The space to the right of the y axis in (Figure 1) contains a uniform magnetic field of unknown magnitude that points in the positive z direction. As a conducting square loop placed in the xy plane (oriented with its horizontal and vertical sides parallel to the xx and yy axes) moves to the right across the y axis at a constant speed of 2.0 m/s, a 0.42-V emf is induced in the loop. If the side length of the loop is 0.30 mm, what is the magnitude of the magnetic field? B=?

The space to the right of the y axis in (Figure 1) contains a uniform magnetic field of unknown magnitude that points in the positive z direction. As a conducting square loop placed in the xy plane (oriented with its horizontal and vertical sides parallel to the xx and yy axes) moves to the right across the y axis at a constant speed of 2.0 m/s, a 0.42-V emf is induced in the loop. If the side length of the loop is 0.30 mm, what is the magnitude of the magnetic field? B=?

Physics for Scientists and Engineers: Foundations and Connections

1st Edition

ISBN:9781133939146

Author:Katz, Debora M.

Publisher:Katz, Debora M.

Chapter32: Faraday’s Law Of Induction

Section: Chapter Questions

Problem 39PQ: A thin conducting bar (60.0 cm long) aligned in the positive y direction is moving with velocity...

See similar textbooks

Similar questions

A thin conducting bar (60.0 cm long) aligned in the positive y direction is moving with velocity v=(1.25m/s)i in a region with a spatially uniform 0.400-T magnetic field directed at an angle of 36.0 above the xy plane. a. What is the magnitude of the emf induced along the length of the moving bar? b. Which end of the bar is positively charged?
A flat loop of wire consisting of a single turn of cross-sectional area 8.00 cm2 is perpendicular to a magnetic field that increases uniformly in magnitude from 0.500 T to 2.50 T in 1.00 s. What is the resulting induced current if the loop has a resistance of 2.00 ?
A square loop with side length L, mass M, and resistance R lies in the xy plane. A magnetic field B = B0(y/L) k is present in the region of the space near the loop. Determine the magnitude and direction of the induced current in the loop as the loop starts moving at velocity v = B0(y/L) j.
A flat, square coil of 20 turns that has sides of length 15.0 cm is rotating in a magnetic field of strength 0.050 T. If tlie maximum emf produced in die coil is 30.0 mV, what is the angular velocity of the coil?
The conducting rod shown in the accompanying figure moves along parallel metal rails that are 25-cm apart. The system is in a uniform magnetic field of strength 0.75 T, which is directed into the page. The resistances of the rod and the rails are negligible, but the section PQ has a resistance of 0.25 . (a) What is the emf (including its sense) induced in the rod when it is moving to tire right with a speed of 5.0 m/s? (b) What force is required to keep the rod moving at this speed? (c) What is the rate at which work is done by this force? (d) What is the power dissipated in the resistor?
A single loop (N=l) of wire of radius r = 0.0300 m lies with its face parallel to the page. It is in an external uniform perpendicular magnetic field pointing OUT as shown in the diagram below by the dot surrounded by a circle ⊙. Suppose the external magnetic field magnitude is with rate △B/△t = 10.00 What is the area A of the wire loop? What is the magnitude IεI of the voltage induced in the wire loop ? The loop has resistance R = 40.0 Ω. What is the current I in the loop? In the figure below, indicate the direction of the current I, clockwise or counter-clockwise, in the loop. Draw a labeled curved arrow on the loop representing the current direction. In the figure below, indicate the direction of the induced magnetic field , in or out. Indicate this direction by drawing a labeled IN (×) or OUT ⊙ symbol within the circle.
In figure below, the magnetig flux through the circular loop of radius r = 1.8 m increases according to the relation ΦB = 5 t2 + 5t + 3, where ΦB is in Webers and t is in seconds. What is the magnitude and direction (clockwise or counterclockwise) of the induced current in the circular loop at t = 1.5 s if the loop has a total resistance of R = 12 Ω? (Choose clockwise direction as the positive and express the direction of the current by using plus or minus signs in the result, which must be in units of Amperes and include 2 digit after the decimal point. That means if you get a result of 9.22 and the direction of the current is clockwise, just type 9.22 or if you find the direction of the current to be counterclockwise, just type -9.22 in the answer box. Maximum of 5% of error is accepted in your answer.)
Suppose a conducting rod (mass m, resistance R) rests on two frictionless and resistanceless parallel rails a distance l apart in a uniform magnetic field B (⊥ to the rails and to the rod) as in the figure. At t = 0 the rod is at rest and a source of emf is connected to the points a and b. Find a formula for the net electric field in the moving rod as a function of time for the case, when the source puts out a constant current I. Find a formula for the net electric field in the moving rod as a function of time for the case when the source puts out a constant emf E0.
A loop of wire in the shape of a rectangle of width w and length L and a long, straight wire carrying a current I lie on a tabletop as shown in the figure below. What If? Suppose a constant current of I = 6.00 A flows in the straight wire and the loop moves from an initial position h0 = 1.00 cm toward the bottom of the figure at a constant speed of v = 24.0 cm/s. a) What is the magnitude of the induced emf (in V) in the loop 1.00 s after it begins to move? b) What is the direction of the induced current in the loop 1.00 s after it begins to move? clockwise, counterclockwise or The magnitude is zero?
An L=57.0 cm wire is moving to the right at a speed of v=7.50 m/s across two parallel wire rails that are connected on the left side, as shown in the figure. The whole apparatus is immersed in a uniform magnetic field that has a magnitude of B=0.930 T and is directed into the screen. What is the emf E induced in the wire? If the moving wire and the rails have a combined total resistance of 1.75 Ω, what applied force F would be required to keep the wire moving at the given velocity? Assume that there is no friction between the moving wire and the rails.
A long, straight wire (blue in the diagram) carries a current (moving toward the right) of i(t) = [(5.0A)− (2.0 A/s^2)t^2]. A circular loop (red) of radius 1.5 m and resistance 1.8 Ω is centered on and lying directly on top of the blue wire (but, since the wires are insulated, there is no electrical contact between them). What is the magnitude of the current induced in the red loop at time t = 1 s?
A conducting circular loop of wire with radius 0.0300 m and resistance 0.40 Ω sits in a region of spatially uniform magnetic field, as shown in the figure. The magnetic field is directed into the plane of the figure and it changes in time with the expression B(t) = 1.080 T - (0.360 T/s )∙t (here T represents the unit Tesla and t is the time)a) Give the magnetic flux through the loop as a function of time.b) Give the EMF induced in the loop as a function of time.c) Calculate the induced current at time t = 1.0 s. Show the steps that lead to youranswers.d) What is the direction of the current in the loop at t = 1.0 s? Explain/justify youranswer