The round holes drilled in the sides and decks to illuminate the interior of the ships are called "portholes". If the center of a 30 cm diameter porthole of a ship is 10 m below the water level, how many N is the hydrostatic force acting on this porthole? Take the density of the water as 1000 kg / m3, the gravitational acceleration as 10 m / s2 and the value as 3

The round holes drilled in the sides and decks to illuminate the interior of the ships are called "portholes". If the center of a 30 cm diameter porthole of a ship is 10 m below the water level, how many N is the hydrostatic force acting on this porthole? Take the density of the water as 1000 kg / m3, the gravitational acceleration as 10 m / s2 and the value as 3

Name: The round holes drilled in the sides and decks to illuminate the inter
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: The round holes drilled in the sides and decks to illuminate the interior of the ships are called "portholes". If the center of a 30 cm diameter porthole of a ship is 10 m below the water level, how many N is the hydrostatic force acting on this port

International Edition---engineering Mechanics: Statics, 4th Edition

4th Edition

ISBN:9781305501607

Author:Andrew Pytel And Jaan Kiusalaas

Publisher:Andrew Pytel And Jaan Kiusalaas

Chapter8: Centroids And Distributed Loads

Section: Chapter Questions

Problem 8.90P: The hemispherical glass bowl is filled with water. Find the location y of the center of gravity of...

See similar textbooks

Similar questions

at height of 10 km (33000 ft) above sea level atmospheric pressure is about 210 mm of mercury. what is the resultant normal force on 600 cm^2 window of an airplane flying at this height? assume the pressure inside the plane is 760 mm of mercury. the density of mercury is 13600 kg/m^3
A plane is fitted with pontoons for operation on lakes. As it taxies out for take-off, the plane itself weighs 10670 Newtons (2849lbs), it has 40 gallons of gasoline in its tanks, and the pilot and passenger together weigh 1513 Newtons (340 lbs). One gallon of gasoline weighs 25 Newtons (5.67lbs). What is buoyant force on the plane when it floats in a body of water? Take the mass density of water to be 1000 kg/m3 and the acceleration due to gravity as 9.8 m/s2 what volume of water do the pontoons displace?
A plane is fitted with pontoons for operation on lakes. As it taxies out for take-off, the plane itself weighs 10670 Newtons (2849lbs), it has 40 gallons of gasoline in its tanks, and the pilot and passenger together weigh 1513 Newtons (340 lbs). One gallon of gasoline weighs 25 Newtons (5.67lbs). What is buoyant force on the plane when it floats in a body of water? Take the mass density of water to be 1000 kg/m3 and the acceleration due to gravity as 9.8 m/s2
Consider a heavy car submerged in water in a lake with a flat bottom. The driver’s side door of the car is 1.5 m high and 1 m wide, and the top edge of the door is 15 m below the water surface. Determine the resultant hydrostatic force acting on the door in Newtons.
1. A beaker of circular cross section of radius 8 cm is filled with mercury up to a height of 6 cm. Find the force exerted by the mercury on the bottom of the beaker. The atmospheric pressure = 105 N m. Density of mercury - 13600 kg/m3 . Take g =10
11. A metal plate has the shape of an equilateral triangle with a side length of 2 meters. It is submerged verticallyin water so that the base of the triangle is 5 meters below the surface of the water. How much hydrostaticforce is exerted against the plate due to the hydrostatic pressure of the water? this is the answer but I'm sure how to solve for it F = ρg(5sqrt(3) − 1) N
A 7-cm diameter solid aluminum ball (SG = 2.70) and a 3.8-cm diameter solid brass ball (SG = 8.50) balance nicely when submerged in a fluid as shown in the figure. What is the specific gravity of the fluid? Neglect the friction on the pulleys. Please only round off on the final answer. Use three decimal places.
A force sensor is immersed in a iquid with a density of 61 lb/ to a depth of 42 in and then placed in a second liquid with a density of 732 N/. What is the change in force on the sender if the diameter of the sensor is 8 cm and the change in depth is 5.9 cm?
In the manometer above, point 2 is open and is exposed to the surroundings. Also, the water tank is pressurized by air from the inside as shown in the figure. If h1 = 22cm, h2 = 0.35m, and h3 = 47cm, and assuming that the acceleration due to gravity is 9.81m/s2, (density of water = 1011 g/L, density of oil = 770 kg/m3, density of mercury has a density of 13.75 kg/dm3) A) Calculate the gauge pressure (in torr) of the air inside the tank. B) Show in your diagram all the parts that can be cancelled in the pressure balance. C) Calculate the pressure at point C (in kPa).
Consider the gate shown The gate has a width of 1 m. ρw = 1.0 Mg/m^3. Suppose that a = 2.5 m, b = 1.5 m, c = 1.35 m. Determine the magnitude of the resultant force acting on the gate ABC due to hydrostatic pressure.
1. A vertical semi-circular area of radius r is submerged in a liquid with its diameter in the liquid surface. How far is the center of pressure from the liquid surface? 2. An open vat holding oil (s=0.80) is 8 m long and 4 m deep and has a trapezoidal cross-section 3 m wide at the bottom and 5 m wide at the top. Determine the following: (a) the weight of oil, (b) the force on the bottom of the vat, and (c) the force on the trapezoidal end panel.
A rectangular car is 3 m. long by 1.5 m wide and 1.5 m deep. If friction is neglected and the car rolls down a plane with an inclination of 20 degrees, what is the inclination of the water surface if the car contained 0.60 m depth of water when the car was horizontal?