Problem 2:The information in an analog signal voltage waveform is to be transmitted over a PCMsystem with an accuracy of ± 0.1 % of the peak-to-peak analog signal. The analogvoltage waveform has a bandwidth of 100 Hz and an amplitude range of – 10 to + 10Volts.Determine the minimum sampling rate required.b. Determine the number of bits in each PCM word.c. Determine the minimum bit rate required in the PCM system.d. Determine the minimum absolute channel bandwidth required for the transmission of thePCM signal.

Given that, fm=100Hz Accuracy=0.1% Vin=[-10,10] a) As, fs,min=2fm=2*100=200 Hz Minimum sampling…

The information in an analog signal voltage waveform is to be transmitted over a PCM system with an accuracy of ± 0.1 % of the peak-to-peak analog signal. The analog voltage waveform has a bandwidth of 100 Hz and an amplitude range of – 10 to + 10 Volts. a. Determine the minimum sampling rate required. b. Determine the number of bits in each PCM word. c. Determine the minimum bit rate required in the PCM system. d. Determine the minimum absolute channel bandwidth required for the transmission of the PCM signal.

The information in an analog signal voltage waveform is to be transmitted over a PCM system with an accuracy of ± 0.1 % of the peak-to-peak analog signal. The analog voltage waveform has a bandwidth of 100 Hz and an amplitude range of – 10 to + 10 Volts. a. Determine the minimum sampling rate required. b. Determine the number of bits in each PCM word. c. Determine the minimum bit rate required in the PCM system. d. Determine the minimum absolute channel bandwidth required for the transmission of the PCM signal.

Delmar's Standard Textbook Of Electricity

7th Edition

ISBN:9781337900348

Author:Stephen L. Herman

Publisher:Stephen L. Herman

ChapterS: Safety, Basic Electricity And Ohm's Law

Section: Chapter Questions

Problem 8RQ: What is an MSDS?

See similar textbooks

Similar questions

1/ A 4 MHz analog signal is to be converted to a binary signal (PCM). If the signal to peak quantization noise ratio should be at least 30 dB: a/ What is the size of the code word? b/ What is the system rate in bits per second if sampled at the Nyquist rate?
The number of bits per sample in a PCM system has SNqR=45 dB is?
In the figure below, an x(t) signal varying between +- 1.6 V is split into 8 quanta levels and converted to a digital signal. being converted. a) Calculate the quantization gap voltage (step)? b) Draw the PAM, PCM and ASK outputs in this conversion process? c) Calculate bit transmission rate if sampling pulse frequency ?? = 2kHz.
An analog signal having a maximum frequency of 10 kHz is being transmitted through a PCM system with a uniform quantizer having 256 levels. What will be the minimum transmission bandwidth of the transmitted PCM signal?
3/ A Digital Analog Converter of 12 Bits of Precision is available A/ Determine the signal to the system's peak noise ratio B/ If the signal is sampled at 44 kHz. What is the bits rate generated by the system? C/ Determine the required bandwidth if I wanted to transmit this data with a modulator 16-QAM.
Discuss the major differences between analog and digital data acquisition. How do the number of bits in the ADC register and the dwell time affect the results? How are quantization errors minimized? What is a signal/noise ratio? How can SNR be optimized?
Qَ\ discuss a conversion of an analogue signal to digital bits Please I need to resolve the question quickly
What will be the minimum transmission bandwidth of a PCM system if the number of bits per sample is 8 and the maximum frequency of the analog signal is 4.5 kHz?
Discuss how the original signal can be recovered perfectly from the output of the decoder. What are the advantages of PCM system over the other types of modulation systems?
the question is "if we need to send an ECG data. determine a minimum and maximum data rate require to send this data". is the solution related to PCM(pulse coded modulation? explain in details please.
An a differential pulse code modulated system, the transmitted bits per sample is 7. How many levels are present in the quantizer?
For a CD audio system, the analog signal is digitized such that the signal to quantization ratio is maintained at least 96dB. The sampling is performed at 44100Hz. a) What is the minimum number of quantization levels required to attain the given signal to quantization noise ratio?b) How many bits per sample are required when levels are identified in part a)?c) Identify the data rate in bits/s for the system.