The copper shaft is hollow from A to B and the steel shaft is solid from B to C. The shaft has an outer diameter of 100 mm, and the thickness of the wall of the hollow segment is 20 mm. take Gst = 100 GPa. & Gcopp. = 60 GPa. The angel of twist of B is %3D steel 8 KN.m Copper 5 KN.m 3 m

The copper shaft is hollow from A to B and the steel shaft is solid from B to C. The shaft has an outer diameter of 100 mm, and the thickness of the wall of the hollow segment is 20 mm. take Gst = 100 GPa. & Gcopp. = 60 GPa. The angel of twist of B is %3D steel 8 KN.m Copper 5 KN.m 3 m

Mechanics of Materials (MindTap Course List)

9th Edition

ISBN:9781337093347

Author:Barry J. Goodno, James M. Gere

Publisher:Barry J. Goodno, James M. Gere

Chapter3: Torsion

Section: Chapter Questions

Problem 3.7.10P: What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm,...

See similar textbooks

Related questions

Q: A circular solid shaft made of vibranium has G=80 MPa and has a limiting torsional shear stress of…

Q: 4. The tapered shaft is made from E- 36 steel ( G = 80 GPa ), and has a radius which can be…

A: Given Length, L = 4 m Torque, T = 450 Nm G = 80 GPa Find Angle of twist

Q: 10. Aline shaft is to transmit 30 kW at 160 r.p.m. It is driven by a motor placed directly under it…

Q: 3.31 A hollow steel shaft, 6 ft long, has an outer diameter of 3 in. and an i diameter of 1.5 in.…

Q: A hollow bronze shaft (G=5000ksi) has an outer diameter of 3in and a wall thickness of 0.25in. The…

A: Given data: Converting all data into SI units. Modulus of rigidity G=5000 ksi=34473.8 Mpa Outer…

Q: . Use G 11.2 X 10° psi. (b) Solve part a, assuming that the 1 shaft is hollow with a 1.5-in. outer…

A: given:

Q: The solid shaft (G=70 GPa) has a diameter of 40 mm. Calculate: a. The magnitude and direction of the…

Q: In a flange coupling as shown each shaft is keyed to the both of a flange with a sunk key to…

Q: A compound steel [G = 80 GPa] shaft consists of solid 30-mm-diameter segments (1) and (3) and tube…

A: Given data:

Q: 4. The tapered shaft is made from E- 36 steel (G = 80 GPa ), and has a radius which can be described…

A: Given Torque, T = 450 Nm Length, L = 4 m Find Angle of the twist

Q: Torsion A hollow circular shaft has inside and outside diameters of 30 mm and 40 mm respectively.…

Q: A solid steel circular shaft transmits 18 kW of power at 120 rpm. Determine the minimum diameter of…

Q: 5 - Shaft ABC is fixed at both ends. Segment AB is solid core and segment BC is hollow-core, with…

A: Given:LAB=0.4 mLBC=0.5 mDAB=40 mmDBC=60 mmdBC=30 mmGAB=28 GPaGBC=85 GPa

Q: The compound shaft made from the same material consisting of two segments AC and CB is firmly…

Q: A solid shaft of circular cross section has a diameter of 15mm and is loaded by a torque of 130Nm at…

Q: A circular solid shaft made of vibranium has G=80 MPa and has a limiting torsional shear stress of…

Q: A steel shaft is to be manufactured either as a solid circular or as circular tube. The shaft is…

A: Given Data, :-∗Torque,T=1200N⋅m∗Allowable shear stress, ζall=40MPa∗θallowable=∅L=0.75°/m* Shear…

Q: Two motors deliver 119 hp each at 1000 rpm to shafts at A and D. The shaft transmits torque through…

A: Data given- Motor deliver = 119 hp N = 1000 rpm Shear modulus = 11 × 103 ksi

Q: Q2. A solid circular shaft is subjected to a bending moment of 2500 N-m and a torque of 7 000 N-m.…

A: We will calculate diameter of shaft considering two types of failure: Maximum principal stress…

Q: Problem # 6: The compound shaft is firmly attached to rigid support A. It consists of hollow brass…

A: Let τBr=shear stress developed in the brass J=Polar moment of inertia= π(D4-d4)/32 = 122.01in4 T=…

Q: A solid steel shaft ABCDE turns freely in bearings at points A and E. The shaft is driven by the…

Q: The torque of 100 kip - ft is applied in the 16-ft-long hollow steel shaft. Note that the inner…

Q: 3.15 The tapered, wrought iron shaft carries the torque T 2000 lb in. at its free end. Determine the…

Q: circular solid shaft made of vibranium has G=80 Mpa and has a limiting torsional shear stress of 60…

Q: A solid steel shaft ABCDE turns freely in bearings at points A and E. The shaft is driven by the…

Q: A shaft is required to transmit 285 kW power at 255 r.p.m. The maximum torque may be 1.8 times the…

Q: shear

Q: T 100 mm 70 mm 70 mm y T

Q: The two solid shafts are connected by the gears shown. The motor constantly supplies 20 kW of power…

Q: 2. A composite shaft is subjected to two torques as shown below. Shaft AB is a solid aluminum (G =…

A: Given, Section AB:GAB = 25 GPa = 25000 N/mm2LAB = 400 mmTAB = 800 Nm = 800,000 NmmdAB = 36 mmJAB =…

Q: QUESTION 2: 2.1 A shaft is to transmit 190 kW at 180 rev/min. If the maximum torque transmitted is…

Q: The allowable shear stress in the shaft is 70 MPa and the allowable angle of twist of end A relative…

A: Given: Allowable shear stress (τallowable)=70MPaAllowable angle of twist (φA/D)=0.01radShear modulus…

Q: Select the size of a hollow steel shaft necessary to transmit 150 hp at 250 rpm without exceeding an…

A: Given data, Power=150hp speed=250 rpm shear stress=4.7ksi angle of twist =0.35°…

Q: a. b. for which G=27GPa, Determine the maximum shear stress and its location. Angle of twist at end…

Q: Q5: Determine the diameter of the solid shaft where the angle of twist not exceed 10 and the length…

A: Given: The angle of the twist: →θ=1°=1×π180=0.017 radian Diameter of the shaft=d And length of the…

Q: The composite shaft assembly shown is composed of a bronze (G = 38 GPa) hollow shaft perfectly…

A: Note: Dear Student! As per our guidelines, we are only allowed to answer three sub-parts of a…

Q: 3.8 The steel shaft is formed by attaching a hollow shaft to a solid shaft. Determine the maximum…

Q: Determine the maximum torque that can be applied to a hollow circular steel shaft of 100mm outer…

Q: A solid circular shaft of steel is transmitting 20 kW of power at 120 rpm. Determine the minimum…

Q: The shaft (G = 80 GPa) has a diameter of 14 mm, determine the angle of twist at B. Also draw free…

Q: Determine the diameter of a solid steel shaft which will transmit 112.5 kW at 200 rpm. Also…

A: Given data, P= 112.5 kW =112500 W N= 200 rpm. θ=1.5° =0.0261799 rad. τ=55 N/mm² =55000000 N/m²…

Q: Under normal operating conditions, the electric motor exerts a torque of 2.4 kN-m at A. Knowing that…

A: To find out the maximum shear stress at AB τAB=TcJ where c=d/2 J=πd464 d=54mm =0.054m…

Q: TUEMS 4 Let's consider a solid circular shaft subjected to the torque loads as showns Determine the…

A: Calculated the minimum required diameter of the shaft in mm.

Q: Detailed solution would be appreciated thanks!!. The steel shaft is formed by attaching a hollow…

Q: shaft is made of a materia odulus G = 50 GPa, so tha angle of twist at its end w .011° (calculated…

A: Given data G = 50GPa angle of twist = 0.011 required Shaft diameter D?

Q: 03: A shaft carry ing three loaded pulleys with stepped diameters as shown. The modulus of rigidity…

Concept explainers

Combined Loading

Any functioning component, such as machine parts, structural members, pressure vessels, and so on, are all under the influence of more than one force. When anybody is under the influence of more than one force such as shear forces, bending moments, axial forces, torsion, and so on, then such body is said to be under combined loading. A very practical example of combined loading is the crankshaft of an internal combustion engine (IC engine). The crankshaft of the IC engine is under high rpm, which is caused due to the torsional forces. Due to the presence of piston, counterbalances, and internal imbalances, the crankshaft experiences lateral forces and due to the rise in temperature, the crankshaft undergoes thermal expansion, which pulls the crankshaft along the axial direction and lateral direction. The presence of unbalanced loads along the periphery of the crankshaft also induces a bending moment.

Question

The copper shaft is hollow from A to B and the steel shaft is solid from B to C. The shaft has an outer
diameter of 100 mm, and the thickness of the wall of the hollow segment is 20 mm, take Gst = 100
GPa. & Gcopp. = 60 GPa. The angel of twist of B is
%3D
steel
8 KN.m
Copper
5 KN.m
3 m
a.
0.076 Rad
b.
0.053 Rad
C. 0.0292 Rad
d.
0.0175 Rad

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Step by step

Solved in 2 steps with 1 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, mechanical-engineering and related others by exploring similar questions and additional content below.

Similar questions

Repeat Problem 11.2-3 assuming that R= 10 kN · m/rad and L = 2 m.
What is the maximum power that can be delivered by a hollow propeller shaft (outside diameter 50 mm, inside diameter 40 mm, and shear modulus of elasticity 80 GPa) turning at 600 rpm if the allowable shear stress is 100 MPa and the allowable rate of twist is 3.0°/m?
A circular solid shaft made of vibranium has G=80 Mpa and has a limiting torsional shear stress of 60 Mpa. Allowable angle of twist is 0.03 rad. Determine the minimum required diameter if T1=10kN-m and T2=25kN-m. Answer in mm.
A hollow bronze shaft (G=5000ksi) has an outer diameter of 3in and a wall thickness of 0.25in. The permitable shear stress in the shaft is 9ksi and the angle of twist must be 0.035rad. Find: a- The max horsepower that can be transmitted by the shaft if the rotation speed is 130 rpm b - The max horsepower that can be transmitted by the shaft if the rotation speed is raised to 510rpm
A turbine shaft transmits 500 kW power at 900 rpm. The permissible shear stress is 80N/mm² while twist is limited to 0.5º in a length of 2.5 m. Take G = 0.8x10⁵ N/mm², on thebasis of torsional rigidity;i.Determine diameter of shaft if solid shaft is used.ii.If hollow shaft is chosen with di/do = 0.6, determine the suitable diameters of theshaft. please write with ball pen.. thank you
Torsion A hollow circular shaft has inside and outside diameters of 30 mm and 40 mm respectively. The material has-a shear modulus of 60 kN/mm'. Determine the maximum stress in the shaft when it is subjected to a twist of 5 in a length of 2.5 m. What is the maximum torque the shaft can carry? For a circle / = nd*/32.
A solid circular shaft has a diameter of d mm and is made from steel, which fail when tested in simple tension test at a stress of 150 MPa. The shaft was subjected by bending moment and torque which are 22.2 kNm and 44.4 kNm respectively. Calculate the minimum allowable shaft diameter, d according to:- (a) Tresca failure criterion (b) Von Mises theory of elastic failure
A tubular steel [G = 79 GPa] shaft with an outside diameter of D = 89 mm and a wall thickness of t = 4 mm must not twist more than 0.071 rad in a 5.4-m length. Determine the maximum power P that the shaft can transmit at 310 rpm.
A hollow steel shaft, 6 ft long, has an outer diameter of 3 in. and an inner dieter of 1.5 in. The shaft is transmitting 200 hp at 120 rev/min. Determine (a) themaximum shear stress in the shaft; and (b) the angle of twist in degrees. Use G =12 x 106 psi for steel. complete solution
A hollow steel shaft, 6 ft long, has an outer diameter of 3 in. and an inner diameter of 1.5 in. The shaft is transmitting 200 hp at 120 rev/min. Determine (a) themaximum shear stress in the shaft; and (b) the angle of twist in degrees. Use G =12 x 106 psi for steel
A drive shaft running at 2500 rpm has outer diameter of 60mm and innerdiameter of 40mm. The allowable shear stress in the shaft is 35MPa. Determine themaximum power that can be applied. Present drawings/FBD’s illustrating your solution.
Detailed solution would be appreciated thanks!!. The steel shaft is formed by attaching a hollow shaft to a solid shaft. Determine the shear stress (in Pa) in the hollow shaft using the maximum torque T that can be applied to the ends of the shaft without exceeding a shear stress of 70092104 Pa and angle of twist of 2.25ᴼ for the whole shaft. Use G = 83000000000 Pafor the shaft, x = 2.43 m, and y = 1.89 m. Round off the final answer to two decimal places.