Treat A as a support wall and determine the Maximum shear stress in the shaft and the rotation of C, D and B. The steel shaft is solid 40 mm diameter with G = 75 GPa. Ans: 0c = 0.0048 rad e 300 N-m 500 N-m 200 N-m 400 N-m 300 mm B. 400 mm 500 mm

Treat A as a support wall and determine the Maximum shear stress in the shaft and the rotation of C, D and B. The steel shaft is solid 40 mm diameter with G = 75 GPa. Ans: 0c = 0.0048 rad e 300 N-m 500 N-m 200 N-m 400 N-m 300 mm B. 400 mm 500 mm

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.3.12P: A propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable...

See similar textbooks

Related questions

Q: ACB is a solid 0.05 m diameter shaft fixed supported at A and B and loaded at Cas shown. Determine…

Q: A mild steel shaft transmits 22 kW at 550 r.p.m. It carries a central load of 900N and is simply…

A: Given Data Power, P=22KW Shaft rpm, N=550 rpm Load, P=900N Length of the beam, L=2.5m Allowable…

Q: The copper pipe [G = 7,000 ksi] has an outside diameter of 3.875 in. and a wall thickness of 0.250…

Q: 10. Aline shaft is to transmit 30 kW at 160 r.p.m. It is driven by a motor placed directly under it…

Q: A propeller shaft is required to transmit 45 kW power at 500 rpm. It is a hollow shaft having inside…

A: Given data Power transmitted = 45 kW Speed (N) = 500 rpm Inside dia (d) = 0.6*outside dia(D)…

Q: The A-36 hollow steel shaft is 2 m long and has an outer diameter of 40 mm. When it is rotating at…

A: Given, L=2m Do=40mm=0.04 m ro=20mm = 0.02 m Shear Stress= 140 MPa ω= 80 rad/s

Q: A hollow cylindrical shaft has an internal diameter of 100 mm, an external diameter of 130 mm and is…

A: As per the given data in the question, the given answer is not correct. Please find the attached…

Q: The copper shaft is hollow from A to B and the steel shaft is solid from B to C. The shaft has an…

A: Given that, Outer diameter of shaft, Do=100 mm,Thickness of shaft, t=20 mm,Modulus of rigidty of…

Q: The propellers of a ship are connected to an A-36 steel shaft that is 60 m long and has an outer…

A: Torque is written as, Polar moment of inertia of shaft is written as,

Q: The propellers of a ship are connected to an A-36 steel shaft that is 60 m long and has an outer…

Q: The stainless-steel shaft shown below is solid with a diameter of 120 mm. The shaft is fixed at A…

A: Given:DIameter, d=120 mmTB=500 N.mTC=800 N.mG=75 GPa

Q: A solid circular shaft of diameter 100 mm is subjected to an axial stress of 50 MPa. It is further…

A: Data given- d = 100 mm σaxial = 50 MPa T = 10 kN-m

Q: The drive shaft AB of an automobile is to be designed as a thin- walled tube The engine delivers 150…

A: The power delivers by engine, P = 150 hp The speed of the shaft, N = 1500 rpm The outer diameter of…

Q: A hollow aluminum shaft with an outside diameter of 80 mm and a wall thickness of 5 mm has an…

Q: 1) Reqd: Determine Maximum Shearing Stresses for the 3 segments and 0at C (2)Solid 60-mm-diameter G…

Q: (a) the maximum shear stress in the shaft; and (b) the angle of twist in degrees. Use G =12 x 106…

Q: Solve Prob. using the maximum shear stress theory.

A: Given data: Stress in horizontal direction is σx = 20 ksi. Stress in vertical direction is σy = -12…

Q: (Q1 A hollow shaft has to transmit 6 MW at 150 rev/min. The maximum allowabl て 180 L=1 stress is not…

Q: The steel hollow shaft is rigidly attached to a solid bronze shaft by a bolt coupling. A maximum…

Q: A B E F 20 kN-m 35 kN-m 85 kN-m 30 kN-n

A: given d=0.2m = 200mm so r = 100mm

Q: QUESTION The shaft consists of solid 160 mm diameter rod segment PQ and RS, and the tubular segment…

A: To find: The maximum allowable torque T can be applied to the shaft. Given: The inner diameter of…

Q: 78. A motor driving a soiid circular steel shaft transmits 40 kW of power at 500 rpm. If the…

A: Given, Power transmitted by shaft = P = 40 kW = 40000 W Rotational speed of shaft = N = 500 rpm…

Q: 2. A composite shaft is subjected to two torques as shown below. Shaft AB is a solid aluminum (G =…

A: Given, Section AB:GAB = 25 GPa = 25000 N/mm2LAB = 400 mmTAB = 800 Nm = 800,000 NmmdAB = 36 mmJAB =…

Q: A hollow shaft for a rotary compressor is to be designed to transmit a maximum torque of 4750 N-m.…

A: Given data: Maximum torque, T = 4750 N·m. Shear stress in the shaft, τ = 50 MPa. The ratio of…

Q: 321. A compound shaft consisting of an aluminum segment and * steel segment is acted upon by two…

Q: 1) Reqd: Determine Maximum Shearing Stresses for the 3 segments and eat C (2)Solid 60-mm-diameter G=…

Q: SS 304 steel shaft is 3 m long and has an outer diameter of 60 mm. When it is rotating at 60 rad/s,…

Q: a. b. for which G=27GPa, Determine the maximum shear stress and its location. Angle of twist at end…

Q: A compound shaft consists of two pipe segments. Segment (1) has an outside diameter of 12.25 in. and…

Q: Problem #1: The steel shaft is made of two segments, AC has a diameter of 12 mm and CB has a…

A: Given data: dAC=12 mmdCB=25 mmT=750 N.mG=75 GPa Need to determine the maximum shear stress.

Q: 1) A solid steel drive shaft is required to transmit 12 hp. The allowable shear stress for steel is…

Q: If the internal torque experienced by a hollow brass shaft (G = 39 GPa) at a section with diameter d…

Q: 324. A shaft composed of segments AC, CD, and DB is fastened to rigid supports and loaded as shown…

Q: The shaft consists of a titanium alloy tube AB and a solid stainless steel shaft BC. Tube AB has a…

Q: Determine the maximum torsion load, in N-m, that a 20 mm diameter aluminum shaft can carry if its…

Q: A rod is made from two segments: AB is steel and BC is brass. It is fixed at its ends and subjected…

Q: The steel shaft is made from two segments: AC has a diameter of 12 mm, and CB has a diameter of 25…

Q: Let's consider a solid circular shaft subjected to the torque loads as shown. Determine the minimum…

Q: Select the right value of the stress occurred on a hollow shaft when it is subjected to a twist of…

Q: If the internal torque experienced by a solid brass shaft (G =39 GPa) with radius r=50 mm is T = 12…

A: Consider a twisting moment T is applied to a shaft having radius R. Then, torsional shear stress…

Q: A hollow shaft for a rotary compressor is to be designed to transmit a maximum torque of 4750 N-m…

A: Given data Maximum torque (T) = 4750 N-m limited shear stress (τ) = 50 MPa Inside dia to outside…

Q: Problem 2

Q: is the polar modulus value for a solid shaft of diameter 8 cm. Select one: -6 O a. 4.02 x 10 O b. 1…

A: We have to find polor modulus

Q: TUEMS 4 Let's consider a solid circular shaft subjected to the torque loads as showns Determine the…

A: Calculated the minimum required diameter of the shaft in mm.

Q: Q2: A rotating steel shaft shown: carried by bearings A and E. Machined surface, Sut = 500 MPa,…

Q: Determine the maximum shearing stress in segments AB, BC and CD of hollow shaft shown in Fig. 400N.m…

Q: Two loads P act as shown, one parallel to (x0) and another parallel to z0; each load P equals 1.5…

A: Given: The value of the load is, P=1.5 kN. The diameter of the shaft is, d=22 mm

Q: Q3-C- The 304 stainless steel shaft with modulus of rigidity 75 GPa and 3 m long has an outer…

A: Calculated the smallest thickness of shaft.

Question

Treat A as a support wall and determine the Maximum shear stress in the shaft and the rotation of C, D and B.
The steel shaft is solid 40 mm diameter with G = 75 GPa. Ans: oc = 0.0048 radYe
%3D
300 N.m
500 N-m
A
200 N-m
400 N-m
300 mm
400 mm
500 mm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1 Given data

VIEW

Step 2 Calculate rotation at point C,D,and B

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

The shear stresses t in a rectangular beam arc given by Eq. (5-43): in which Fis the shear force, / is the moment of inertia of the cross-sectional area, /lis the height of the beam, and i] is the distance from the neutral axis to the point where the shear stress is being determined (Fig. 5-32). By integrating over the cross-sectional area, show that the resultant of the shear stresses is equal to the shear force V.
A thin-walled rectangular tube has uniform thickness t and dimensions a x b to the median line of the cross section (see figure). How does the shear stress in the tube vary with the ratio = a/b if the total length Lmof the median line of the cross section and the torque T remain constant? From your results, show that the shear stress is smallest when the tube is square (ß = 1).
A circular pole is subjected to linearly varying distributed force with maximum intensity t0. Calculate the diameter daof the pole if the maximum allowable shear stress for the pole is 75 M Pa.
A propeller shaft for a small yacht is made of a solid steel bar 104 mm in diameter. The allowable stress in shear is 48 MPa, and the allowable rate of twist is 2.0° in 3.5 meters. (a) Assuming that the shear modulus of elasticity is G = 80 GPa, determine the maximum torque that can be applied to the shaft. (b) Repeat part (a) if the shaft is now hollow with an inner diameter of 5d18. Compare values to corresponding values from part (a).
The propellers of a ship are connected to an A-36 steel shaft that is 60 m long and has an outer diameter of 340 mm and inner diameter of 260 mm. If the power output is 4.5 MW when the shaft rotates at 20 rad/s, determine themaximum torsional stress in the shaft and its angle of twist.
The A-36 hollow steel shaft is 2 m long and has an outer diameter of 40 mm. When it is rotating at 80 rad>s, it transmits 32 kW of power from the engine E to the generator G. Determine the smallest thickness of the shaft if the allowable shear stress is tallow = 140 MPa and the shaft is restricted not to twist more than 0.05 rad.
The copper pipe [G = 7,000 ksi] has an outside diameter of 3.875 in. and a wall thickness of 0.250 in. The pipe is subjected to a uniformly distributed torque of t = 80 lb-ft/ft along its entire length. Using a = 2.5 ft, b = 4.0 ft, and c = 8.5 ft, determine(a) the maximum shear stress in the pipe.(b) the rotation angle φC at the free end of the shaft.
The shaft assembly is made from a steel tube 1 in. in diameter, which is bonded to a solid brass core 0.5 in. in diameter. If a torque of 250 lb-ft is applied at its end, determine the maximum shear stress in psi experienced by the assembly. Take G for steel at 11.4x103 ksi and G brass at 5.2 x 103 ksi. complete soln.
The propellers of a ship are connected to an A-36 steel shaft that is 60 m long and has an outer diameter of 340 mm and inner diameter of 260 mm. If the power output is 4.5 MW when the shaft rotates at 20 rad>s, determine the maximum torsional stress in the shaft and its angle of twist.
The solid 35-mm-diameter shaft is used to transmit the torques applied to the gears. The shaft is made of steel A-36 with E = 200 GPa and G = 75 GPa a. Determine the absolute maximum shear stress on the shaft. b. Determine the angle of twist of the end B with respect to end A. c. The shaft is now change d to a hollowed shaft with an outside diameter of 40 mm. What inner diameter is required to resist the same torque with the same maximum shear stress?
The shaft consists of three concentric tubes, each made from the same material and having inner and outer radii as given below. Length of shaft is 2m. One end is fixed to the wall and to the other end a disc is attached. If a torque of T =800 N.m is applied at the disc end, determine the maximum shear stress in the shaft. 1. Inner tube: r; = 20mm, r, = 25 mm 2. Center tube: r; = 26 mm, r. = 30 mm 3. Outer tube: r = 32mm, r, = 38mm
The A-36 steel tubular shaft is 2 m long and has an outer diameter of 50 mm. When it is rotating at 40 rad>s, it transmits 25 kW of power from the motor M to the pump P. Determine the smallest thickness of the tube if the allowable shear stress is tallow = 80 MPa.