The rotor winding current for a four-pole synchronous ac generator with a distributed rotor winding having 263 series turns, a winding factor of 0.9, an air gap length of 0.6 mm, and a peak flux density of 1.6 T is, (a) 15.2 A (b) 14.2 A (c) 16.2 A (d) 13.2 A

The rotor winding current for a four-pole synchronous ac generator with a distributed rotor winding having 263 series turns, a winding factor of 0.9, an air gap length of 0.6 mm, and a peak flux density of 1.6 T is, (a) 15.2 A (b) 14.2 A (c) 16.2 A (d) 13.2 A

Electric Motor Control

10th Edition

ISBN:9781133702818

Author:Herman

Publisher:Herman

Chapter39: Synchronous Motor Operation

Section: Chapter Questions

Problem 14SQ: Induction motors and welding transformers require magnetizing current, which causes a. lagging power...

See similar textbooks

Related questions

Q: A long shunt generator delivers 25kW at 220V. The shunt, series and armature resistances are 500,…

Q: The terminal voltage of a 150 kW series generator is 600 V at rated load. Determine the generated…

Q: A two-pole Y-connected synchronous generator has a voltage level of 2300 V, a capacity of 1000 kVA,…

A: Given P=2 V=2300 V S=1000 kVA pf=0.8 lagging Ra=0.15 Ω Xa=1.1 Ω f=50 Hz PFW=24 kW Pcore=18 kW

Q: Example 1 A 3-phase, 2-pole induction motor is connected to a 50 Hz supply. Determine the…

A: Since you have asked multiple questions in a single request, we will be answering only the 1st…

Q: A3-phase, F--connected, 2-pole alternator nuns at 3,600 rp.m. If there are 500 conductors per phase…

A: 3ϕ,Y = 2 pole . #600 rpm , 500 conductors/phase ϕ = 0.1 , f= ? , Emf/phase = ? Ns = 120fPf= NsxP120…

Q: 3-phase, Hz, delta connected generator, its stator winding having 12 slots per pole pair and 6…

A: Assume that number of poles is 4 . Given data Although it is known that formula of prime mover…

Q: A long shunt compound generator has a shunt field with 1200 turns per pole and a series field with…

Q: 2. Described The basic principles of methods to start 3-phase induction motors below: A. Star-Delta…

Q: (a) Calculate the synchronous speed of an eight-pole induction motor when supplied with power from a…

A: Given: An induction motor has following specifications, Number of poles, P=8 Frequency of source,…

Q: What will be the front and back pitches of the 6-pole dc generator with a simplex 2-layer wave…

Q: Design a winding diagram given the following specifications. • Simplex Wave Progressive Winding •…

A: We need to design a simplex wave progressive winding for the following configuration: number of…

Q: The rotor winding current for a four-pole synchronous ac generator with a distributed rotor winding…

A: Here, we have a four-pole synchronous ac generator with a distributed rotor winding with 263 series…

Q: The reactance's of the alternator during the periods of the subtransient, transient and steady state…

A: As damper winding time constant is very less so damper winding is out of circuit at the end of the…

Q: A 25 kVA, 220V, 3φ alternator delivers rated kVA at a power factor of 0.84. The effective ac…

A: Pout= 250.84 = 21KWI0 =250003×220=65.61ARa =Rt2=0.182=0.09 ohmLosses:-a) armature winding- Pa =…

Q: A long-shunt compound generator delivers a load current of 50A at 500V and has armature, series…

Q: The dc shunt generator given its rated voltage when the field resistance is higher than critical. O…

A: We know that the critical field resistance is the highest allowable shunt field winding resistance…

Q: 420 V, three-phase 60 Hz, star connected, induction machine has the following parameters: = 0.15…

Q: A 420 V, four-pole, 25 kW DC generator has a wave-connected armature winding with 846 conductors.…

A: Given Data V = 420 V Z = 846 conductor A = 2 P = 4 B = 0.5 wb lg = 0.004 m

Q: A 230-V, 50-Hz, 6-pole, single-phase induction motor has the following constants. n = 0.12 Q, r, =…

Q: In a DC machine, _provides the magnetic path as well as the mechanical support to the whole machine.…

A: we will consider function of each option to answer the given question .

Q: A 4-pole induction motor and a 6-pole induction motor are connected in cumulative cascade. The…

A: We have been given two motors that are connected in cumulative cascade. one motor is 4 pole…

Q: If rotor of an induction motor runs at synchronous speed, slip will be equal to 1. Select one: O…

A: Given: Rotor of Induction motor running at synchronous speed

Q: "The series field winding of a 170 kW, 250 V, 1450 rpm compound generator has a resistance of…

A: The series field winding of a compound generator has the given value Power Pl=170 kW=170000 W…

Q: The plate of an induction motor include the following data: P=2364W, cos(phi)=0.95, 50HZ, 234rpm,…

Q: a) The figure below shows the per-phase equivalent circuit of a two- pole three-phase induction…

Q: cion 1 ne plate if an induction motor include the following data: P=5954W, cos(phi)-0.94, 50HZ,…

Q: A 4-pole short shunt compound generator has armature, series-field and shunt-field resistance of 1…

A: Given short shunt compound generator P=4ra=1ΩRse=0.5ΩRsh=100ΩPout=4KWVt=200 vVb=1 v

Q: The plate of an induction motor include the following data: P=2364W, cos(phi)=0.95, 50HZ, 234rpm,…

Q: A 13.8 kV, 50-MVA, 0.9 p.f., 60 Hz, four pole, Y-connected synchronous generator has a synchronous…

A: It is Given that:terminal voltage Vt=13.8kv rating of power gernerator=50 MVAPower…

Q: A long-shunt d.c. compound generator supplies 100A at 190V. The resistance of armature, series field…

A: Given: I =100 V=190v Ra= 0.02 Rse=0.06 Rsh=85

Q: See attached.

A: Given:

Q: A 4 pole shunt generator delivers 195 A at a terminal voltage of 245 V. Ra and Rsh are 0.032 and 702…

Q: ) Discuss the relationship between the starting torque and supply voltage of rotating transformer…

A: Here the term rotating transformer is referred to three phase induction motor and the torque is…

Q: 13-1 In a 2-pole induction machine, establishing the rated air gap flux density requires that i, =4…

A: Given: In a 2-pole induction machine, establishing the rated air gap flux density requires that Iˆm…

Q: 2. A 72 slot three phase stator armature is wound for six poles. Using double layer lap coils having…

Q: A wave wound armature of an eight-pole DC shunt generator has 51 slots, each - slot contains 16…

Q: A 230V series motor with 4-pole, 600 conductors wave-connected supplying a load of 7.5kW by taking…

A: We know torque=power/(speed in radian per second) Now derive the formula and solve

Q: A Short shunt compound generator delivers a load current of 47 A at 244 V, and has the armature,…

A: Find the generated voltage of the short compound generator. Short shunt compound generator, shunt…

Q: In 2-pole machines: the wave winding have greater generated voltage than *.the lap winding armatures…

A: The formula for generated voltage is: E=P×ϕ×N×Z60×A Where, P: Number of poles ϕ: Flux/pole N: Speed…

Q: A three-phase, 60-cycle, 32-pole synchronous generator has a sinusoidally distributed air-gap flux…

Q: The rotor winding current for a four-pole synchronous ac generator with a distributed rotor winding…

A: Given data: g=0.6 mmBpeak=1.6 TNr=263

Q: A synchronous generator with 6 magnetic poles supplies an induction threephase motor. Considering…

A: Pole: This is placed at the stator and on this winding will be done. With the help of the pole…

Q: A three-phase induction motor operates at a slip of 3% and has a rotor copper loss of 300W. The…

Q: 6. A three-phase, 6-pole, 72 slots armature of a synchronous generator is wound using two-layer lap…

Q: : A short-shunt d.c. compound generator supplies 200 A at 100 V. The resistance of armature, series…

Concept explainers

Three Phase Induction Motor

The induction motor is an electric motor that runs on AC (alternating current) and it is of two type single phase motor that work on single-phase power supply and three-phase motor that work on three-phase power supply.

Question

The rotor winding current for a four-pole synchronous ac generator with a distributed
rotor winding having 263 series turns, a winding factor of 0.9, an air gap length of 0.6
mm, and a peak flux density of 1.6 T is,
(a) 15.2 A
(b) 14.2 A
(c) 16.2 A
(d) 13.2 A

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1: given data

VIEW

Step 2: solution

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, electrical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Name three factors that determine the torque produced by an induction motor.
The rotor winding current for a four-pole synchronous ac generator with a distributed rotor winding having 263 series turns, a winding factor of 0.9, an air gap length of 0.6 mm, and a peak flux density of 1.6 T is,
A long shunt compound dc generator delivers a load current of 78 A at 466 V and has armature, series field and shunt field resistances of 0.077 Ω, 0.04 Ω, and 290 Ω, respectively. Calculate the armature current in ampere (up to four decimal places).
A seperately excited dc generator has the following data: armature resistance , 0.06 Ω; field resistance, 112 Ω, total core and mechanical losses, 966 W; votlage across the field , 230V. The generator supplies a load at a terminal voltage of 230V. Calcaulte the armature current at which the generator has a maximum efficiency.
A long shunt compound dc generator delivers a load current of 69 A at 396 V and has armature, series field and shunt field resistances of 0.096 Ω, 0.014 Ω, and 259 Ω, respectively. Calculate the armature current in ampere.
given a progressive 2-layer simplex lap winding for a 4 pole dc generator having 20 slots and 20 commutator segments, determine the coil pitch, front pitch, back pitch, commutator pitch.
A short shunt compound dc generator delivers a load current of 30 A and 200 V and has armature, series field and shunt field resistance of 0.05-ohm, 0.03 ohm and 200 ohms respectively. Calculate the generated voltage (allow 1 V for brush contact drop)
A short-shunt connected compound DC generator delivers 219 A to a load at 250 V. Its shunt-field resistance is 26.8Ω, its shunt-field rheostat resistance is 6.2Ω, its series-field resistance is 0.042Ω, and its armature resistance is 0.096Ω. Find the copper losses in ... A) the shunt-field winding, a) 382.5 W b) 1653.4 W c) 2014.36 W d) none of the above B) the shunt-field rheostat, a)382.5W, b)2014.36, c)4940.25W, d) none C) the series field, a)382.5W, b)1653.4W, c)2014.36, d) none D) the armature winding, a) 382.5W, b)2014.36W, c)4940.25W, d) none
A short shunt compound DC generator supplies a load of 10A at a voltage of 10 volts. If the resistances of Armature, shunt field and series field windings are 0.01 ohm, 1 ohm and 0.00 ohm respectively. c) write down the factors to improve the generated voltage. Generated Voltage is 10.2 V
SYNCHRONOUS GENERATOR A 13.8 kV, 50-MVA, 0.9 p.f., 60 Hz, four pole, Y-connected synchronous generator has a synchronous reactance of 2.5 ohms, and an armature resistance of 0.2 ohm. At 60 Hz, its friction and windage losses are 1 MW, and its core losses are 1.5 MW. The field circuit has a dc voltage of 120 V, and the maximum field current is 5A. The current of the field circuit is adjustable over the range from 0 to 10 A. The OCC of this generator is shown in the figure.
A short shunt compound DC generator supplies a load of 10A at a voltage of 10 volts. If the resistances of Armature, shunt field and series field windings are 0.01 ohm, 1 ohm and 0.00 ohm respectively. c) Write down the factors to improve the generated voltage.
A short shunt compound DC generator supplies a load current of 10A at a voltage of 10 volts. If the resistance of armature, shunt field and series field windings are 0.001 ohm, 1 ohm 0.00 ohm respectively. c) write down the factors to improve the generated voltage.