This question requires the use of the Thermodynamic Property Tables supplied as additional material. In addition, for steam, the specific ideal gas constant = 461.5 J/kg K A closed system is comprised of pure water substance initially at a temperature of 500 °C and a pressure of 20 MPa (state 1). The system undergoes an isochoric process whereby its pressure drops to 0.1 Mpa (state 2). (a) Evaluate the specific entropy and specific volume of the system at state 1. (b) Evaluate the specific entropy, specific volume and temperature of the system at state 2. (c) Sketch the process on a Temperature-specific entropy plot, showing the lines of constant pressure which pass through steps 1 and 2. (d) For state 1 evaluate the specific volume assuming the steam behaves as an ideal gas and comment on your result.

This question requires the use of the Thermodynamic Property Tables supplied as additional material. In addition, for steam, the specific ideal gas constant = 461.5 J/kg K A closed system is comprised of pure water substance initially at a temperature of 500 °C and a pressure of 20 MPa (state 1). The system undergoes an isochoric process whereby its pressure drops to 0.1 Mpa (state 2). (a) Evaluate the specific entropy and specific volume of the system at state 1. (b) Evaluate the specific entropy, specific volume and temperature of the system at state 2. (c) Sketch the process on a Temperature-specific entropy plot, showing the lines of constant pressure which pass through steps 1 and 2. (d) For state 1 evaluate the specific volume assuming the steam behaves as an ideal gas and comment on your result.

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

This question requires the use of the Thermodynamic Property Tables supplied as additional material.In addition, for steam, the specific ideal gas constant = 461.5 J/kg KA closed system is comprised of pure water substance initially at a temperature of 500 C and a pressure of 20 MPa (state 1).The system undergoes an isochoric process whereby its pressure drops to 0.1 Mpa (state 2).(a) Evaluate the specific entropy and specific volume of the system at state 1.(b) Evaluate the specific entropy, specific volume and temperature of the system at state 2.(c) Sketch the process on a Temperature-specific entropy plot, showing the lines of constant pressure which pass through steps 1 and 2.(d) For state 1 evaluate the specific volume assuming the steam behaves as an ideal gas and comment on your result.
Derive an expression for molar entropy of an equally spaced three-level system,where the spacing ε.
A well-insulated ice-water bath at 0.0°C contains 20 g ice. Throughout this experiment, the bath is maintained at the constant pressure of 1 atm. When a piece of nickel at 100°C is dropped into the bath, 10.0 g of the ice melts. Calculate the total entropy change for the thermodynamic universe of this process. (Specific heats at constant P: nickel, 0.46 J K-1 g-1 ; water, 4.18 J K-1 g-1; ice, 2.09 J K-1g-1. Enthalpy of fusion of ice, 334 J g-1.)
Bottom part only please, Discuss why the petrol engine is irreversible in terms of entropy and work lost due to the spontaneous flow of heat resulting from finite temperature differences.
One-quarter lbmol of oxygen gas (O2) undergoes a process from p1 = 20 lbf/in2, T1 = 500oR to p2 = 150 lbf/in2. For the process W = -500 Btu and Q = -202.5 Btu. Assume the oxygen behaves as an ideal gas. Determine T2, in oR, and the change in entropy, in Btu/oR.
Can someone explaine this problem please? A closed system contains an ideal gas, which molecular weight is W = 63.47 kg/kmol, and its standard state entropy is S0 = 0. The system undergoes the following cycle: at state 1 the temperature is 295.15 K, the pressure is 95 kPa (absolute), and the entropy is 46.450 J/(kg/kmol). The gas is compressed polytropically at n = 1.46 until the specific volume is 10 times lower than that at state 1 ( state 2 ). Then 85651.7 J/kg of heat is added at constant specific volume ( state 3). After that heat is added at constant pressure until entropy is 333.333 J/(kg.K) (state 4). In the next process the system undergoes isentropic expansion (and reaches state 5 ). Finally there is a constant volume rejection of heat (until state 1). Determine a) the values of p, v, T and s, at each cycle point; b) the p-V and T-s diagrams of cycle; c) the heat added to the system; d) the heat rejected by the system; e) the cycle net work; f) the mean effective pressure; g)…
Where necessary, assume air as an ideal gas and consider R = 287 J/(kg.K), Cp = 1005 J/(kg.K), Cv = 718 J/(kg.K). a) A nozzle is a device that is used to increase the velocity of a fluid by varying the cross-sectional area. At the last section of a jet engine (Fig Q1.a, section 5), air with a mass flow rate of 50 kg/s at a pressure of 500 kPa and a temperature of 600 K enters a nozzle with an inlet cross-sectional area of 5 m2. The exit area of the nozzle is 20% of its inlet area. The air leaves the nozzle at a velocity of 300 m/s. The nozzle is not well-insulated and during this process, 5 kJ/kg heat is lost. Figure Q1.a: Schematic of a Jet engine.(ii) Determine the density and velocity of the air entering thenozzle.
Where necessary, assume air as an ideal gas and consider R = 287 J/(kg.K), Cp = 1005 J/(kg.K), Cv = 718 J/(kg.K). a) A nozzle is a device that is used to increase the velocity of a fluid by varying the cross-sectional area. At the last section of a jet engine (Fig Q1.a, section 5), air with a mass flow rate of 50 kg/s at a pressure of 500 kPa and a temperature of 600 K enters a nozzle with an inlet cross-sectional area of 5 m2. The exit area of the nozzle is 20% of its inlet area. The air leaves the nozzle at a velocity of 300 m/s. The nozzle is not well-insulated and during this process, 5 kJ/kg heat is lost.Figure Q1.a: Schematic of a Jet engine. (i) In analysing this nozzle using the 1st law of thermodynamics, the change in which type of energy is negligible?
Select all correct statements below based on the increase of entropy principle__________ A. The entropy of an isolated system during a process always increases B. C. D. E.
What is the change in entropy when 120 g of superheated methanol gas at 1.00 bar and 110.0 °C is cooled and condensed to liquid methanol at 1.00 bar and 90.5 °C?
thermodynamics Oxygen at the rate of 3 lb/min undergoes a reversible isobaric process during which its entropy changes -0.35 Btu/lb-°R; V1=17.75 ft3and t1= 400 oF . For both nonflow and steady flow (ΔP = 0 , ΔK = 0 ) processes, compute (a) ΔU and ΔH , (b) W , (c) Q.
A rigid vessel of 0.075 m3 volume contains an ideal gas, CV = 5/2 R at 540 K and 1 bar. If heat in the amount of 15,800 J is transferred to the gas, determine its entropy change.