The inside design conditions for a conditioned space are 20.1°C dry-bulb and 15.2°C wet-bulb. The air temperature increases 10.6°C as it passes through the conditioned space. The apparatus dew point is 11.9°C. The heat transfer rate is 456 Kw. What is most nearly the volumetric flow rate of the air passing through the space?

The inside design conditions for a conditioned space are 20.1°C dry-bulb and 15.2°C wet-bulb. The air temperature increases 10.6°C as it passes through the conditioned space. The apparatus dew point is 11.9°C. The heat transfer rate is 456 Kw. What is most nearly the volumetric flow rate of the air passing through the space?

Refrigeration and Air Conditioning Technology (MindTap Course List)

8th Edition

ISBN:9781305578296

Author:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Publisher:John Tomczyk, Eugene Silberstein, Bill Whitman, Bill Johnson

Chapter44: Geothermal Heat Pumps

Section: Chapter Questions

Problem 12RQ: The function of the pressure tank in an open-loop, geo-thermal heat pump well system is to prevent...

See similar textbooks

Similar questions

Air at 24 °C dry-bulg and 15 °C wet-bulb enters a humidifier and leaves at 41 °C dry-bulb and 21 °C wet-bulb. How much moisture has been added per kilogram of dry air?
Example design a winter air conditioning power plant for a neighborhood of your choice (preheater/final heater andMust be humidification cells). Audible heat loss of the neighborhood is 50 kW, hidden heat gain is 20 kWhave been calculated. 1-) Show the process in the psychrometric diagram. 2-) Calculate the total amount of air circulating in the system 3-) Calculate the amount of water sprayed into the air in the humidifier 4-) Calculate the preheater capacity. 5-) Calculate final heater capacity
Pls. Answer thank you! The evaporative condenser of an ammonia refrigeration plant has a water flow rate of 100 kg/s and enters a natural draft cooling tower at 43 °C. The water is cooled to 30 °C by air entering at 27 oC db 24 °C wet bulb. The air leaves the tower as 90% RH and 32 °C db. Calculate the percent of make-up water needed the tower. At 27 °C db and 24 °C wb: h = 72.5 KJ/kg, w = 0.0178 At 90% RH and 32 °C db: h = 102 KJ/kg, w = 0.0275
Engineer CoolAir is working on designing an air conditioning unit that handles the combined air flow from two food processing rooms with the following quantities: 4000 ft^3/ min at 80° F wet bulb and 50% saturated; 3000 ft^3/min at 70° F dry bulb and 65°F wet bulb temperatures. (a) What is the total mass flow rate? (b) What is the dry bulb temperature? (c) what is the wet bulb temperature?
Hi please show working? Thankyou ! An air conditioner cools humid air Temperature 1 =25 celcius Temperature 2 = 10 celcius Relative humidity 1 = 70% Determine the final relative humidity (2) and calculate: 1) the energy removed 2) the water mass extracted from the air
A heating system that uses hot air has a total heating load of 509 thousand btuh. How much hot air flow in CFM is required to satisfy the total load if the temperature difference is 23?
In a place where a summer air-conditioning plant will be installed, 40% of the air entering the air-conditioning plant is the fresh air, and 60% is the return (bypass) air. The sensible heat gain of the place is 10 kW. and the latent heat gain is 2.5 kW.> Outdoor conditions: 32 °C DB, %50 RH.> Indoor conditions: 20 °C DB. %50 RH.> Take the relative humidity of the air passing through the cooling coil 90% at the coil outlet. > The total air flow rate in the mixing chamber is 3000 m3/h> Take the density of the air as 1.2 kg/m3Based on the above.a) Show the process on a psychrometric diagram. b) Calculate the amount of fresh air. c) What is the value of enthalpy of blowing air. d) Calculate the ratio of by-pass air at cooling coil. e) Calculate the flow rate of by-passed air.
In a place where a summer air-conditioning plant will be installed, 40% of the air entering the air-conditioning plant is the fresh air, and 60% is the return (bypass) air. The sensible heat gain of the place is 10 kW. and the latent heat gain is 2.5 kW.> Outdoor conditions: 32 °C DB, %50 RH.> Indoor conditions: 20 °C DB. %50 RH.> Take the relative humidity of the air passing through the cooling coil 90% at the coil outlet. > The total air flow rate in the mixing chamber is 3000 m3/h> Take the density of the air as 1.2 kg/m3Based on the above. Calculate the amount of fresh air. What is the value of enthalpy of blowing air. Calculate the ratio of by-pass air at cooling coil. Calculate the flow rate of by-passed air.
1- what's is the main benefit for the cooling tower packages . 2- compare the value of heat that rejected from water with the heat adding to the air and explain the Couse of difference . 3- make a search about cooling tower deals with the following items , a) the kind of cooling tower ., b) the problems that resisted the work of the cooling tower . c) define the approach and pointed the condition that deepened on .
Air enters a humidifier at 34.25°C and 30% RH. If the air leaves the humidifier at 70% RH. Determine: The exit dry-bulb temperature of the air in °C.The saturation effectiveness in %.
Total heat input (Qin)Notes: Assume the steam is reheated to the inlet temperature of the high-pressure turbine. The moisture content of the steam at the exit of the low-pressure turbine is not to exceed 9.5%
An 500-HP engine with a thermal efficiency of 30% is using a remote radiator which absorbs 20% of the heat supplied to the engine. Cooling system with cooling tower is used with a cooling range of 5°C. The temperature rise after passing the remote radiator is 10°C. Air enters the cooling tower at 30°C dry-bulb; 20°C wet-bulb temperatures and leaves the tower at 38°C & 65%RH. Make a schematic diagram of the system, the process in the provided psychrometric chart and calculate the following: (a.) The amount of cooling water for the engine, kg/min; (b.) The water flow rate in the cooling tower in liters per hour; and (c.) If the heat absorbed by air is 5% of heat absorbed by the cooling tower water, what is the air flow needed in cu.m/hour.