The rigid bars ABC and CD are supported by pins at A and D and by a steel rod at B. There is a roller connection between the bars at C. Compute the vertical displacement (in mm) of point C caused by the 50-kN load. Express your answer to two decimal places. Do not include the unit. * E = 200 GPa A = 300 mm2 L = 3 m | 50 kN 2 m 2 m A B D C 1.5 m 3 m

The rigid bars ABC and CD are supported by pins at A and D and by a steel rod at B. There is a roller connection between the bars at C. Compute the vertical displacement (in mm) of point C caused by the 50-kN load. Express your answer to two decimal places. Do not include the unit. * E = 200 GPa A = 300 mm2 L = 3 m | 50 kN 2 m 2 m A B D C 1.5 m 3 m

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

26 -The stair beam in the figure will have support reactions. A support is a fixed, B support is a sliding joint. loads P1= 15 kN, P2= 30 kN, dimensions a = 2 m, b = 6 m, c = 4 m. Accordingly, Ax = ?A) 30B) 18.75C) None.D) 3.75E) 0
A short spiral column carries an axial dead load of 118 kN and an axial live load of 235 kN. Use fc’ = 27.5 MPa, fy = 414 MPa. Use U = 1.2D + 1.6L, Ф = 0.65 1. Assuming ρ = 0.01, which of the following gives the diameter of the column section? * a. 200 mm b. 215 mm c. 220 mm d. 300 mm 2. Which of the following gives the number of 16 mm diameter main bars? a 3 pcs b. 4 pcs c. 5 pcs d. 6 pcs 3. Which of the following gives the spacing of spirals? a. 10 mm Ф b. 55 mm Ф c. 60 mm Ф d. 65 mm Ф
ASAP PLEASE. 4 DECIMALS What is the value of R1 in kN? What is the value of R2 in kN? Locate the point of zero shear from point A in meters.
q: A load P is supported by a structure consisting of rigid bar BDF and three identical 15-mm-diameter steel E = 200 GPa rods, as shown inthe figure. Use a = 2.787 m, b = 1.901 m, and L= 5 M.For a load of P = 136 kN, determine thedisplacement of joint D. Unit should be in mm
c. Calculate "P" in KN considering failure on bearing on projected area. Two A36 16mm Thick Steel Plates Are Connected By Four Rivets With Fv=152 MPa As Shown. Given: Rivet Dia 20 mm x=100 mm
Determine the diameter of each steel wire connected to the rigid members AB and DC. The members were originally horizontal. After the application of the 300 kN load, a vertical displacement of 1cm occurred at the point of application, let us say point I. Use E – 200 GPa.
Calculate and draw the internal forces created at H section of the bracket beam? a = 500 mm b= 200 mm Px= 15 Kn Py=0 Kn Pz = 10 Kn
A 5.0m simple beam supports the given floor loads Wu and a concentrated load Pu due to the wall transverse to the given beam. Answer the following questions given the sections of the beam. Calculate the effective depth of the section in PART A in mm.0 Use 3 decimal places in all your computations except for strain and rho(5 decimal places).
If P= 8.571 kN, Determine the stress in member CEassuming that the area in steel is 24 mm2.Show FBD
3. Two 10”-15.3 lb channels are welded together as shown in the figure. Find themoment of area of the upper channel about the horizontal centroidal axis xo of the entire section.
Determine the tension at AC. A. 55.23 kN B. 52.53 kN C. 32.55 kN D. 25.35 kN
Solve the problem completely and neatly. Use 3 decimal places in all your computations except for strain and rho(5 decimal places). Design the number of 36 mm diameter bars to support the maximum positive moment of Mu=1600 kN.m. Use f'c=28MPa, fy=345MPa, h=800mm, bf=1000mm, bw=400mm, flange thickness=100mm, stirrups=10mm, and cc=40mm. Calculate the effective depth of the final section in mm.0 Calculate the depth of the compression block of the final section in mm.0 Calculate the depth of the neutral axis of the final section in mm.0 Calculate the ultimate moment capacity of the final section in kN.m.0