The absolute pressure in the tank is found to be1.206 bar. In the measurement of this pressurea U-tube manometer was used. The differencein level was found to be 72,5 cm. Thebarometric pressure was 72 cm ofDetermine the specific weight of the liquid usedin the manometer. A standard atmosphericpressure = 1.01325 bar.

Name: The absolute pressure in the tank is found to be1.206 bar. In the mea
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: The absolute pressure in the tank is found to be1.206 bar. In the measurement of this pressurea U-tube manometer was used. The differencein level was found to be 72,5 cm. Thebarometric pressure was 72 cm ofDetermine the specific weight of the liquid

barometric pressure = pressure of atmosphere at the given location in terms of mercury

Answered: Determine the specific weight of the…

Engineering

Mechanical Engineering

Determine the specific weight of the liquid used in the manometer. A standard atmospheric A eura 10132s ber

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.121P: One side of the container has a 03-m square door that is hinged at its top edge. If the container is...

See similar textbooks

Similar questions

A gasoline line is connected to a pressure gage through a double-U manometer, as shown. If the reading of the pressure gage is 260 kPa, determine the gage pressure of the gasoline line. Assume the density of air to be 1.225 kg/m^3.
A tank of water 4 m deep receives a constant upwardacceleration a z . Determine ( a ) the gage pressure at the tankbottom if a z = 5 m 2 /s and ( b ) the value of a z that causes thegage pressure at the tank bottom to be 1 atm.
A gasoline line is connected to a pressure gage through a double-U manometer, If the reading of the pressure gage is 260 kPa, determine the gage pressure of the gasoline line
Determine the pressure of compressed air in an air vessel if the manometer mounted on it shows a pressure of 3 m of mercury. Assume density of mercury to be 13.6×10^3 kg/m^3 and atmospheric pressure as 101 kpa
The pressure of water in a pipeline was measured by means of a simple manometer containing mercury. The mercury level in the open tube is 160 mm higher than that of the left tube. The height of water in the left tube is 43mm. Determine the static pressure in the pipe in a).kN/m2. b) Head of water in meters, 1: The static pressure in the pipe in kN/m2 ? 2: Head of water in meters ?
The pressure of water in a pipeline was measured by means of a simple manometer containing mercury. The mercury level in the open tube is 160 mm higher than that of the left tube. The height of water in the left tube is 36mm. Determine the static pressure in the pipe in a).kN/m2. b) Head of water in meters,
A U-tube manometer filled with mercury is attached to a gas tank. The level ofmercury on the open end of the manometer is 40 cm higher than the level at theend attached to the tank. What is the gage pressure of the gas inside the tank? a) what is the absolute pressure of the gas inside the tank? b) if the level of mercury on the open end is 60 cm lower than the level atthe end attached to the tank, what is the absolute pressure of the gas?
Capillary rise in the glass tube used for measuring water level isnot to exceed 0.5 mm. Determine its minimum size, given thatsurface tension for water in contact with air = 0.07112 N/m.
Determine the height of mercury in mm of Hg for a manometer if the gauge pressure is 99.84 kPa and the density of mercury is 13,570 kg/m3
A gasoline line is connected to the pressure gage through a double-U manometer, as shown in the figure. If the reading of the pressure gage is 370 kPa, determine the gage pressure of the gasoline line.6)
The pressure of water in a pipeline was measured by means of a simple manometer containing mercury. The mercury level in the open tube is 165 mm higher than that of the left tube. The height of water in the left tube is 42mm. Determine the static pressure in the pipe in a).kN/m2. b) Head of water in meters, A) The static pressure in the pipe in kN/m2 B) Head of water in meters =
What is the difference between gage pressure and absolute pressure?