The 200 mm-radius brake drum is attached to a larger fiywheel. The total mass moment of inertia of the fywheel and drum is 9 kg mand the coefficient of kinetic friction betweenthe drum and the brake shoe is 0.35. Knowing that the initial angular velocity of the nywheels 360 rpm dockwise. determine the vertical force P that must be applied to the pedal Cifthe system is to stop in 100 revolutions150 mm250 mmB.200 mm375 mmSelect oneOAP=317.22NOB.P172.68 NOC.P-150.26NODP=269 17N

F= frictional force Rn= Normal reaction at the brake interface

The 200 mm-radius brake drum is attached to a larger flywheel. The total mass moment of inertia of the fywheel and drum is 9 kg mand the coefficient of kinetic friction between the drum and the brake shoe is 0.35. Knowing that the initial angular velocity of the flywheel is 360 rpm dockwise. determine the vertical force Pthat must be applied to the pedal Ci the system is to stop in 100 revolutions

The 200 mm-radius brake drum is attached to a larger flywheel. The total mass moment of inertia of the fywheel and drum is 9 kg mand the coefficient of kinetic friction between the drum and the brake shoe is 0.35. Knowing that the initial angular velocity of the flywheel is 360 rpm dockwise. determine the vertical force Pthat must be applied to the pedal Ci the system is to stop in 100 revolutions

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Related questions

Q: 2) A slender uniform 30 kg bar is hinged off center and swings down on a vertical plane. In the…

A: Free Body diagram for the given figure is, Consider 2 component of force on the hinge, =Nx & Ny…

Q: 3. The 10-in.-radius brake drum is attached to a larger flywheel which is not shown. The total mass…

Q: The rotor of an electric motor has a mass of 25 kg, and it is observed that 4.2 min is required for…

A: Given Data: Mass of the rotor is M = 25 kg. The initial angular velocity of the rotor is ωi = 3600…

Q: The cylinder shown is of weight W and radius r, and the coefficient of static friction μs is the…

A: Given data: *The coefficient of static friction is same at A and B μA= μB. *The weight of the…

Q: The double pulley shown has a mass of 15 kg and a centroidal radius of gyration of 160 mm. Cylinder…

A: Let rA be the radius of the outer pulley and rB that of the inner pulley. Write the expression of…

Q: When the 18-kg wheel shown is attached to a balancing machine and made to spin at a rate of 12.5…

A: Write the expression of the angular velocity. Write the expression of the force acting on the…

Q: The 8-in. radius brake drum is attached to a larger flywheel that is not shown. The total mass…

A: The kinetic friction between drum and shoe will be responsible for loss of Kinetic Energy of drum…

Q: A 200-kg flywheel is at rest when a constant 300 N.m couple is applied. After executing 560…

A: Write the expression of the moment of inertia of the flywheel. Write the expression of the initial…

Q: 150 mm A 5 kg 1 m 250 mm Your Answer: 30⁰ 4 The double pulley shown has a mass of 16.3 kg and a…

Q: Wheel A, of 30kg, is located in the position shown by the effect of idler wheel D (frictionless…

Q: A drum of 40 mm radius Is attached to a disk of 100 mm radlus. The disk and drum have a total mass…

Q: Chapter 6, Problem 6.185 The base B has a mass of 6.3 kg and a radius of gyration of 126 mm about…

Q: cylinder shown has a weight of 100lb Assuming the cylinder to be solid in determining the moment of…

A: GivenW=100lbP=10lbs=10ft

Q: A drum of 4-in. radius is attached to a disk of 8-in. radius. The disk and drum have a total weight…

A: Draw the Free Body Diagram for the above problem. Write the expression for linear acceleration and…

Q: The 200-mm radius brake drum is attached to a larger flywheel that is not shown. The total mass…

A: calculated the number of revolutions executed by the flywheel before it comes to rest.

Q: The steel roll shown has a mass of 1200 kg, has a centroidal radius of gyration of 150 mm, and is…

A: Given data m=1200 kgk=0.15 mTA=3000 N

Q: A of students conducts an experiment with an object made of two uniform disks, each of radius R,…

A: (a) Consider the diagram shown below for the pulley. After one revolution of the pulley, the…

Q: PROBLEM 16.29 The 100-mm-radius brake drum is attached to a flywheel which is not shown. The drum…

Q: The 4-kg rod AB is attached to a collar of negligible mass at A and to a flywheel at B. The flywheel…

A: Moments of inertia Rod AB: TAB=112mABI2AB=1124×0.72=0.1728 kg.m2 Flywheel:…

Q: The 10-in.-radius brake drum is attached to a larger flywheel which is not shown. The total mass…

Q: The flywheel of a small punch rotates at 300 rpm. It is known that 1800 ft-lb of work must be done…

Q: 2) A slender uniform 30 kg bar is hinged off center and swings down on a vertical plane. In the…

Q: The double pulley shown has a mass moment of inertia of 15 lb·ft-s^2 and is initially at rest. If…

A: Given: The mass moment inertia of pulley, I = 15 lb.ft/s2 The radius of pulley, r = 9 in

Q: The 10-in.-radius brake drum is attached to a larger flywheel which is not shown. The total mass…

Q: A 6000-lb flywheel requires 1500 revolutions to coast to rest from an angular velocity of 300 rpm.…

A: A moment of inertia is a mass of the body when a body is rotating on an axis. The moment of inertia…

Q: A band and block brake having 10 blocks, each of which subtends an angle of 14o at center, is…

A: The free body diagram of band and block brake is as follows: Calculate the moment about point O is…

Q: The 4-kg uniform slender bar BD is attached to bar AB and a wheel of negligible mass that rolls on a…

A: Apply the kinematics to the given system. Therefore,

Q: In the pivoted motor mount shown, the weight W of the 175-lb motor is used to maintain tension in…

A: Free Body Diagram of the given motor-mount set up is shown below:…

Q: The steel roll shown has a mass of 1200 kg, a centroidal radius of gyration of 150 mm, and is lifted…

A: To find : a) the angular acceleration of the roll b) the acceleration of its mass centre . Given :…

Q: Problem 2: The drum shown weighs 80lb and has a mass moment of inertia about O of 0.8 lb.ft?.…

Q: The steel roll shown has a mass of 1200 kg, a centroidal radius of gyration of 150 mm, and is lifted…

A: Given Data Mass = 1200Kg MOI, I=mk2=1200(0.150m)2=27Kgm2. radius, r=d/2=(0.100)/2=0.050m TA=3100N…

Q: A stationary horizontal plate is attached to the ceiling by means of a fixed vertical tube. A wheel…

A: Consider the diagram shown below for the wheel. Angular momentum of the wheel is

Q: -. In order to determine the mass moment of inertia of a 4-toot liameter flywheel, the flywheel is…

Q: The rotor of an electric motor has an angular velocity of 4500 rpm when the load and power are cut…

A: Given data: - The speed of the rotor of an electric motor is N = 4500 rpm. The mass of rotor is M…

Concept explainers

Clutches, Brakes, Couplings, and Flywheels

The clutch is described as a machine element used to connect or disconnect two shafts together to transmit torque or power. The clutch works on the principles of friction. The clutch is commonly used in automobiles to transfer power from the driving shaft to the driven shaft.

Question

The 200 mm-radius brake drum is attached to a larger fiywheel. The total mass moment of inertia of the fywheel and drum is 9 kg mand the coefficient of kinetic friction between
the drum and the brake shoe is 0.35. Knowing that the initial angular velocity of the nywheels 360 rpm dockwise. determine the vertical force P that must be applied to the pedal Cif
the system is to stop in 100 revolutions
150 mm
250 mm
B.
200 mm
375 mm
Select one
OAP=317.22N
OB.P172.68 N
OC.P-150.26N
ODP=269 17N

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

Step 2

Step 3

Step 4

Trending now

This is a popular solution!

Step by step

Solved in 4 steps with 4 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Clutches, Brakes, Couplings and Flywheels

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The 8-in. radius brake drum is attached to a larger flywheel that is not shown. The total mass moment of inertia of the drum and the flywheel is 15 lb.ft.s2 and the coefficient of kinetic friction between the drum and the brake shoe is 0.40. Knowing that the angular velocity of the flywheel is 450 rpm clockwise when a force P of magnitude 65 lbf. is applied to the pedal C, determine the number of the revolutions executed by the flywheel before it comes to rest. (The final answer should be in two decimal places with correct units)
The 10-in.-radius brake drum is attached to a larger flywheel which is not shown. The total mass moment of inertia of the flywheel and drum is 22 lb ⋅ ft ⋅ s 2 and the coefficient of kinetic friction between the drum and the brake shoe is 0.41. Knowing that the initial angular velocity is 255 rpm clockwise, determine the force which must be exerted by the hydraulic cylinder at point B if the system is to stop in 85 revolutions.
The 10-in.-radius brake drum is attached to a larger flywheel which is not shown. The total mass moment of inertia of the flywheel and drum is 22 lb ⋅ ft ⋅ s 2 and the coefficient of kinetic friction between the drum and the brake shoe is 0.41. Knowing that the initial angular velocity is 255 rpm clockwise, determine the force which must be exerted by the hydraulic cylinder at point B if the system is to stop in 85 revolutions. determine the force which must be exerted by the hydraulic cylinder at point B if the system is to stop in 85 revolutions. DO NOT ROUND OFF IN THE SOLUTION. ROUND OFF ONLY IN 2 DECIMAL PLACE IN THE FINAL ANSWER.
The 10-in.-radius brake drum is attached to a larger flywheel which is not shown. The total mass moment of inertia of the flywheel and drum is and the coefficient of kinetic friction between the drum and the brake shoe is 0.40. Knowing that the initial angular velocity is 240 rpm clockwise, determine the force that must be exerted by the hydraulic cylinder if the system is to stop in 75 revolutions.
The rotor of an electric motor has an angular velocity of 3570 rpm when the load and power are cut off. The 65-kg rotor, which has a centroidal radius of gyration of 175mm, until it reaches the maximum speed of 5250 rpm. Knowing that the kinetic friction results in a couple of magnitude 4.5 N.m exerted on the rotor, determine the number of revolutions that the rotor executes, before achieving its maximum speed and the time it took. (The final answer should be in two decimal places with correct units)
It takes 10 min for a 2.4-Mg flywheel to coast to rest from an angular velocity of 300 rpm. Knowing that the radius of gyration of the flywheel is 1 m, determine the average magnitude of the couple due to kinetic friction in the bearing.
The rotor of an electric motor has an angular velocity of 3600 rpm when the load and power are cut off. The 120-lb rotor, which has a centroidal radius of gyration of 9 in., then coasts to rest. Knowing that kinetic friction results in a couple of magnitude 2.5 lb·ft exerted on the rotor, determine the number of revolutions that the rotor executes before coming to rest.
A drum of 4-in. radius is attached to a disk of 8-in. radius. The disk and drum have a total weight of 10 lb and a combined radius of gyration of 6 in. A cord is attached as shown and pulled with a force P of magnitude 5 lb. Knowing that the disk rolls without sliding, determine (a) the angular acceleration of the disk and the acceleration of G, (b) the minimum value of the coefficient of static friction compatible with this motion.
Each of the gears A and B has a mass of 675 g and a radius of gyration of 40 mm, while gear C has a mass of 3.6 kg and a radius of gyration of 100 mm. Assume that kinetic friction in the bearings of gears A, B C produces couples of constant magnitude 0.15 N.m, 0.15 N.m, 0.3 N.m, respectively. Knowing that the initial angular velocity of gear C is 2000 rpm, determine the time required for the system to come to rest.
A bar of mass m = 5 kg is held as shown between four disks each of mass m’ = 2 kg and radius r = 75 mm. Knowing that the forces exerted on the disks are sufficient to prevent slipping and that the bar is released from rest, for each of the cases shown, determine the velocity of the bar after it has moved through the distance h.
The double pulley shown has a mass of 15 kg and a centroidal radius of gyration of 160 mm. Cylinder A and block B are attached to cords that are wrapped on the pulleys as shown. The coefficient of kinetic friction between block B and the surface is μs = 0.2. Given that the system is at rest when the 200 N force is applied to cylinder A, determine the velocity of cylinder A as it strikes the ground.
A rope drum of diameter 850 mm and mass 1000 kg is used in a machine lifting procedure. The drum reaches a top rotational speed of 475 rev/min from rest in a time of 25 s. Determine: (i) the maximum linear speed of the rope;(ii) the angular acceleration of the rope drum;(iii) the moment of inertia of the rope drum, given that its radius of gyration is 250 mm;(iv) the accelerating torque applied to the rope drum.