Tailwind, Inc., produces high-quality but expensive training shoes for runners. The Tailwind shoe, which sells for $210, contains both gas- and liquid-filled compartments to provide more stability and better protection against knee, foot, and back injuries. Manufacturing the shoes requires 10 separate tasks. There are 400 minutes available for manufacturing the shoes in the plant each day. Daily demand is 62. The information for the tasks is as follows: Task Performance Time (mins) Predecessors A 1 − B 3 A C 1 B D 4 B E 1 C, D F 3 A G 2 F H 5 G I 3 E, H J 2 I a-b) The correct precedence relationship with one of the possible assignments of tasks using the "ranked positionedweight" to workstations is shown in Fig 1, 2 or 3 c) The efficiency of the assembly line with 5 workstations shown in the figure chosen above=% (enter your response as a percentage rounded to one decimal place). d) The idle time for the assembly line per cycle = minute(s) (enter your response as a whole number).

Tailwind, Inc., produces high-quality but expensive training shoes for runners. The Tailwind shoe, which sells for $210, contains both gas- and liquid-filled compartments to provide more stability and better protection against knee, foot, and back injuries. Manufacturing the shoes requires 10 separate tasks. There are 400 minutes available for manufacturing the shoes in the plant each day. Daily demand is 62. The information for the tasks is as follows: Task Performance Time (mins) Predecessors A 1 − B 3 A C 1 B D 4 B E 1 C, D F 3 A G 2 F H 5 G I 3 E, H J 2 I a-b) The correct precedence relationship with one of the possible assignments of tasks using the "ranked positionedweight" to workstations is shown in Fig 1, 2 or 3 c) The efficiency of the assembly line with 5 workstations shown in the figure chosen above=% (enter your response as a percentage rounded to one decimal place). d) The idle time for the assembly line per cycle = minute(s) (enter your response as a whole number).

Name: Tailwind, Inc., produces high-quality but expensive training shoes fo
Uploaded: 2024-03-20T06:57:05.000Z
Channel: Bartleby
Description: Tailwind, Inc., produces high-quality but expensive training shoes for runners. The Tailwind shoe, which sells for $210, contains both gas- and liquid-filled compartments to provide more stability and better protection against knee, foot, and b

Practical Management Science

6th Edition

ISBN:9781337406659

Author:WINSTON, Wayne L.

Publisher:WINSTON, Wayne L.

Chapter4: Linear Programming Models

Section: Chapter Questions

Problem 111P

See similar textbooks

Similar questions

Terry, Inc., makes gasoline storage tanks. All production is done under contract. The company makes three basic models, but each model must be adapted to customer specifications for the location of outlets, insulation, and paint. It takes from three to six months to complete a tank. How should Terry account for the income for the business?
The president of HiU Enterprises, Terri Hill, projects the firm's aggregate demand requirements over the next 8 monthsas follows: Her operat ions manager is considering a new pla n, whichbegins in January with 200 uni ts on hand . Stockout cost of lostsales is SlOO per unit. Inventory holding cost is $20 per unit permonth. Ignore any idle-time costs. The plan is called plan A.Plan A: Vary the workforce level to execute a strategy that producesthe quantity demanded in the prior month. The Decemberdemand and rate of production are both I ,600 units per month. Thecost of hiring additional workers is $5,000 per I 00 uruts. The cost oflaying oiTworkers is $7,500 per 100 units. Evaluate this plan.
Tuff-Rider, Inc., manufactures touring bikes and mountain bikes in a variety of frame sizes, colors, and component combinations. Identical bicycles are produced in lots of 110. The projected demand, lot size, and time standards are shown in the following table: Item Touring Mountain Demand forecast 4,000 units/year 12,000 units/year Lot size 100 units 110 units Standard processing time 0.25 hour/unit 0.50 hour/unit Standard setup time 2 hours/lot 3 hours/lot The shop currently works 8 hours a day, 5 days a week, 52 weeks a year. It operates five workstations, each producing one bicycle in the time shown in the table. The shop maintains a 15 percent capacity cushion. How many workstations will be required next year to meet expected demand without using overtime and without decreasing the firm's current capacity cushion? The number of workstations required next year is ?(Enter your response rounded up to the next whole number.)
Upton Enterprises produces a variety of switches. Below, you will find a bill-of-material file for their simplest switch: Part A. The number in the parentheses represents the number of units required for the upper level. LT stands for the lead time, measured in weeks.Assuming that Upton Enterprises has none of Switch A in inventory, and the inventory levels of Parts B, C, D, E, and F are also zero, how many weeks would it take to produce 100 units of Switch A? What would be the total requirement for part E?
Tuff-Rider, Inc., manufactures touring bikes and mountain bikes in a variety of frame sizes, colors, and component combinations. Identical bicycles are produced in lots of 100. The projected demand, lot size, and time standards are shown in the following table: Item Touring Mountain Demand forecast Lot size Standard processing time Standard setup time 5,000 units/year 100 units .25 hour/unit 2 hours/lot 10,000 units/year 100 units .50 hour/unit 3 hours/lot The shop currently works 8 hours a day, 5 days a week, 50 weeks a year. It operates five workstations, each producing one bicycle in the time shown in the table. The shop maintains a 15 percent capacity cushion. How many workstations will be required next year to meet expected demand without using overtime and without decreasing the firm’s current capacity cushion?
Heather Adams, production manager for a Colorado exercise equipment manufacturer, needs to schedule an order for 50 UltimaSteppers, which are to be shipped in week 8. Subscripts indicate quantity required for each parent. Assume lot-for-lot ordering. b. Choose correct time phased-structures c. Develop a net material requirements plan for F (enter your responses as whole numbers).
Can you say if it is better to carry inventory or create back orders? Discuss the pros and cons of each
Lawn King produces a couple models of push lawn mowers. A total of 60 workers are currently employed to work on the assembly line. Hiring cost is $800 for each new employee, while the cost of laying off an employee is $1200. The production strategy in current use is a one-shift-per-day level strategy at average demand. Differences between demand and production are balanced by inventory and backorders. If a backorder occurs, the order is filled from the next available production run and safety stock is consumed if needed and replenished later. Lawn King utilizes a $7/unit carrying cost per month for inventory, and backorders have a cost of $10/unit per month. Production is estimated at 5 mowers per worker per shift, and the assembly line operates 20 working days (shifts) per month. Lawn King keeps 500 mowers as safety stock, which will be the beginning inventory for September. The regular time cost of production is $50 per lawn mower. [Hint: production = (# of…
The Morning Brew Coffee Shop sells Regular, Cappuccino,and Vienna blends of coffee. The shop’s current daily laborcost is $320, the equipment cost is $125, and the overheadcost is $225. Daily demands, along with selling price and ma-terial costs per beverage, are given below.Harald Luckerbauer, the manager at Morning Brew Cof-fee Shop, would like to understand how adding Eiskaffee (aGerman coffee beverage of chilled coffee, milk, sweetener,and vanilla ice cream) will alter the shop’s productivity. Hismarket research shows that Eiskaffee will bring in new cus-tomers and not cannibalize current demand. Assuming thatthe new equipment is purchased before Eiskaffee is added tothe menu, Harald has developed new average daily demandand cost projections. The new equipment cost is $200, andthe overhead cost is $350. Modified daily demands, as wellas selling price and material costs per beverage for the newproduct line, are given below. a. Calculate the change in labor and multifactor…
As the production planner for Xiangling Hu Products, Inc., you have been given a bill of material for a bracket that is made up of a base, 2 springs, and 4 clamps. The base is assembled from 2 clamps and 1 housing. Each clamp has 1handle and 1 casting. Each housing has 2 bearings and 2 shafts. There is no inventory on hand. c) Compute the net quantities needed if there are 25 of the base and 100 of the clamp in stock. Base: units (enter your response as a whole number). Spring: units Clamp: units Housing: units Handle units Casting: units Bearing: units Shaft: units
Materials Management $12.00 per purchase order Chemical Processing $7.50 per metric ton Molding $24.00 per direct labor hour Packaging $0.10 per unit Engineering designs show that the order will require direct materials that cost $540; direct labor cost will be $90. The order will require four purchas orders to be placed, use two metric tons of chemical base, and need eight direct labor hours. The size of the order is to produce 3,000 units of product. How to calculate the total production of the order?
CarCity is a big retailer for car parts and accessories. The store stocks different types and sizes of car tire. One of the best selling tires is the Tiger Model R125, which is currently purchased from a factory in Indonesia. An analysis of the purchasing operation shows that approximately 3 labor hours are required to process a purchase order, regardless of the quantity purchased. Salaries in the purchasing Department average OMR 12 per hour, including employee benefits. In addition, a detailed analysis of 15 previous purchase orders showed that OMR 132 was spent on telephone, paper, and other consumables directly related to the ordering process . Shipping cost from Indonesia is OMR 230 for a container. A container has a capacity of 800 tires. The lead time for shipments from Indonesia is 15 days. Finally, CarCity’s financial analysts established a holding cost of 20% for this type of tire. The annual demand for the R125 tire is constant at a rate of 8400 units. The store purchases…