The FM radio band is broadcast between 88.0 MHz and 108 MHz.What is the maximum capacitance that must be used to tune in these signals if an inductor of 3.10 µH is used?pF The FM radio band is broadcast between 88.0 MHz and 108 MHz.What is the minimum capacitance that must be used to tune in these signals if an inductor of 3.10 uH is used?pF

Frequency for the LCR circuit is given by the formula: f =12πLCwhere f is the frequency of the…

Answered: The FM radio band is broadcast between…

The FM radio band is broadcast between 88.0 MHz and 108 MHz. What is the maximum capacitance that must be used to tune in these signals if an inductor of 3.10 µH is used? pF

Physics for Scientists and Engineers

10th Edition

ISBN:9781337553278

Author:Raymond A. Serway, John W. Jewett

Publisher:Raymond A. Serway, John W. Jewett

Chapter32: Alternating-current Circuits

Section: Chapter Questions

Problem 25P: The LC circuit of a radar transmitter oscillates at 9.00 GHz. (a) What inductance is required for...

See similar textbooks

Similar questions

The lowest frequency in the FM radio band is 88.0 MHz. (a) What inductance is needed to produce this resonant frequency if it is connected to a 2.50 pF capacitor? (b) The capacitor is variable, to allow the resonant frequency to be adjusted to as high as 108 MHz. What must the capacitance be at this frequency?
Unreasonable Results An LC circuit containing a 2.00-H inductor oscillates at such a frequency that it radiates at a 1.00m wavelength. (a) What is the capacitance of the circuit? (b) What is unreasonable about this result? (c) Which assumptions are unreasonable or inconsistent?
(a) An inductor designed to filter high-frequency noise from power supplied to a personal computer is placed in series with the computer. What minimum inductance should it have to produce a 2.00 k(reactance for 15.0 kHz noise? (b) What is its reactance at 60.0 Hz?
(a) Does the phase angle in an RLC series circuit depend on frequency? (b) What is the phase angle for the circuit when the inductive reactance equals the capacitive reactance?
An LC circuit in an AM tuner (in a car stereo) uses a coil with an inductance of 2.5 mH and a variable capacitor. If the natural frequency of the circuit is to be adjustable over the range 540 to 1600 kHz (the AM broadcast band), that range of capacitance is required?
An RLC series circuit has an impedance of 60 and a power factor of 0.50, with the voltage Lagging the current (a) Should a capacitor or an inductor be placed in series with the elements to raise the power factor of the circuit? (b) What is the value of the capacitance or self-inductance that will raise the power factor to unity?
Unreasonable Results An LC circuit containing a 1.00-pF capacitor oscillates at such a frequency mat it radiates at a 300-nm wavelength. (a) What is the inductance of the circuit? (b) What is unreasonable about this result? (c) Which assumptions are unreasonable or inconsistent?
Review. A radar transmitter contains an LC circuit oscillating at 1.00 1010 Hz. (a) For a one-turn loop having an inductance of 400 pH to resonate at this frequency, what capacitance is required in series with the loop? (b) The capacitor has square, parallel plates separated by 1.00 mm of air. What should the edge length of the plates be? (c) What is the common reactance of the loop and capacitor at resonance?
A 7.0-mH induct is connected across a 60-Hz ac source whose voltage amplitude is 50 V. (a) What is the maximum current through the inductor? (b) What is the phase relationship between the current through and the potential difference across the inductor?
The LC circuit of a radar transmitter oscillates at 9.00 GHz. (a) What inductance is required for the circuit to resonate at this frequency if its capacitance is 2.00 pF? (b) What is the inductive reactance of the circuit at this frequency?
A 60.0-ft resistor is connected in series with a 30.0-F capacitor and a source whose maximum voltage is 120 V, operating at 60.0 Hz. Find (a) the capacitive reactance of the circuit, (b) the impedance of the circuit, and (c) the maximum current in the circuit. (d) Does the voltage lead or lag the current? (e) How will adding an inductor in series with the existing resistor and capacitor affect the current? Explain.
An PLC series circuit with R=600 , L = 30 mH. and c=0.050F is driven by an ac source whose frequency and voltage amplitude are 500 Hz and 50 V, respectively, (a) What is the impedance of the circuit? (b) What is the amplitude of the current in the circuit? (c) What is the phase angle between the emf of the source and the current?