The 9.75 m long beam is simply supported at A and B shown below with a uniformly distributed load (UDL) between A and C of 4.75 kN/m and a concentrated point load of 12.50 kN at point D (i.e., midpoint between C & B). Determine the bending moment in kilonewton metres (kNm) at the midpoint of AB (i.e., mid-beam). Assume the beam is weightless and give your answer in kilonewtons (kN) to 2 decimal places.

The 9.75 m long beam is simply supported at A and B shown below with a uniformly distributed load (UDL) between A and C of 4.75 kN/m and a concentrated point load of 12.50 kN at point D (i.e., midpoint between C & B). Determine the bending moment in kilonewton metres (kNm) at the midpoint of AB (i.e., mid-beam). Assume the beam is weightless and give your answer in kilonewtons (kN) to 2 decimal places.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

For the beam shown, an additional concentrated moment load (clockwise) is applied at the propped end with magnitude of 1200 kN-m and a uniform load of 40 kN/m applied at the entire span. If P = 100 kN and L= 8 m
The inverted T section of 6 m overhang bearn has the properties shown. The beam carries a uniformly distributed load W_{0} over its entire length and a concentrated load of 5 KN, 3 m from the rightmost support. Determine W_{0} if f b(T) =30 MPa and f b(C) =70 MPa
Determine the maximum moment of a 6 meter simply supported beam with a uniformly distributed load of 8 KN/m all throughout its length and a 7 KN concentrated load at the midspan.
A simply supported beam 8 m long has an overhang of 1.7 m at the left support. If a highway uniform load of 11.67 kN/m and a concentrated load of 127 kN, passes thru the beam, compute the maximum positive moment (kN-m) at mid span.
A 7-meter simple beam is loaded with a varying load that varies from 0 kN/m to 40 kN/m applied at 1 m and 4 meters from the left support respectively. Compute the 6Ab/L of the beam.
A simply supported 4-m long beam is made up of 80% grade Malugai. The beam is carrying a uniform load of 10 KN/m all through out its length and a concentrated load of 500 N at the midspan. The cross-sectional area of the beam is indicated below. What is the maximum shear of the beam in KN? What is the maximum moment of the beam in KN.m?
2. A horizontal beam AG is subjected to vertical concentrated forces at B of 200KN acting downward 3m to the right of A and at G of 100KN upward 5m to the right of F, a uniformly distributed load of 20KN/m between C and D with a span of 4m and a distributed load varying linearly from zero at E to maximum of 10KN/m at F with a span of 6m. If C is2 m to the right of B and Dis 3m to the left of E. Find the magnitude of the resultant and its position from G Show solution, formula, and FBD and pls legibly
an 8 meter propped beam (fixed at the left) is loaded with 100 kn-m counterclockwise moment at the propped beam end. It is loaded with 80 kn at the midspan and 40 kn/m uniform load applied in 1 m from the fixed support to the propped end. Compute the maximum moment of the beam.
For the beam and loading shown below (L = 2.4 m, E = 200 GPa, I = 1000 mm4 and w = 30 kN/m), find (a) TThe slope at point D.(b) The reaction force at end A
Determine the magnitude of F so that the resultant couple moment acting on the beam is 1.5 kN.m clockwise ?
Determine the maximum bending stresses for a rectangular beam (20x40cm) subjected to a bending moment Mz = 60 kN.m.
A horizontal beam AG is subjected to vertical concentrated forces at B of 100KN acting downward 3m to the right of A and at G of 200KN upward 5m to the right of F, a uniformly distributed load of 10KN/m between Cand with a span of 4m and a distributed load varying linearly from zero at Eto a maximum of 30KN/m at F with a span of 6m. If C is 2m to the right of B and D is 3m to the left of E. Find the magnitude of the resultant and its position from A. Show solution, formula and the FBD and pls write legible