What is the maximum compressive force? The femur bone in a human leg has a minimum effective cross section of 3.15 cm². How much compressive force can itwithstand before breaking? Assume the ultimate strength of the bone to be 1.70 × 10% N/m².maximum compressive force:

The pressure presently working on an object can be defined as the physical force that is being…

The femur bone in a human leg has a minimum effective cross section of 3.15 cm2. How much compressive force can it withstand before breaking? Assume the ultimate strength of the bone to be 1.70 x 10% N/m². maximum compressive force:

The femur bone in a human leg has a minimum effective cross section of 3.15 cm2. How much compressive force can it withstand before breaking? Assume the ultimate strength of the bone to be 1.70 x 10% N/m². maximum compressive force:

Physics for Scientists and Engineers, Technology Update (No access codes included)

9th Edition

ISBN:9781305116399

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter12: Static Equilibrium And Elasticity

Section: Chapter Questions

Problem 12.28P: Assume Youngs modulus for bone is 1.50 1010 N/m2. The bone breaks if stress greater than 1.50 108...

See similar textbooks

Related questions

Q: By what amount does the nylon stretch?

Q: A lift of mass 1400 kg is suspended by a steel cable. The lift can move upwards at a maximum…

A: Solution

Q: "One end of a steel rod of radius R = 10mm and length L = 80 cm is held in a vise. A force of…

Q: The wooden sign is supported by three chains attached to the ceiling (AC, AB & AD) If the tension in…

A: According to guidelines we are suppose to do only three part from multipart questions. Kindly repost…

Q: Assume a person's mass is 54.0 kg and each of her shoes has an area of 195 cm². F on her feet if her…

Q: Tweedledum and Tweedledee are carrying a uniform wooden board that is L = 3.00 m long and has a…

A: W = 160N L = 3 m F1 = 60 N

Q: A circular rod of cross-sectional area 2 x 10m² has a tensile force of 80 kN applied to it. The…

Q: What is the compressive stress F/A on a woman's feet, in units of kilopascals (kPa) , if the woman's…

A: Given Data: The mass of a woman is, m=52.0 kg The area of each shoe is, A=185.0 cm2 The effective…

Q: Assume Young's modulus for bone is 1.50 x 1010 N/m2. The bone breaks if stress greater than a= 15086…

A: Given, Young's modulus = Stress = Radius = 0.01 m

Q: A metal slab of side (74+ 75) cm and thickness (74 + 25) cm is subjected to a tangential force of…

Q: A wire of uniform cross sectional area of 0.45 mm is stretched at both ends by a total force of 7O N…

A: Given: Area of cross section of wire is 0.45 mm2. Force acting on the wire is 70 N. Strain produced…

Q: Two solid cylindrical rods (1) and (2) are joined together at flange B and loaded, as shown. If the…

A: To find minimum diameter for each rod use the formula of normal stress and put the values to solve .…

Q: An aluminum (ρ = 2.7 g/cm3) wire is suspended from the ceiling and hangs vertically. How long must…

Q: Is thrée times larger than in steel shaft. QI1) For the section shown aside, if the bending stress…

Q: A 557-N force is applied to stretch a cable, 66-m long and has a cross-sectional area of 2.8 mm^2.…

A: Given F=557 N L=66m A=2.8 mm2 Y=1.0x10^11 N/m2

Q: What is the force required to a steel wire to double its length when its area of cross-section is…

A: In the question it is given that ,Young's Modulus Y=200GPa=200×106Pa=2×104N/m2length of the wire…

Q: Two cylindrical rods, one steel (Y = 2.00×10" Pa) and the other copper (Y = 1.10×10" Pa), are joined…

A: SOlution: Given that Steel, Y = 2x1011 Pa copper, Y = 1.1x1011 Pa Steel, L =1.3 m Copper ,L =2.6 m…

Q: Steel beams are used for load bearing supports in a building. Each beam is 4.0 m long with a…

A: Length , L = 4 m Cross sectional area , A = 9.3 x 10-3 m2 Load , F = 7.5 x 104 N Young's modulus ,…

Q: One end of a uniform rod of weight w = 73.5 N and length L = 2.55 m is supported by a cable at an…

A: Given Data : The weight of the rod is given as w = 73.5N. The length of the rod is given as L =…

Q: 1.4 Axial loads are applied to the compound rod that is composed of an aluminum segment rigidly…

A: P= 10 kN = 10 * 103 N AAl= 600 mm2 ABr= 400 mm2 ASteel= 300 mm2

Q: Assume Young's modulus for bone is 1.50 x 1010 N/m2. The bone breaks if stress greater than o= 45844…

A: Young's modulus is Y= 1.5×10¹⁰ N/m² Maximum stress is σ = 45844 N/m² Effective radius of the bone…

Q: When using a pencil eraser, you exert a downward force of 5.5 N at a distance of 1.9 cm from the…

Q: Steel beams are used for load bearing supports in a building. Each beam is 4.0 m long with a…

A: Given: Length of each beam, L=4 m Area of cross-section,A=7.5×10-3 m2 Load, W=4.5×104 N Young's…

Q: One end of a uniform e = 4.00m long rod of weight w is supported by a cable at an angle of 0 = 35°…

Q: The upper surface of a cube of gelatin, 5.0 cm on a side, is displaced by 0.64 cm by a tangential…

Q: Assume Young's modulus of a femure bone of an effective diameter 2.5 cm is 1.5 x1010 N/m2. The bone…

A: Given: A femur bone of an effective diameter 2.5 cm and it's Young's modulus = 1.5 × 1010 N/m2.…

Q: A steel wire of length 2.10 m with circular cross section must stretch no more than 0.300 cm when a…

Q: Consider two steel rods, A and B. B has three times the area and twice the length of A, so Young's…

A: We know that Young's modulus is property of matter and not depend on size . Here, both rods are made…

Q: An elevator of mass of 1200kg is hanged by steel wire with a cross sectional area 1.2*10-4 m2…

Q: A vertical steel girder with a crosssectional area of 0.15 m2 has a 1550 kg sign hanging from its…

A: Given: Area of cross section A of the steel girder is 0.15 m2. Mass M hanging at the end is of 1550…

Q: A mass of 3000 kg hangs at the end of a steel rod 5.0 meters in length. The area of the cross…

A: Given Data: The mass of a steel rod is, m=3000 kg The actual length of a rod is, l=5 m The…

Q: A 115 m long steel cable with a cross-sectional area of 1.13 x 10-4 m2 is subjected to a tensile…

A: Given- Length L= 115 m Cross-sectional area A= 1.13 x 10-4 m2 Tensile force F= 565 N

Q: A circular steel wire 2.4m long must stretch no more than 0.24cm when a tensile force of 420 N is…

Q: "One end of a steel rod of radius R = 10mm and length L = 100 cm is held in a vise. A force of…

Q: Assume Young's modulus for bone is 1.50 x 1010 N/m2. The bone breaks if stress greater than 0= 62780…

A: Young's modulus for the bone, Breaking stress, Effective radius of the bone,

Q: Q2.8/ If the tensile stresses generated in a copper rod after the influence of external forces (ot…

A: Given data: The tensile stress in the material is σt=2158.2104 N/m2. The longitudinal strain is…

Q: steel wire of length 1.93 m with a circular cross-section must stretch no more than 0.240 cm when a…

A: Dear student The Young modulus is defined as: Y = Stress/ Strain Here stress = Force / Area Strain =…

Q: Assume a person's mass is 62.0 kg and each of her shoes has an area of 220 cm?. F What is the…

Q: 4-A cylindrical steel specimen is subjected to a stress of (100 Mpa). If the axial strain ( E. ) is…

Q: A steel wire having a radius of 2.0 mm, carrying a load of 4 kg, is hanging from a ceiling. Given…

Q: Assume Young's modulus for bone is 1.50 x 1010 N/m2. The bone breaks if stress greater than o= 81962…

A: To determine: The maximum force that is exterted on the femur bone

Q: What is the compressive stress ?/?F/A on a woman's feet, in units of kilopascals (kPa)(kPa) , if the…

A: mass = 66 kg weight = 66 * 9.8 = 646.8 N weight on each foot = 646.8/2 = 323.4 N Area of each shoe…

Q: Young's modulus of iron rod is 21 × 1010 N/m². A force of 7.0 x 105 N is applied to a 1.5-m length…

A: Force applied, F = 7x105 N Length of iron rod, l = 1.5 m Cross sectional area of iron, a = 0.25 m2…

Q: Calculate the Young's modulus for the given wire when a load of 2000 N is hung from the wire? The…

A: The Young's modulus is given by Y = F LA l where, F is the force, L is the original length, A is…

Q: Find the elongation of a steel rod of 100 mm long when it is subjected to a tensile strain of 0.004?…

A: (b) 0.4 mm

Q: Three plates, secured by a 60 mm bolt, are being pulled at opposite directions alternately. What…

A: Diameter of the bolt, D=60 mmRadius of the bolt, R=30 mm=30×10-3 mStress, P=175 MPa

Concept explainers

Mechanical Properties of Solids

There are three types of matter- solid, liquid and gas. Out of them, solids have a rigid shaped and size. The intermolecular forces of attractions in solids are greatest. Mechanical properties are the physical properties of a material which it shows, when it is provided with certain amount of force or load. These properties are to be kept in mind for various purposes. When a force is applied to an object, the object may or may not get deformed depending upon its elastic property. But every time the object develops a restoring force against the force applied. This is commonly known as stress. If the object changes its dimensions due to the force applied it develops strain ( which is the ratio of change in dimension to the original dimension).

Question

100%

What is the maximum compressive force?

The femur bone in a human leg has a minimum effective cross section of 3.15 cm². How much compressive force can it
withstand before breaking? Assume the ultimate strength of the bone to be 1.70 × 10% N/m².
maximum compressive force:

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step 3

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 3 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

A uniform wire (Y = 2.0 1011 N/m2) is subjected to a longitudinal tensile stress of 4.0 107 N/m2. What is the fractional change in the length of the wire?
Alarge uniform cylindrical steel rod of density =7.8g/cm3 is 2.0 m long and has a diameter of 5.0 cm. the rod is fastened to a concrete floor with its long axis vertical.what is the normal stress in the rod at the cross-section located at (a)1.0 mfrom its lower end?(b)1.5 m from the lower end?
A steel cable 2.00 m in length and with cross-sectional radius 0.350 mm is used to suspend from the ceiling a 10.0-kg model aircraft that is flying in a horizontal circle with an angular speed of 6.00 rad/s. What is the strain produced in the cable?
Review the relationship between stress and strain. Can you find any similarities between the two quantities?
Two rods, one made of copper and the other of steel, have the same dimensions. If the copper rod stretches by 0.15mm under some stress, how much does the steel rod stretch under the same stress?
Can Young’s modulus have a negative value? What about the bulk modulus?
A 100-N weight is attached to a free end of a metallic wire that hangs from the ceiling. When a second 100-N weight is added to the wire, it stretches 3.0 mm. The diameter and the length of the wire are 1.0 mm and2.0 m, respectively. What is Young’s modulus of the metal used to manufacture the wire?
A brass wire and a steel wire, both of the same length, are extended by 1.0 mm under the same force. Is the cross-sectional radius of the brass wire more, less, or equal to the cross-sectional radius of the steel wire? Explain. Youngs moduli for brass and steel are 1.0 1010 N/m2 and 2.0 1011 N/m2, respectively.
What Is Static Equilibrium? Problems 13 are grouped. 1. C A ball is attached to a strong, lightweight rod (Fig. P14.1). The rod is supported by a horizontal pin near the top. The ball is at rest. Is the ball in static equilibrium? If not, why not? If so, which type of equilibrium is itstable, unstable, or neutral? Hint: What would happen if you displaced the ball slightly? FIGURE P14.1
Two thin rods, one made of steel and the other of aluminium, are joined end to end. Each rod is 2.0m long and has cross-sectional area 9.1mm2 . If a 10,000N tensile force is applied at each end of the combination, find: (a) stress in each rod; (b) strain in each rod; and, (c) elongation of each rod.
Problems 33 and 34 are paired. One end of a uniform beam that weighs 2.80 102 N is attached to a wall with a hinge pin. The other end is supported by a cable making the angles shown in Figure P14.33. Find the tension in the cable. FIGURE P14.33 Problems 33 and 34.
A wooden door 2.1 m high and 0.90 m wide is hung by two hinges 1.8 m apart. The lower hinge is 15 cm above the bottom of the door. The center of mass of the door is at its geometric center, and the weight of the door is 260 N, which is supported equally by both hinges. Find the horizontal force exerted by each hinge on the door.