SITUATION. A square footing is to support a 400 mm x 400 mm column carrying 1400 kN live load and 1200 kN dead load. The allowable soil pressure is 250 kPa. The bottom of the footing is situated 1 m below the ground surface. Assume the average unit weight of soil and concrete is 19 kN/m3. For footing, use fe' = 21 MPa and for column, use fc' 28 MPa. For all steel bars, fy 414 MPa. 1. Determine the dimensions of the footing. A 3.1 m в 3.2 m 3.3 m D 3.4 m

SITUATION. A square footing is to support a 400 mm x 400 mm column carrying 1400 kN live load and 1200 kN dead load. The allowable soil pressure is 250 kPa. The bottom of the footing is situated 1 m below the ground surface. Assume the average unit weight of soil and concrete is 19 kN/m3. For footing, use fe' = 21 MPa and for column, use fc' 28 MPa. For all steel bars, fy 414 MPa. 1. Determine the dimensions of the footing. A 3.1 m в 3.2 m 3.3 m D 3.4 m

Principles of Geotechnical Engineering (MindTap Course List)

9th Edition

ISBN:9781305970939

Author:Braja M. Das, Khaled Sobhan

Publisher:Braja M. Das, Khaled Sobhan

Chapter16: Soil Bearing Capacity For Shallow Foundations

Section: Chapter Questions

Problem 16.13P: A square footing (B B) must carry a gross allowable load of 1160 kN. The base of the footing is to...

See similar textbooks

Similar questions

A circular footing having a diameter of 1.2 m. has its bottom at a depth of 2.6 m. from the ground surface. The water table is located at a depth of 1.2 m. below the ground. The soil has the following properties: γd = 18.26 kN/m3, γsat = 19.10 kN/m3, c = 15.18 kPa, Nc = 35.06, Nq = 22.03, Nγ = 19.01. Determine the allowable load, in kN, that the footing can carry using factor of safety of 2.7
A 460 mm reinforced concrete interior spiral column carries service loads of 1025 kN dead load and 715 kN live load (Figure 3). The column rest on a square spread footing 2.75 m x 2.75 m in dimension. The net ultimate soil pressure at the base of the footing is 314 kPa, f’c =21 MPa, fy = 345 MPa, clear cover is 75 mm and 25 mm-diameter bars, the allowable soil pressure is 250 kPa? Unit weight of soil is 17kN/m3 ; unit weight of concrete is 23.5 kN/m3. The underside of footing is 1.50m below the natural grade line
A rectangular footing of breadth size 3 m and length 5 m is designed on CLAY at a depth of 1.5 m below the ground level to support a vertical load of 1200 kN. The unit weight of the soil is 19 kN/m³ and shear strength parameters are cu 65 kN/m² and θ =0°. Calculate factor of safety and take the appropriate bearing capacity coefficient Nc, Nq, and Nr, as 5.7, 1.0 and 0 respectively.
The square footing shown below must be designed to carry a 294 kN load. Use Nc = 57.8 ; Nq = 41.4 and N? = 41.1. a.) Using Terzaghi's capacity formula, determine the width B of the square footing with a factor of safety of 3.0
A square footing which carries an axial load of 13000 kg has its bottom resting on a ground water table at a depth of 2.5 m from the ground surface. Nc = 35, Nq = 22, Nγ = 19. Take PDRY = 1910 kg/m3 and PSAT = 1600 kg/m3, c = 1800 kg/m2.a. Compute the required width of the footing using a factor of safety of 2.b. Compute the ultimate bearing capacity of the soil.c. Compute the net factor of safety.
A square footing which carries an axial load of 13000 kg has its bottom resting on a ground water table at a depth of 2.5 m from the ground surface. Nc = 35, Nq = 22, Nγ = 19. Take PDRY = 1910 kg/m3 and PSAT = 1600 kg/m3, c = 1800 kg/m2. Compute the net soil pressure.
A flexible circular footing of radius R carries a uniform pressure q. Find the depth (in terms of R) at which the vertical stress below the center is 20% of q.
A 2.0 m 2.0 m square pad footing will be placed in a normally consolidated clay soil to carry a column load Q. The depth of the footing is 1.0 m. The soil parameters are: c = 0, =26, = 19 kN/m3, cu = 60 kN/m2 (=0 condition). Determine the maximum possible value for Q, considering short-term and long-term stability of the footing.
Refer to Problem 16.1. If a square footing with dimension 2 m 2 m is used instead of the wall footing, what would be the allowable bearing capacity? 16.1 A continuous footing is shown in Figure 16.17. Using Terzaghis bearing capacity factors, determine the gross allowable load per unit area (qall) that the footing can carry. Assume general shear failure. Given: = 19 kN/m3, c = 31kN/m2, =28, Df = 1.5 m, B = 2 m, and factor of safety = 3.5. Figure 16.17
A square footing (B B) must carry a gross allowable load of 1160 kN. The base of the footing is to be located at a depth of 2 m below the ground surface. If the required factor of safety is 4.5, determine the size of the footing. Use Terzaghis bearing capacity factors and assume general shear failure of soil. Given: = 17 kN/m3, c = 48 kN/m2, =31.
A 5.0 ft wide square footing is placed at 3.0 ft depth within the ground where c = 200 lb/ft2, = 25, and = 115.0 lb/ft3. Determine the ultimate bearing capacity of the footing using Terzaghis bearing capacity equation and the bearing capacity factors from Table 6.1. What is the maximum column load that can be allowed with a factor of safety of 3.0?
If the water table in Problem 16.9 drops down to 0.25 m below the foundation level, what would be the change in the factor of safety for the same gross allowable load? 16.9 A square footing is shown in Figure 16.18. Determine the gross allowable load, Qall, that the footing can carry. Use Terzaghis equation for general shear failure (Fs = 4). Given: = 17 kN/m3, sat = 19.2 kN/m3, c = 32 kN/m3, =26, Df = 1 m, h = 0.5 m, and B = 1.5 m. Figure 16.18