Two 150 MVA synchronous generators, 20 kV three-phase star-connected which has a armor resistance of 0.04ohm/phase and a synchronous reactance of 1.2 ohm/phase. They feed at a load of 225 MVA late power factor of 0.82. Each generator has a winding in the stator with 144 8-pole slots winding in double layer and each distributed winding has 20 coils, this dented with step fraction of 7/8 where the flow per pole is 5.23x10^6 lines and the rotor speed is 900 r/min. Determine a) determine the winding factors kp, Kd b) total number of laps per phase c) phase voltage d) voltage between phases. (e) the voltage generated for each generator if it distributes equal loads. ) If the machine is asked to reduce the actual power by 13% by need of operation and increase the reactive power by 18% determine the actual and reactive power of each machine and its power factor. g) Calculate the torque angle of cach generator h) Calculate the voltage generated under these conditions. i) Plot the vector diagram of cach generator.

Two 150 MVA synchronous generators, 20 kV three-phase star-connected which has a armor resistance of 0.04ohm/phase and a synchronous reactance of 1.2 ohm/phase. They feed at a load of 225 MVA late power factor of 0.82. Each generator has a winding in the stator with 144 8-pole slots winding in double layer and each distributed winding has 20 coils, this dented with step fraction of 7/8 where the flow per pole is 5.23x10^6 lines and the rotor speed is 900 r/min. Determine a) determine the winding factors kp, Kd b) total number of laps per phase c) phase voltage d) voltage between phases. (e) the voltage generated for each generator if it distributes equal loads. ) If the machine is asked to reduce the actual power by 13% by need of operation and increase the reactive power by 18% determine the actual and reactive power of each machine and its power factor. g) Calculate the torque angle of cach generator h) Calculate the voltage generated under these conditions. i) Plot the vector diagram of cach generator.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.16P: A single-phase, 120V(rms),60Hz source supplies power to a series R-L circuit consisting of R=10 and...

See similar textbooks

Similar questions

A single-phase, 120V(rms),60Hz source supplies power to a series R-L circuit consisting of R=10 and L=40mH. (a) Determine the power factor of the circuit and state whether it is lagging or leading. (b) Determine the real and reactive power absorbed by the load. (c) Calculate the peak magnetic energy Wint stored in the inductor by using the expression Wint=L(Irms)2 and check whether the reactive power Q=Wint is satisfied. (Note: The instantaneous magnetic energy storage fluctuates between zero and the peak energy. This energy must be sent twice each cycle to the load from the source by means of reactive power flows.)
A synchronous generator runs at 250 rpm and generates at 50-Hz. There are 216 slots, each containing 5 conductors arranged in a full-pitched winding for 3-phase star connection. All the conductors of each phase are in series and the flux per pole at no-load sinusoidally distributed over the pole pitch is 30 mWb. Find the emf induced in each phase winding and the terminal voltage.
A generating station for a power system consists of five 122 MVA 15-kV 0.85-PF-lagging synchronous generators with identical speed droop characteristics operating in parallel. The governors on the generators’ prime movers are adjusted to produce a 2.5-Hz drop from no load to full load. four of these generators are each supplying a steady 72 MW at a frequency of 60 Hz, while the fifth generator (called the swing generator) handles all incremental load changes on the system while maintaining the system's frequency at 60 Hz. At a given instant, the total system loads are 500 MW at a frequency of 60 Hz. Compute the no-load frequencies of each of the system’s generators? If the system load rises to 600 MW and the generator’s governor set points do not change, compute the new system frequency be? To what frequency must the no-load frequency of the swing generator be adjusted in order to restore the system frequency to 60 Hz? If the system is operating at the conditions described in part (c),…
A synchronous generator runs at 250 rpm and generates at 50-Hz. There are 216slots, each containing 5 conductors arranged in a full-pitched winding for 3-phasestar connection. All the conductors of each phase are in series and the flux perpole at no-load sinusoidally distributed over the pole pitch is 30 mWb. Find the emfinduced in each phase winding and the terminal voltage.
A generating station forq a power system consists of five 189-MVA 15-kV 0.85-PF-lagging synchronous generators with identical speed droop characteristics operating in parallel. The governors on the generators’ prime movers are adjusted to produce a 2.5-Hz drop from no load to full load. four of these generators are each supplying a steady 139 MW at a frequency of 60 Hz, while the fifth generator (called the swing generator) handles all incremental load changes on the system while maintaining the system's frequency at 60 Hz. 1)At a given instant, the total system loads are 500 MW at a frequency of 60 Hz. Compute the no-load frequencies of each of the system’s generators? 2)If the system load rises to 600 MW and the generator’s governor set points do not change, compute the new system frequency be? 3)To what frequency must the no-load frequency of the swing generator be adjusted in order to restore the system frequency to 60 Hz? 4)If the system is operating at the conditions described…
Two identical, 3-phase, Y-connected alternators A and B share equally a load of 10MW at 33kV at 0.8pf lagging. The synchronous reactance of each machine is 4 ohms per phase and the armature resistance is negligible. Alternator A has its field excitation adjusted to carry 125A lagging current. What is the current supplied by alternator B?
A single-phase synchronous generator has a rated output of 500 kVA at a terminal voltage of 3300 V. The stator winding has a resistance of 0.6 ohms and a synchronous reactance of 4.0ohms. Calculate the percentage voltage regulation at a power factor of 0.8 lagging. Sketch the phasor diagram.
A 4MVA, 13.3 kV, 60 Hz, 3 phase, delta connected alternator has aneffective resistance of 5.2 ohm per phase and a combined armaturereactance of 54 ohm per phase. Determine the full load generatedvoltage per phase :a) At unity power factorb) At 0.8 power factor leadingc) At 0. 866 at power factor lagging Whole Solution
two synchronous generators are connected in parallel, feeding a load together. the frequency of the first generator in the no-load State is 52 Hz and the slope of the characteristic is 1 MW/Hz. the total power of the load fed by these two generators is 2.5 MW and the power coefficient is 0.6 inductive. by drawing the characteristic curve of the system;a) what is the frequency of the system when the load in question is fed, and how do the two generators share the load between themselvesb) if a load of 0.5 MW is added to the system, find the operating frequency of the new system and the powers given by each generatorc) if a second load of 0.5 MW is connected to the system, the idle operating frequency of the second generator is increased by 0.5 Hz, what happens to the operating frequency of the system and the power values given by the generators
A shunt generator has a no load terminal voltage of 270V and a voltage of 240V when it delivers 180A. Determine the voltage when the load current is 120A
i. A 2300 V, With 2500 kVA three phase delta-connected alternator has a resistance of 0.1ohm/phase and a synchronous reactance of 1.5 ohms/phase. The alternator is adjustedto rated voltage at no load. Calculate its terminal voltage when carrying ratedcurrent at no load power factor of 0.6 lagging.
A single phase AC generator winding has an effective resistance of 0.2 ohm and synchronous reactance of 2.2 ohms. Find the generated emf when the load is 50A at a terminal voltage of 500 V at pf 0.8 leading.