Table Q2(a): ParameterStudent with ODD last digits ofmatric number (AD20xxxZ)Z = 1,3,5,7,9Student with EVEN last digits ofmatric number (AD20xxxZ)Z = 0,2,4,6,8ParameterX1000 N/m1200 N/mY0.9 m1.2 mZ0.6 m0.8 m(i)At the point of contra-flexure, the value of bending moment isa) Zerob) Maximumc) Can't be determinedd) Minimum(ii)its sign.positive/negative bending moments occur where shear force changesa) Minimumb) Zeroc) Maximumd) Remains same(iii) The shear force in a beam subjected to pure positive bendinga) Positiveb) Negativec) Zerod) Cannot determine(iv) SI units of shear force isa) kN/mb) kN-mc) kNd) m/N(v)a) Hingedb) Simplec) Fixedd) Jointsupport develops support moment.

Answered: Image /qna-images/answer/35a8c233-01d7-4cce-89be-45323068dbd5.jpg

Table Q2(a): Parameter Student with ODD last digits of matric number (AD20XXXZ) Z = 1,3,5,7,9 Student with EVEN last digits of matric number (AD20xxxZ) Z = 0,2,4,6,8 Parameter 1000 N/m 1200 N/m Y 0.9 m 1.2 m 0.6 m 0.8 m At the point of contra-flexure, the value a) Zero b) Maximum c) Can't be determined d) Minimum (i) bending moment is (ii) its sign. a) Minimum b) Zero c) Maximum positive/negative bending moments occur where shear force changes d) Remains same (iii) The shear force in a beam subjected to pure positive bending is a) Positive b) Negative c) Zero d) Cannot determine (iv) SI units of shear force is a) kN/m b) kN-m c) kN d) m/N (v) support develops support moment. a) Hinged b) Simple c) Fixed

Table Q2(a): Parameter Student with ODD last digits of matric number (AD20XXXZ) Z = 1,3,5,7,9 Student with EVEN last digits of matric number (AD20xxxZ) Z = 0,2,4,6,8 Parameter 1000 N/m 1200 N/m Y 0.9 m 1.2 m 0.6 m 0.8 m At the point of contra-flexure, the value a) Zero b) Maximum c) Can't be determined d) Minimum (i) bending moment is (ii) its sign. a) Minimum b) Zero c) Maximum positive/negative bending moments occur where shear force changes d) Remains same (iii) The shear force in a beam subjected to pure positive bending is a) Positive b) Negative c) Zero d) Cannot determine (iv) SI units of shear force is a) kN/m b) kN-m c) kN d) m/N (v) support develops support moment. a) Hinged b) Simple c) Fixed

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

if a 136.51g Al rod (c=0.900 j/g°C) is at 100.0°C and placed into 250.0g of water at 21.8°C, what is the temperature of the system (rod + water) at equilibrum assuming no losses to the surrounding? a) 46°Cb) 30°Cc) 206°Cd) 18°C
2. A fan discharges 265 cu.m/min of air through a duct of 92 cm in diameter against a static pressure of 0.022 m of water. The fluid density is 995 kg/cu.m., the air temperature is 29°C and the barometric pressure reading is 730 mm Hg. If the power input to the fan is measured 3.5 hp, what are the total and static fan efficiencies?
Given that a particular gas has the following data:• pressure is 101.325 kPa,• temperature is 16°C, and• volume is 2.83 m³and these are compressed into a storage vessel of 0.31 m³ capacity.Before admittance, the storage vessel contained the gas has the following data:• pressure is 137.8 kPa, and• temperature is at 24°C.After admittance, the pressure has risen to 1171.8 kPa.Determine the final temperature of the gas in the vessel (in Kelvin)
Initial condition: P = 0.7 MPax = 96 %Process: ThrottlingFinal condition: P = 0.35 MPaRequired: Δs
A fire hose has an inside diameter of 6.5 cm. Suppose such a hose carries a water flow of 40.5 L/s starting at a gauge pressure of 1.68 × 106 N/m2 . The hose discharges through a nozzle having an inside diameter of 3.4 cm. Take the viscosity of water to be 1.005 × 10-3 (N/m2)⋅s dh = 6.5 cmdn = 3.4 cmP = 1.68 × 106 N/m2Q = 40.5 L/s a. the Reynolds number, NR, for flow in the fire hose to show that the flow must be turbulent, with NR≥ 3000. b. Calculate the Reynolds number, NR, for flow in the fire hose and nozzle to show that the flow must be turbulent, with NR≥ 3000.
2. Find the Diameter of a wind turbine rotor which generates 210 kW of electrical power output in a steady wind velocity of 8.5 m/sec with the power coefficient is 63%. The gear, generator and electric efficiencies are 95%, 96% and 89% respectively. Assume the atmospheric air condition is 1.01325 bar, Gas Constant R = 287 J/kg K at 29°C.
Provide clear and complete solution as well as diagram. The discharge pressure of an air compressor is 8 times the suction pressure. If volume flow at suction is 0.23 m3/s, what is the compressor power assuming n equals 1.35 and suction pressure is 97 kPa? A. 64.58 kW C. 60.45 kWB. 61.48 kW D. 71.5 kW
A 45 grams (0.045 kg) golf ball of diameter equal to 43 mm fell into a 2m deep lake. Neglect inertia at the moment of impact. Assume viscosity of 1.12x10-3 Ns/m2 , water density of 1,000 kg/m3 and Cd=0.5. Sphere volume equals 4π r³ /3. 1. How long will it take from the moment it hits the surface until it gets to the bottom? 2. If one estimates the Cd with Cd=24/Re formula, the settling velocity would be unrealistically large. Why?
Liquid water is throttled at 50 bar and 100 ° C up to 25 bar. Estimate the temperature change of the fluid in degrees Celsius if a) the fluid is incompressible b) if a linear interpolation is used for the compressed liquid data. a) Use CD data. b) Use steam tables
Plz solve this question completely (handwritten solution acceptable)
Suppose we got the following data during a test of a 2- stroke engine in which gas is usedas a fuel:Diameter of the piston = 149 mmStroke length = 179 mmClearance volume = 0.88 literrpm of the engine = 302Indicated mean effective pressure = 6.0 barGas consumption = 6.0 m3/hCalorific value of the gas (fuel) = 16990 kJ/m3Make a clear sketch the geometry of this engine using the data and determine thefollowing:i. Indicated power developed by the engine in watt.ii. Air Standard Efficiencyiii. Indicated thermal efficiency of the engine.
Complete the following table for refrigerant-134a. Show your work and explain how you got your values. T (oF) P psia) h (Btu/Ibm) X Phase description 80 78 15 0.6 10 70 180 129.46 110 1.0