There is a uniform capsule shaped (hemisperical on sides and cylindrical in between) transparentglass, with u = 2, and radius of curvature 10 cm (for spherical portion) kept in air :-u =ObjectA(A) For AB = 20 cm, a narrow parallel beam entering from left side will come out from other side asa parallel beam.(B) For ABparallel light beam will come out as a diverging beam.(C) For ABparallel light beam will come out as a parallel beam.(D) For surrounding u = 3/2, if emergent beam has to be parallel then AB has to be bigger than20 cm.20 cm, and surrounding air being replaced by a medium, u3/2, on both sides,20 cm, and surrounding air being replaced by a medium, u =3/2, on both sides,

Given data: The refractive index is μ=2 The radius of curvature is R=10 cm

There is a uniform capsule shaped (hemisperical on sides and cylindrical in between) transparent glass, with u = 2, and radius of curvature 10 cm (for spherical portion) kept in air :- Object А B (A) For AB = 20 cm, a narrow parallel beam entering from left side will come out from other side as a parallel beam. (B) For AB = 20 cm, and surrounding air being replaced by a medium, µ = 3/2, on both sides, parallel light beam will come out as a diverging beam. (C) For AB = 20 cm, and surrounding air being replaced by a medium, µ = 3/2, on both sides, parallel light beam will come out as a parallel beam. (D) For surrounding u = 3/2, if emergent beam has to be parallel then AB has to be bigger than 20 cm.

There is a uniform capsule shaped (hemisperical on sides and cylindrical in between) transparent glass, with u = 2, and radius of curvature 10 cm (for spherical portion) kept in air :- Object А B (A) For AB = 20 cm, a narrow parallel beam entering from left side will come out from other side as a parallel beam. (B) For AB = 20 cm, and surrounding air being replaced by a medium, µ = 3/2, on both sides, parallel light beam will come out as a diverging beam. (C) For AB = 20 cm, and surrounding air being replaced by a medium, µ = 3/2, on both sides, parallel light beam will come out as a parallel beam. (D) For surrounding u = 3/2, if emergent beam has to be parallel then AB has to be bigger than 20 cm.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Would a wooden cylinder (s = 0.61) 660mm in diameter and 1.3m long be stable if placed vetically in oil (s = 0.85)?
The solid sphere in Fig. is iron (SG ≈ 7.9). Thetension in the cable is 600 lbf. Estimate the diameter of thesphere, in cm.
The thickness of the laminar boundarylayer on a flat plate at a point A is 2 cmand at a point B, Im downstream of A, is3 cm. What is the distance of A from theleading edge of the plate?.
A vertical concentric annulus, with outer radius r o and innerradius r i , is lowered into a fl uid of surface tension Y andcontact angle θ < 90 ° . Derive an expression for the capillaryrise h in the annular gap if the gap is very narrow.
A solid cylinder of diameter D , length L , and density ρ sfalls due to gravity inside a tube of diameter D 0 . The clearance,D 0 - D <<, D , is fi lled with fl uid of density ρ andviscosity μ . Neglect the air above and below the cylinder.Derive a formula for the terminal fall velocity of the cylinder.Apply your formula to the case of a steel cylinder,D = 2 cm, D 0 = 2.04 cm, L = 15 cm, with a film of SAE30 oil at 20 ° C.
Can we use the Buckingham pi theorem to prove that the Froud number is dimensionless? Could someone show me how?
A block of wood (SG = 0.6) fl oats in fl uid X in Fig.such that 75 percent of its volume is submerged in fl uid X .Estimate the vacuum pressure of the air in the tank.
A smooth ceramic sphere (SG= 2.6) is immersed in a flowof water at 20°C and 25 cm/s. What is the sphere diameterif it is encountering (a) creeping motion, Red = 1 or (b)transition to turbulence, Red =250,000?
You open a restaurantand hope to entice customers byhanging out a sign (Fig. ).The uniform horizontal beam supportingthe sign is 1.50 m long, hasa mass of 16.0 kg, and is hingedto the wall. The sign itself is uniformwith a mass of 28.0 kg andoverall length of 1.20 m. The twowires supporting the sign are each32.0 cm long, are 90.0 cm apart,and are equally spaced from themiddle of the sign. The cable supportingthe beam is 2.00 m long.(a) What minimum tension mustyour cable be able to support without having your sign come crashingdown? (b) What minimum vertical force must the hinge be able to supportwithout pulling out of the wall?
A cube with edges of length L = 0.19 m and density ρc = 2.8×103 kg/m3 is totally submerged in water, with a density of ρw = 1.00×103 kg/m3, and oil, with a density of ρo = 0.93×103 kg/m3, as shown in the figure. The cube is submerged in the water to a depth of d = 0.055 m, while the rest of the cube is in oil. The cube is suspended by a taut string and is in static equilibrium. 1) Enter an expression for the magnitude of the buoyant force acting on the cube, in terms of ρw, ρo, L, d, and g. 2) Calculate the magnitude of the buoyant force, in newtons. 3) Enter an expression for the tension in the string, in terms of the defined quantities and g. 4) Calculate the tension in the string, in newtons.
A cube 2.2 feet on an edge has its lower half of s.g. = 11.8 and upper half of s.g. = 11 . It rests in a two-layer fluid, with lower sg. = 11.7 and upper s.g. = 11.05. Determine the height, h, of the top of the cube above the interface. See the Figure below. And explain step by step.
Venice, Italy, is slowly sinking, so now, especially inwinter, plazas and walkways are fl ooded during storms.The proposed solution is the fl oating levee of Fig. .When fi lled with air, it rises to block off the sea. The leveeis 30 m high, 5 m wide, and 20 m deep. Assume a uniformdensity of 300 kg/m 3 when fl oating. For the 1-m sea–lagoon difference shown, estimate the angle at which thelevee fl oats.