The gas mixture formed as a result of the combustion of the stoichiometric mixture consisting of methane (CH4) and humid air reaches a temperature of 1500 K and a pressure of 80 bar. In this case, calculate the specific entropy value of the products on a molar and mass basis. Take the specific humidity of the humid air as 0.01 kg sb/kg Hk.

The gas mixture formed as a result of the combustion of the stoichiometric mixture consisting of methane (CH4) and humid air reaches a temperature of 1500 K and a pressure of 80 bar. In this case, calculate the specific entropy value of the products on a molar and mass basis. Take the specific humidity of the humid air as 0.01 kg sb/kg Hk.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Determine the entropy change of 1.5 moles of ammonia that is heated from 180°C to 750°C. The system operates at an atmospheric pressure on a steady flow process.
Steam (H2O) enters a turbine at 35 m/s and specific enthalpy of 3500 kJ/kg. Thesteam leaves the turbine as a mixture of vapor and liquid having a velocity of 60m/s and a specific enthalpy of 2400 kJ/kg. If the flow through the turbine is steady,adiabatic, and changes in elevation are negligible, calculate the work output per unitmass (kJ/kg) for the turbine.
Identify if the property of the following steam: Pressure Specific Enthalpy Specific Entropy MPa kJ/kg kJ/kg-K 13 2483 ?
Refrigerant 134a (R134a) is at vapor/liquid equilibrium at 300 K. The saturation pressure is 7.0282 bar, the entropy of the saturated liquid is 1.1287 J/(g K) and the entropy of the saturated vapor is 1.7156 J/(g K). If the system has a an entropy of 1.38 J/(g K), what is the quality? (That is, what fraction of the system is vapor?) Report your answer to three decimal places.
Ethane (C2H6) at 20oC and 200kPa and methane (CH4) at 45oC and 200kPa enter an adiabatic mixing chamber. The mass flow rate of ethane is 9kg/s which is twice the mass flow rate of methane .Determine the mixture temperature and pressure. Take the specific heats of C2H6=1.7662kJ/kg K, CH4=2.2537kJ/kg K.
Liquid octane is burned steadily with air in a jet engine. If the air–fuel ratio is 18 kg air/kg fuel, determine the percentage of excess air used during this process.
Entropy of the mixture?
Air is compressed in a piston-cylinder assembly. Initially, the pressure and temperature of the air are 150 kPa and 47 oC, and in the final state, the pressure is 900 kPa and the temperature is 207 oC. During this process, the entropy change of the air; a) using the property values in the weather table b) calculate using average specific heats. (cp mean=1.0354 kJ/ kgK) Rules • All units should be written in all question solutions, • Unit conversions should be displayed, • When determining the phase: it should be written which table was used, why that table was chosen, and how the phase was decided according to the values obtained from the tables. • The reason for each acceptance made in the solution should be written.
(a) In reaching equilibrium, how much heat transfer occurs from 1.00 kg of water at 40.0º C when it is placed in contact with 1.00 kg of 20.0º C water in reaching equilibrium? (b) What is the change in entropy due to this heat transfer? (c) How much work is made unavailable, taking the lowest temperature to be 20.0º C ? Explicitly show how you follow the steps in the Problem-Solving Strategies for Entropy.
A mixture of gases contains 30% N2, 60% O2, and 10 % CO2 on a mass basics. Mixture pressure and temperature are 340 kPa ( gage ) and 36.85 C. Considering the mixture as a diatomic ideal gas determine: A) the heat required when the mixture is heated in a 25-m^3 rigid adiabatic tank to 620 K; B) the heat rate required when the mixture flows steadily at 21.0 kg/s through a heat exchanger until its absolute temperature is doubled
Using the steam tables, determine the specific enthalpy, specific volume and specific enthalpy for steam at 2800 KPa and at a temperature of 390 C.c. The steam in the question above is compressed at a constant enthalpy to a pressure of 4700 KPa. What is the final temperature, specific enthalpy, specific volume and specific entropy of the steam in this new state?d. What is the change in specific enthalpy, specific volume, temperature and specificentropy?
Using the steam tables, calculate the specific volume, internal energy, enthalpy, and entropy of H2O at 250oC with 25% moisture content.