Answered: Capillary rise in the glass tube used…

Name: Capillary rise in the glass tube used for measuring water level isnot
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: Capillary rise in the glass tube used for measuring water level isnot to exceed 0.5 mm. Determine its minimum size, given thatsurface tension for water in contact with air = 0.07112 N/m.

Engineering

Mechanical Engineering

Capillary rise in the glass tube used for measuring water level is not to exceed 0.5 mm. Determine its minimum size, given that surface tension for water in contact with air = 0.07112 N/m.

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.122P: The 12-ft wide quarter-circular gate AB is hinged at A. Determine the contact force between the gate...

See similar textbooks

Similar questions

One side of the container has a 03-m square door that is hinged at its top edge. If the container is filled with water, determine the smallest force F that must be applied to the bottom edge of the door to keep it closed.
he gage pressure of the air in the tank shown in the figure is measured to be 65 kPa. Determine the differential height h of the mercury column.
What force, F, must be applied to the S-shaped gate to keep it closed? The gate is 1 m wide andthe radius of curvature of each part is 1 m. The liquid is water.
Determine the pressure at a point 10 m below the free surface in a fluid that has a variable density in kilograms per cubic meter given the density equal to 450+ ah, in which a = 12kg/m^4 and h is the distance in meter measured from the free surface.
To what height will 68˚F ethyl alcohol rise in a 0.005 in internal diameter glass capillary tube? The density of the alcohol is 49 lbm/ft3 note ? = 0.00156 ???/ ?? and ? = 0°.
A tank of water 4 m deep receives a constant upwardacceleration a z . Determine ( a ) the gage pressure at the tankbottom if a z = 5 m 2 /s and ( b ) the value of a z that causes thegage pressure at the tank bottom to be 1 atm.
Derive a formula for capillary rise (h) between two concentric glass tubes of radiuses RI and R2. determine its value for water if (G. = 0.072 N/m, RI=30mm, & R2=36mm) (Take smooth and very clean glass tubes).
Determine the capillary rise of kerosene at 68°F IN INCHES in a glass tube having a diameter of 0.25 inches From given: Density of kerosene at 68°F =1.57 slugs/ft^3 Surface tension of kerosene at 68°F =0.0017 lb/ft
The absolute pressure of air in the tank is 70 kPa. If the barometricpressure is 755 mm Hg determine the gage reading connected to a tank inexpressed in kPa and meters of water.
1. A rectangular plane surface is 2m wide and 3m deep. It lies in a vertical plane inthe water. Determine the total pressure and position of the center of pressure on theplane surface when its upper edge is horizontal (a)coincides with watersurface and (b) 2.5m below the free water surface
Express the hydrostatic against the rectangular plate as an integral if it is submerge in water. State the integration limit for work. Measurements; Outside height;20ft Inside Height;12ft Length;4ft Distance between two shapes;3ft
A 0.018-in-diameter glass tube is inserted into mercury, which makes a contact angle of 140° with glass. Determine the capillary drop of mercury in the tube at 68°F.