three trucks weighing 14,566kg, 15230kg, and 14021kg deliver HMA to the paver. The mat is 4.5m wide and 55mm thick with a density of 2250kg/m ³ If the starting station is 8+915, at which station (to the meter) should the paver be at after all 3 trucks have dumped? 2. 3. A paving job is nearing completion, and the foreman needs to let the plant know how much HMA is needed to complete. The calculations are based from station 1+330, and the finish station is 1+343. The mat is 3.7m wide x 55mm deep. The density at laydown is 2350kg/m Calculate the mass required to finish the job in kg.

three trucks weighing 14,566kg, 15230kg, and 14021kg deliver HMA to the paver. The mat is 4.5m wide and 55mm thick with a density of 2250kg/m ³ If the starting station is 8+915, at which station (to the meter) should the paver be at after all 3 trucks have dumped? 2. 3. A paving job is nearing completion, and the foreman needs to let the plant know how much HMA is needed to complete. The calculations are based from station 1+330, and the finish station is 1+343. The mat is 3.7m wide x 55mm deep. The density at laydown is 2350kg/m Calculate the mass required to finish the job in kg.

Fundamentals Of Construction Estimating

4th Edition

ISBN:9781337399395

Author:Pratt, David J.

Publisher:Pratt, David J.

Chapter10: Pricing Excavation And Backfill

Section: Chapter Questions

Problem 7RQ

See similar textbooks

Similar questions

note that this question is on chegg
Discuss about the solution grouts?
A project to move packed earth requires you to decide whether to usea dozer/scraper operation or excavator/truck operation. Determinethe most economical operation based on the dozer/scraper operationestimated at $1.25/cy. All equipment carries a rated heaped capacity, hasa fill factor of 100%, and works 45-min hours. Excavator costs $95/hr（including operator), cycle time is 0.28 min, and bucket heaped capacityis 5.0 cy. Truck costs $150/hr.(including operator), dump time is 0.5 min（maneuver, dump, turn), heaped capacity is 31.7 cy, and 12 trucks areavailable for the project.Hauling equipment operates in one directionfrom A to B to C and finally to D. Section Load Length (ft) Speed (mph) A full 3000 9B full 2500 17C empty 3000 36D empty 3000 16
Pls answer wt complete solution ty
P = 313 kN show your solution
Given the following information, determine the cost of excavation, the number of loads required toremove the material and how many days it will take to complete the job.o 5225m3 of material is to be excavatedo Equipment cost is $280/houro Operator cost is $55/houro Equipment can remove 55m3/houro Assume 20% swell in soil when excavated for removal off siteo Trucks can carry 10m3o Work 10hr days
Pls answer wt complete solution. Ty asap
Solve the following: show solutions thank you1. (9.58 ± 0.351) - (2.13 ± 0) =2. (6.33 ± 0.265) - (1.50 ± 0) =3. [(9.58 ± 0.351) - (2.13 ± 0)] * [(6.33 ± 0.265) - (1.50 ± 0)] =
Calculate the total operation time for this construction activity if the volume of soil to be removed is 8 cu.m. (considered 33% for bulking of materials.) The speed of dumptruck is 30 kph and travel distance (round trip) from the source to disposal area vice-versa is 6 km. The bucket size of excavator is 0.50 cu.m at 0.50 min loading time, tipping time is 4 mins. a. 15.18 minutes b. 22.02 minutes c. 25.32 minutes d. 30.00 minutes
(c) Giver the end area of cut and fill of soil as in Table Q4(c). If the material bulks after excavation about 10% and shrink 12%. Given, distance between chainage is 100 m. Draw the mass haul diagram and estimate how much excess cut or fill is required.
This is I'm uploading second time. Give me right solution with clear calculations
165g water500 g cementStarting time 2:00 pmTemperature at 3:06 pm =24.6 cTemprature at time 3:16 pm=27cWhat is the initial and final setting time? Time penetration 0 0 15 0 25 0 35 0 45 0 55 1 65 2 75 3 85 4