The plan dimensions of a public hall in a village measures 8.5 m * 20 m. The roof of the building is mono pitched where the low eave height is 3 m and the high eave height is 4.5m. If wind direction is considered at 180', determine the net effect of external and internal pressure coefficients for the zones of mono pitched roof. Openings in windward side: three windows of dimension: 2 m * 2 m. Openings in leeward side: two doors of dimension: 2.5 m * 2 m. Openings in wind parallel sides: one window, in each side, of dimension: 2 m* 1.5 m.

The plan dimensions of a public hall in a village measures 8.5 m * 20 m. The roof of the building is mono pitched where the low eave height is 3 m and the high eave height is 4.5m. If wind direction is considered at 180', determine the net effect of external and internal pressure coefficients for the zones of mono pitched roof. Openings in windward side: three windows of dimension: 2 m * 2 m. Openings in leeward side: two doors of dimension: 2.5 m * 2 m. Openings in wind parallel sides: one window, in each side, of dimension: 2 m* 1.5 m.

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

A vertical triangular gate 1.2 high have its 2m base flushed with water surface. Determine the location of the center of pressure from the top.
According to the NBCC 2015, a building with multiple windows and doors with a non-uniform distribution, and no dominant opening will have an internal pressure coefficient, ???, of _____ to evaluate the maximum internal wind pressure acting towards the wall surfaces.a) -0.45 b) 0.75 c) 0.3
1. A vertical rectangular gate is 4 ft. wide and 6 ft. high. Its upper edge is horizontal and on the water surface. What is the total pressure on the gate and where is the center of pressure? 2. Solve Problem 1 if the water surfsce is 5 ft. above the top of the gate, other conditions remaining the same. 3. Solve Problem 2 if the plane of the gate makes an angle of 30° with the vertical, other conditions remaining unchanged.
A gate slanted 60° from the horizontal with width of 1.6 m and height of 2.4 m is submerged to a certain depth such that the top of the gate is 1.8 m from the water surface. Compute the pressure at the bottom of the gate.
A closed storage building is located on open flat terrain in central Ohio. If the sidewall of the building is 20 ft high, determine the external wind pressure acting on the windward and leeward walls. Each wall is 60 ft long. Assume the roof is essentially flat.
A vertical triangular gate having a height “h” and a base “b” issubmerged in water. Identify the following: 1. Depth of center of pressure with its vertex at the liquid surface.2. If the vertex is 1 meter below the surface, determine the locationof center of pressure from the surface if b = 4 m and d = 3 m,and3. determine its hydrostatic pressure on one side of the gate.
A concrete wall is 1.2 meters high and 0.203 meters thick. Concrete has a specific gravity of 23,7 kN/m3 In connection with heavy rain, water fills between the wall and the ground. The height of the water is h . The wall rests on the ground without any form of anchoring. A)Calculate the maximum height,h , that the rainwater can reach before the wall topples B)Calculate how thick the wall must be so that it does not topple over if h= 1,2m
A gate slanted 60 degrees from the horizontal with width = 1.6 m and height = 2.4 m is submerged by a depth of 1.8 m, determine the pressure at the top of the gate in Pa. Use whole number.
Determine the external wind pressure on the roof of the rigid-gabled frame of an apartment building shown in Fig. P2.12. The building is located in the Los Angeles area of California, where the terrain is representative of exposure B. The wind direction is normal to the ridge as shown.
Wind blows on the side of the fully enclosed agriculture building located on open flat terrain in Oklahoma. Determine the external pressure acting over the windward wall, the leeward wall, and the side walls. Also, what is the internal pressure in the building which acts on the walls? Use linear interpolation to determine qh.
Find the total water pressure in kN on a vertical circular gate 2m in diameter with its top 3.5 meters below the water surface
A vertical gate has its one face just completely in contact with water while the other face is exposed to the atmosphere. Determine the location of the center of pressure, reckoned from the top edge, of the side in contact to the water.