The rear window of an automobile is defogged by passing warm air over its inner surface. If the warm air is at T = 40°C and the corresponding convection coefficient is h; = 30 W/m².K, what are the inner and outer surface temperatures, in °C, of 4-mm-thick window glass, if the outside ambient air temperature is T = -27.5°C and the associated convection coefficient is h = 65 W/m².K? *0,0 Evaluate the properties of the glass at 300 K. Tsi = Tse = i i °℃ °C

The rear window of an automobile is defogged by passing warm air over its inner surface. If the warm air is at T = 40°C and the corresponding convection coefficient is h; = 30 W/m².K, what are the inner and outer surface temperatures, in °C, of 4-mm-thick window glass, if the outside ambient air temperature is T = -27.5°C and the associated convection coefficient is h = 65 W/m².K? *0,0 Evaluate the properties of the glass at 300 K. Tsi = Tse = i i °℃ °C

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter19: Temperature, Thermal Expansion And Gas Laws

Section: Chapter Questions

Problem 39PQ

See similar textbooks

Similar questions

An aluminum rod 0.500 m in length and with a cross sectional area of 2.50 cm2 is inserted into a thermally insulated vessel containing liquid helium at 4.20 K. The rod is initially at 3(H) K. (a) If one-halt of the rod is inserted into the helium, how many liters of helium boil off by the time the inserted half cools to 4.20 K? Assume the upper half does not yet cool, (b) If the circular surface of the upper end of the rod is maintained at 300 K. what is the approximate boil-off rate of liquid helium in liters per second after the lower half has reached 4.20 K? (Aluminum has thermal conductivity of 3 100 YV/m K at 4.20 K; ignore its temperature variation. The density of liquid helium is 125 kg/m3.)
At 25.0 m below the surface of the sea, where the temperature is 5.00C, a diver exhales an air bubble having a volume of 1.00 cm3. If the surface temperature of the sea is 20.0C, what is the volume of the bubble just before it breaks the surface?
The convection heat transfer coefficient for a clothedperson standing in moving air is expressed as h = 14.8V 0.69for 0.15 < V < 1.5 m/s, where V is the air velocity. For aperson with a body surface area of 1.7 m2 and an averagesurface temperature of 29°C, determine the rate of heat lossfrom the person in windy air at 10°C by convection for airvelocities of (a) 0.5 m/s, (b) 1.0 m/s, and (c) 1.5 m/s.
A human body has a temperature of 30°C If its total surface area is 1.2 m2, what is the net rate of heat loss from the body by convection alone considering the surrounding temperature to be 24°C? Consider film coefficient to be h = 4.7 W/m2K.
Water enters a 2.5-cm-internal-diameter thin copper tube of a heat exchanger at 15°C at a rate of 0.3 kg/s, and is heated by steam condensing outside at 120°C. If the average heat transfer coefficient is 800 W/m2·°C, determine the length of the tube required in order to heat the water to 115°C
During heavy exercise, the body pumps 2.00 L of blood per minute to the surface, where it is cooled by 2.00ºC . What is the rate of heat transfer from this forced convection alone, assuming blood has the same specific heat as water and its density is 1050 kg/m? (answer in W)
A naked patient undergoes surgery in a warm room. Determine the ratio Pc /Pe, where Pc is the heat-power lost from the patient due to air convection and Pe is the heat-power lost from the patient due to evaporation. Take the skin temperature to be 32oC, the room temperature to be 29oC, the total body area to be 1.3 m2, the emissivity e = 1.0, and the convection of coefficient, q = 7.1 W/(m2.K). Take water to be lost from the patient by evaporation at a rate of 40 g/(m2.hr) and assume this to be pure water.
Hot air at 80°C is blown over a 2-m * 4-m flat surface at 30°C. If the average convection heat transfer coefficient is 55 W/m2·K, determine the rate of heat transfer from the air to the plate, in kW.
A bilayer polymer swab (1.2 m long, 1.4 m wide, 5 cm thick) is placed on a hot plate,?which keeps the side of the slab touching the hot plate at 105 deg C. The thermal conductivity of layer 1 (2cm thick) is 0.44 W/ m-K and the thermal conductivity of Layer 2 ( 3cm thick) is 0.67 W/m-K. If the air surrounding the slab is 27 degree C and the convective heat transfer coefficient between the top of the slab and the air is 19W/m^2-K. What is the rate of heat transfer from the side of the slab touching the hot plate to air?
Calculate the natural convection heat transfer coefficient for a vertical stainless pipe, 100 mm outside diameter, 0.9 m long. The pipe surface temperature is 125 ° C, and the air temperature is 30 ° C. Convection coefficient = Answer W / m² ° C.
Suppose a human body's core internal temperature is 37.0°C, the skin temperature is 34.0°C, the thickness of the tissues between averages 0.85 cm, and the surface area is 1.42 m2. Calculate the rate of heat conduction, in watts, out of the human body.Numeric : A numeric value is expected and not an expression.Q/Δt = __________________________________________
Consider a 3-m-high rectangular enclosure consisting of two surfaces separated by a 0.1-m air gap at 1 atm. If the surface temperatures across the air gap are 30°C and –10°C, determine the ratio of the heat transfer rate for the horizontal orientation (with hotter surface at the bottom) to that for vertical orientation.