The effective surface temperature of the coil is 5°C. The surface area of the coil is such as would give 4.6 TR with the given entering air state of 40 m3/min of a mixture of recirculated room air and outdoor air enters cooling coil at 27°C dry bulb temperature and 15°C wet bulb temperature.. Determine the conditions of the air leaving the coil and the by-pass factor.

The effective surface temperature of the coil is 5°C. The surface area of the coil is such as would give 4.6 TR with the given entering air state of 40 m3/min of a mixture of recirculated room air and outdoor air enters cooling coil at 27°C dry bulb temperature and 15°C wet bulb temperature.. Determine the conditions of the air leaving the coil and the by-pass factor.

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter6: Forced Convection Over Exterior Surfaces

Section: Chapter Questions

Problem 6.24P

See similar textbooks

Similar questions

Determine the airflow through a furnace that is producing 60,000 btu/h of heat when the return air temperature is 72 degrees and the supply air temperature is 130 degrees
Consider that a flow of air with a velocity of 270 m/s enters an adiabatic diffuser at a pressure of 60 kPa and a temperature of 7°C and exits the diffuser at a pressure of 85 kPa and a temperature of 27°C. Use variable specific heat approach to indicate the air properties. Calculate the ratio of the inlet area to the exit area of the nozzle.
Is the sonic velocity in a specified medium a fixed quantity, or does it change as the properties of the medium change? Explain
A stationary temperature probe inserted into a duct where air is flowing at 190 m/s reads 85°C. What is the actual temperature of the air?
Air at a dry ball temperature of 9m5 ° and rh 4% is passed over the cooling coil so that the temperature of the dry ball of air becomes 50 ° C. How much heat is released from the air in the process
air is compressed polytropically from 101kPa and 23 Celsius and delivered to a tank at 1500 kPa and 175 celcius. determine the heat remove in Kj/Kg.
Steam at 500 kPa and a quality of 90 percent occupied a rigid vessel of volume 0.3m'. Calculate the mass, internal energy, and enthalpy of the steam.
In the summer, when the air motion is increased body heat loss is also increased. True or false ?
The sensible and latent heat losses from a space are 22 kW and 9.5 kW respectively. The space is maintained at 21°C db-temperature and 7°C dew-point temperature. Conditioned air is supplied to the space at 35°C db-temperature. The pressure is constant at 101.3 kPa. Determine:the wb-temperature of the supply air in °Cthe mass flow rate of air in kg/s
Calculate the final pressure and temperature inside the cylindrical tank for air at 20˚C and 200 kPaa that was compressed to a quarter of its volume under isentropic process (k = 1.4).
For a fixed compressor inlet velocity and flow area, explain the effect of increasing compressor inlet temperature (i.e., summertime operation versus wintertime operation) on the inlet mass flow rate and the net power output with all other parameters of the problem being the same.
How is the Reynolds number related to Darcy-Weisbach?