Refer to the circuit shown below The circuit drawn shows a balanced 3 phase A-connected source of 440 V line to line voltage supplying a balanced Y connected load of ZY 6+j8 Q tha is connected in parallel with a Delta load with ZA-15 j9 0 The transmission line impedance is ZI 1+j2 0. The source line current is A. Ia 440/120 V 440/0 V 440/-120 V Ib Ic O55.21L-122.76 O 66.89-17.54 O 4336 -78.1 O 115,76 148.1 • 25.96-55.87 None of the above

Refer to the circuit shown below The circuit drawn shows a balanced 3 phase A-connected source of 440 V line to line voltage supplying a balanced Y connected load of ZY 6+j8 Q tha is connected in parallel with a Delta load with ZA-15 j9 0 The transmission line impedance is ZI 1+j2 0. The source line current is A. Ia 440/120 V 440/0 V 440/-120 V Ib Ic O55.21L-122.76 O 66.89-17.54 O 4336 -78.1 O 115,76 148.1 • 25.96-55.87 None of the above

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.51P: A three-phase line with an impedance of (0.2+j1.0)/ phase feeds three balanced three-phase loads...

See similar textbooks

Similar questions

Two balanced three-phase loads that are connected in parallel are fed by a three-phase line having a series impedance of (0.4j2.7) per phase. One of the loads absorbs 560 kVA at 0.707 power factor lagging, and the other 132 kW at unity power factor. The line-to-line voltage at the load end of the line is 2203V. Compute (a) the line-to-line voltage at the source end of the line. (b) the total real and reactive power losses in the three-phase line, and (c) the total three-phase real and reactive power supplied at the sending end of the line. Check that the total three-phase complex power delivered by the source equals the total three-phase comp lex power absorbed by the line and loads.
It is stated that (i) balanced three-phase circuits can be solved in per unit on a per-phase basis after converting - load impedances to equivalent Y impedances. (ii) Base values can be selected either on a per-phase basis or on a three-phase basis. (a) Both statements are true. (b) Neither is true. (c) Only one of the above is true.
Two balanced Y-connected loads, one drawing 10 kW at 0.8 power factor lagging and the other IS kW at 0.9 power factor leading, are connected in parallel and supplied by a balanced three-phase Y-connected, 480-V source. (a) Determine the source current. (b) If the load neutrals are connected to the source neutral by a zero-ohm neutral wire through an ammeter, what will the ammeter read?
A three-phase line with an impedance of (0.2+j1.0)/ phase feeds three balanced three-phase loads connected in parallel. Load 1: Absorbs a total of 150 kW and 120 kvar. Load 2: Delta connected with an impedance of (150j48)/phase. Load 3: 120 kVA at 0.6 PF leading. If the line-to-neutral voltage at the load end of the line is 2000 v (rms), determine the magnitude of the line-to-line voltage at the source end of the line.
Two three-phase generators supply a three-phase load through separate three-phase lines. The load absorbs 30 kW at 0.8 power factor lagging. The line impedance is (1.4+j1.6) per phase between generator G1 and the load, and (0.8+j1) per phase between generator G2 and the load. If generator G1 supplies 15 kW at 0.8 poir factor lagging, with a terminal voltage of 460 V line-to-line, determine (a) the voltage at the load terminals. (b) the voltage at the terminals of generator G2, and (c) the real and reactive power supplied by generator G2. Assume balanced operation.
A three-phase 6OO-V circuit has two balanced loads connected in parallel, one Δ impedance 9?∠40 ° Ω and the other Y impedance 5? ∠30 ° Ω. Find the total current of the effective line and the total average power absorbed.
l. A single-phase distributor AB has a total impedance 0f (0.1+j0.2) ohms. At the far end B, a current of 80A at 0.8 pf lagging and at mid-point C a current of 100A at 0.6 pf lagging are tapped. If the voltage at B is maintained at 200V, determine the sending end voltage.
A balanced, positive-sequence, Y-connected voltage source with Eab = 480∠0o volts is applied to abalanced-∆ load with Z∆ = 30 ∠40o Ω. The line impedance between the source and load is ZL = 1 ∠850 Ω.for each phase. Calculate the line currents, the ∆ -load currents, and the voltages at the load terminals.Recall that ZY = Z∆/3
It is powered from a grounded Y-balanced three-phase source. The installations have four balanced three-phase loads: Load 1: 150 kVA Y with pf 0.8 (+), Load 2: 100 kW ∆ with pf 1.0, Load 3: 120 kW Y with pf 0.6 (-), Load 4: 80 kW and 95 kVAR (inductive - ∆). If the line impedance is 0.02 + j0.05 Ω per phase and the line voltage across the loads is 480 V, find the magnitude of the line and phase voltages at the source. Draw the phasor diagram of the voltages.
The one-line diagram of a three-phase power system is as shown in the figure attached. Impedances are marked in per unit on a 100-MVA, 400-kv base. The load at bus 2 is S(sub 2) = 15.93 MW - j33.4 Mvar, and bus 3 is S(sub 3) = 77MW + j14 Mvar. I tis required to hold the voltage at bus 3 at 400 angle 0 degrees kV. Working in per unit, determine the voltage at buses 2 and 1.
A balanced delta-connected load has phase impedances of 4+j3 Ohms. It is connected to balanced transmission lines, with Vab = 1.5kV @ 15 degrees. a) What is the current through each of the load phases? b) What is the current through each of the transmission lines? c) Which ACSR cable should be used for these transmission lines to give a 20% current rating margin for this load?
6. An abc-sequence, three-phase, 4-wire, 380-V supply is connected to an unbalanced load having phase impedances of: Za = 8 + j6 ohms, Zb = 8 - j6 ohms and Zc = 5 ohms. Impedance of the neutral wire is 0.5 + j1 ohms. Line impedance is 1+ j2 ohms per phase. Find the value of the neutral current in polar form.