The device shown in figure below can be analyzed as a pin-jointed fourbar mechanism in series with a slider-crank mechanism. At the instant shown, the crank OC makes an angle 45" with the horizontal axis; Draw the vector loop of the two mechanisms separately Determine the position of the slider D with respect to A. OC 150 mm, AB = 200 mm, BC 300 mm, BD = 450 mm. 90 mm B 300 mm

The device shown in figure below can be analyzed as a pin-jointed fourbar mechanism in series with a slider-crank mechanism. At the instant shown, the crank OC makes an angle 45" with the horizontal axis; Draw the vector loop of the two mechanisms separately Determine the position of the slider D with respect to A. OC 150 mm, AB = 200 mm, BC 300 mm, BD = 450 mm. 90 mm B 300 mm

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In a swiveling joint mechanism, as shown in figure below, the driving crank OA is rotating clockwise at 200 r.p.m. The lengths of various links are: OA - 50mm; AB = 350 mm; AD = DB; DE = EF = 250 mm and CB - 125 mm. The horizontal distance between the fixed points and C is 300 mm and the vertical distance between F and C is 250 mm. For the given configuration, determine: 1- Velocity of the slider block F 2. Angular velocity of the link DE. And 3. Velocity of sliding of the link DE in the swivel block
At a given moment four link mechanism OABO1, is in the position shown on the figure and OA=AB=AO1=3√ 2 m.Link OA rotates at constant angular velocity ω1= 5 s−1.Find the angular velocity ω3 and angular acceleration α3 of link O1B.
For the four-bar- linkage shown in the following figure. BC=68mm, CD=100mm, AD=120mm. Determine the range of AB to make it a crank-rocker mechanism.
For the slider-crank mechanism shown in the following figure, link 1 rotates counterclockwise. AB=10mm, BC=30mm, e=10mm. Calculate the maximal pressure angle αmax.
A general pinjointed fourbar linkage is shown in the figure below. It has the followings: The link lengths are L1 = 8.50 in., L2 = 3.00 in., L3 = 5.00 in. and L4 = 4.50 in. The values of θ1 = 0, θ2 = 60°, and θ4 = 119°. The angular velocity of link2 ω2 = 10 rad/s CCW. The angular velocities of link 3 ω3 and and link 4 ω4 are: Select one: a. ω3 = 5.29 rad/s CW, ω4 = 4.80 rad/s CCW b. ω3 = 5.29rad/s CW, ω4 = 6.14 rad/s CW c. ω3 = 3.94 rad/s CCW, ω4 = 4.8 rad/s CCW d. ω3 = 3.94 rad/s CCW, ω4 = 6.14 rad/s CCW
A general pinjointed fourbar linkage is shown in the figure below. It has the followings: The link lengths are L1 = 8.50 in., L2 = 3.00 in., L3 = 5.00 in. and L4 = 4.50 in. The values of e1 = 0, 02 = 60°, and 04 = 119°. The angular velocity of link2 w2 = 10 rad/s CCW. L4 2 = 60° Ao B. O, = 0° Figure 5.32 Problems 5.3 and 5.4 The angular velocities of link 3 wz and and link 4 wa are: Select one: O a. w3 = 5.29rad/s CW, w4 = 6.14 rad/s CW O b. w3 = 3.94 rad/s CCW, W4 = 4.8 rad/s CCW O c. W3 = 3.94 rad/s CCW, wa = 6.14 rad/s CCW %3D O d. w3 = 5.29 rad/s CW, w4 = 4.80 rad/s CCW %3D %3D
Question 3: Mechanisms [16]The lengths of various links of a mechanism, as shown in Figure 2, are:OA = 0.3 m; AB = 1 m; CD = 0.8 m; and AC = CB. SKETCH BELOW 3.1. Draw the displacemt diagram to a scale. 3.2. Determine the velocity of piston B if the crank OA rotates at 160 r.p.m in theclockwise direction.3.3. Calculate the velocity of point C.
A crank-rocker mechanism is to be used to drive a ratchet mechanism. Using mathematics and specific illustrations, find the required coupler length in inches required to generate this motion. The swing of the rocker is 35.0 from the vertical position in each direction. (Note: O2 is the crank pivot; O4 is the rocker pivot; C is the coupler-rocker joint; B is the coupler-crank joint). O2O4: 4.1 in.; lies in the horizontal plane O4C: 4.8 in.; mid stroke is vertical
An inside cylinder locomotive has its cylinder centre lines 1 m apart and has a stroke of 1 m. The rotating masses per cylinder are equivalent to 100 kg at the crank pin, and the reciprocating masses per cylinder to 200 kg. The wheel centre lines are 2 m apart. The cranks are at right angles. The whole of the rotating and 2/3 of the reciprocating masses are to be balanced by masses placed at a radius of 0.8 m. Find the magnitude of the balancing mass on the right most wheel. Select one: A. 55.32 kg B. 322.3 kg C. 225.3 kg D. 115.3 kg
a. Sketch the kinematic diagram of the following mechanism shown and give brief description on how each link move relative to each other. Compute the degree of freedom.b. Determine the location of all revolute pairs shown in the figure as the tip of the loadermoves from L to L’.
find the equations of motion using the lagrange equations of motion. Point A and C are moving vertically, points D and B are moving horizontally. the unloaded spring has length equal to l*sqrt(2). Each rod has mass m amd length l, spring constant is equal to k
The system shown in the figure is composed of bar AB which is pin-supported at A and attached to bar BC. The end of bar BC is connected to the slider block C. At the instant shown, the acceleration of point B is 1.125 m/s2 downward and the angular velocity of bar BC is 0.5625 rad/s counterclockwise. Which vector equation relates the accelerations of points B and C ?