.
A steel tape having a correct length at 22 degree Celsius was used to measure a base line and the recorded readings gave the total of 856.815m. I fthe average temperature during measurement was 18 degree Celsius, determine the correct length of the line.
A 30-m steel tape is of standard length at 20°C. If the coefficient of thermal expansion of steel is 0.0000116/1°C, determine the distance to be laid out using this tape to establish two points exactly 1235.65 m apart when the temperature is 33°C.
3- 50 m tape was used to measure line SF; if the measured distance was 1288.54 m. Find the corrected distance if the true length of the tape is 49.96 m, the field temperature is 33, the standard temperature is 20, the thermal expansion coefficient is 0.00002.
A steel tape, known to be of standard length at 25°C, is used in laying out a runway 1.5 km. long. Determine the temperature correction and the correct length to be laid out when the temperature is 38°C.
The ground at a particular location is covered with snowpack at – 0°C for a continuous period of three months, and the average soil properties at that location are k = 0.4 W/m-K and α = 0.15 × 10–6 m2 /s. Assuming an initial uniform temperature of 15°C for the ground, calculate the minimum depth to place the water pipes from the surface to avoid freezing.
A rectangular lot was measured using a 50-m steel tape at 30 oC. If the recorded length and width of the lot are 197.56m and 105.63m respectively. Determine the Error in the area, if the coefficient of thermal expansion is 0.0000116/ oC and standard temperature of the tape is 25 oC. detailed solution pls thank you
A steel tape is 30 meters long at 20 degree Celsius with a pull of 60 N. A rectangular lot is measured using this tape. The sides are recorded as 145 meteres and 113 meters. The average temperature of the tape during measurement is 29.4 degree Celsius with a pull of 60 N.
Calculate the thermal resistance due to convection for the following situations: a. warm water with h = 200 W/m2 K b. warm air with h = 10 W/m2 K c. warm moving air (windy situation) h = 30 W/m2 K
An incompressible air is flowing at a velocity of 60 mph through a duct 4 sq. ft. in cross-section. The duct then decreases in area towards the throat section. If the instrument records a change of 8 inches of water, what is the area of the throat? Assume standard sea level conditions inside the tube.
Hydrology Problem:A reservoir is being planned for Albuquerque, NM. The design evaporation is set as the critical period of July. Compute evaporation depth during July using the Penman method. The net radiation is 361 ly/day with a pressure of 838 mb.Max Temperature: 92°FMax Wind Speed: 7.3 mphRelative Humidity: 31%Use the equation(s) to guide you: