An open tank consists of 3 immiscible liquids, in which the water is at the height of 500 cm, above which a crude oil of specific gravity of 0.75 is filled up to a height of 1200 mm, above which a coconut oil of specific gravity of 0.7 is filled for about 3 m. Find (i) the intensity of pressure in kPa at the interface between coconut oil & crude oil

An open tank consists of 3 immiscible liquids, in which the water is at the height of 500 cm, above which a crude oil of specific gravity of 0.75 is filled up to a height of 1200 mm, above which a coconut oil of specific gravity of 0.7 is filled for about 3 m. Find (i) the intensity of pressure in kPa at the interface between coconut oil & crude oil

Name: An open tank consists of 3 immiscibleliquids, in which the water is a
Uploaded: 2024-03-20T06:56:55.000Z
Channel: Bartleby
Description: An open tank consists of 3 immiscibleliquids, in which the water is at the height of500 cm, above which a crude oil of specificgravity of 0.75 is filled up to a height of 1200mm, above which a coconut oil of specificgravity of 0.7 is filled for abou

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

A hydraulic lift is to be used to lift a 2500 kg weight by putting a weight of 25 kg on a piston with a diameter of 10 cm. Determine the diameter of the piston on which the weight is to be placed
The U-tube at both ends is open to the atmosphere. And the liquid between water and oil does not mix on different sidesWhere d = 12.3 mm as shown and a = 67.5 mm, find the density of oil. [Let the water density be 1000 kg / m ^ (3)] and answer in kg / m ^ (3).
The surface tension of fluid in contact with air at 25oC is 0.51 n/m. The pressure inside a droplet is to be 0.05 N/cm2 greater than outside pressure. Determine the diameter of the droplet
Given an atmospheric pressure of 16.5 psia and an absolute pressure of 30.5 in. Hg, make these convertions: (e) 45 psi vacuum to psia and to Pa (f) 38 psia to atmospheres, and to in. Hg abs (g) 13 psi vacuum to Pa and to atmospheres (h) 8 in. Hg gage to psia, and to Pa
A closed cylindrical tank contains 2.6m of water, 5.4m of oil (s=0.82) and the air above the oil has pressure of 61 kpa. If an open mercury manometer at the bottom of the tank has 1m of water, determine the deflection of mercury in mm.
Mercury levels in both arms in the system given in the figureDecipher the difference between (X). (lpg = 0.75 t/m3 ).. YAĞ : Oil SU : watter yoğunlukları : density.
A hydraulic lift is to be used to lift a 1900-kg weight by putting a weight of 25 kg on a piston with a diameter of 10 cm. Determine the diameter of the piston on which the weight is to be placed.
A glass tube 1.6m long and having a diameter of 2.5cm is inserted vertically into a tank of oil (s.g. = 0.80) with the open end down and the closed end uppermost. If the open end is submerged 1.30m from the oil surface, determine the height to which the oil will rise in the tube. Assume barometric pressure is 100 KPa and neglect vapor pressure.
The liquid inside the tank on the left side of the 2000 mm wide rectangular shaped lid hinged from the O point, which is seen in the middle of the figure, is under pressure of -22.50 kPa, and on the right side there is oil with a density of d= 0.80. Find the intensity and direction of the force that will act on the O point in order for this cover to remain in balance (Y(liquid)=0.9 kg/lt, Ig=bh^3/12). (Hava=air, Sıvı=liquid, yağ=oil)
How long will it take the water surface in the tank shown to drop from h = 3 m to h = 50 cm?
The viscosity of a fluid is to be measured by a viscometer constructed of two 40-cm-long concentric cylinders . The outer diameter of the inner cylinder is 12 cm, and the gap between the two cylinders is 0.15 cm. The inner cylinder is rotated at 300 rpm, and the torque is measured to be 1.8 N⋅m. Determine the viscosity of the fluid.
Piston A has a cross-section of 1,200 cm^2 while that of piston B is 950 cm^2 with the latter higher than piston A by 1.75 m. If the intervening passages are filled with oil (s= 0.8), what is the difference in pressure between A and B?