The room of a dwelling receives energy from the sun during the day. The roof temperature becomes too hot to touch. For a roof-surface temperature of 65°C and an ambient air temperature of 20°C, determine convective heat transfer coefficient. The roof makes an angle of 45° with the vertical and has a length of 5 m

The room of a dwelling receives energy from the sun during the day. The roof temperature becomes too hot to touch. For a roof-surface temperature of 65°C and an ambient air temperature of 20°C, determine convective heat transfer coefficient. The roof makes an angle of 45° with the vertical and has a length of 5 m

Principles of Heat Transfer (Activate Learning with these NEW titles from Engineering!)

8th Edition

ISBN:9781305387102

Author:Kreith, Frank; Manglik, Raj M.

Publisher:Kreith, Frank; Manglik, Raj M.

Chapter2: Steady Heat Conduction

Section: Chapter Questions

Problem 2.60P

See similar textbooks

Similar questions

Heat is transferred at a rate of 0.1 kW through glass wool insulation (density=100kg/m3) with a 5-cm thickness and 2-m2 area. If the hot surface is at 70C, determine the temperature of the cooler surface.
2.38 The addition of aluminum fins has been suggested to increase the rate of heat dissipation from one side of an electronic device 1 m wide and 1 m tall. The fins are to be rectangular in cross section, 2.5 cm long and 0.25 cm thick, as shown in the figure. There are to be 100 fins per meter. The convection heat transfer coefficient, both for the wall and the fins, is estimated to be K. With this information determine the percent increase in the rate of heat transfer of the finned wall compared to the bare wall.
A cooling system is to be designed for a food storage warehouse for keeping perishable foods cool prior to transportation to grocery stores. The warehouse has an effective surface area of 1860 m2 exposed to an ambient air temperature of 32C. The warehouse wall insulation (k=0.17W/(mK)) is 7.5 cm thick. Determine the rate at which heat must be removed (W) from the warehouse to maintain the food at 4C.
3.16 A large, 2.54-cm.-thick copper plate is placed between two air streams. The heat transfer coefficient on one side is and on the other side is . If the temperature of both streams is suddenly changed from 38°C to 93°C, determine how long it takes for the copper plate to reach a temperature of 82°C.
Consider a person standing in a breezy room at 20°C. Determine the total rate of heat transfer from this person if the exposed surface area and the average outer surface temperature of the person are 1.6 m2 and 29°C, respectively, and the convection heat transfer coefficient is 6 W/m2 ·°C (Fig. 2–75).
A heating system is to be designed to keep the wings of an aircraft cruising at a veloeity of 900 km/h above freezing temperatures during flight at 12.200-m altitude where the standard atmospheric conditions are -55.4°C and 188 kPa. Approximating the wing as a cylinder of elliptical cross section whose minor axis is 30 cm and disregarding radiation, determine the average convection heat transfer coefficient on the wing surface and the average rate of heat transfer per unit surface area.
When is the heat transfer through a fluid conduction and when is it convection? For which case is the rate of heat transfer higher? How does the convection heat transfer differ from the thermal conductivity of the fluid?
For heat transfer purposes, a standing man can be modeled as a 30-cm-diameter, 175-cm-long vertical cylinder with both the top and bottom surfaces insulated and with the side surface at an average temperature of 34°C. For a convection heat transfer coefficient of 10 W/m2 ·°C, determine the rate of heat loss from this man by convection in an environment at 20°C.
An average man has a body surface area of 1.8 m2 and a skin temperature of 330C. The convective heat transfer coefficient for a clothed person walking in still air is expressed as h= 8.6V0.53 where V is the walking velocity in m/s. Assuming the average surface temperature of the clothed person to be 300C, determine the rate of heat lost by convection from an average man walking in still air at 100C at a walking velocity of 1.2 m/s.
What is a semi-infinite medium? Give examples of solid bodies that can be treated as semi-infinite mediums for heat transfer purposes.
A person puts a few apples into the freezer at 15°C cool them quickly for guestswho are about to arrive. Initially, the apples are at a uniform temperature of 20°C,and the heat transfer coefficient on the surfaces is 8 W/m2·K. Treating the apples as9-cm-diameter spheres and taking their properties to be 840 kg/m3, Cp 3.81 kJ/kg·K, k = 0.418 W/m·K, and α =10-7 m2/s, determine the center and surface temperatures of the apples in 1 h. Also, determine the amount of heat transfer from each apple. Solve this problem using analytical one-term approximation method (notthe Heisler charts). Answer: Center: 11.2 ℃, Surface: 2.7 ℃, heat transfer: 17.2 kJ
An engine block with a surface area measured to be 0.95 m2 generates a power output of 50 kW with a net engine efficiency of 35%. The engine block operates inside a compartment at 157°C and the average convection heat transfer coefficient is 50 W/m2·K. If convection is the only heat transfer mechanism occurring, determine the engine block surface temperature.