Two star-connected, cylindrical rotor synchronous generators of identical rating operate in parallel to supply a load of 50 MW at 11∠0° ??V with 0.8 power-factor lagging. The internal e.m.f (line-to-line) of generator A is 15∠??A kV and the machine delivers 30 MW, the remaining power being supplied by generator B. The synchronous reactance for each machine is 1.92 Ω. Neglecting all losses, determine the internal line voltage of generator B plus its load angle.

Two star-connected, cylindrical rotor synchronous generators of identical rating operate in parallel to supply a load of 50 MW at 11∠0° ??V with 0.8 power-factor lagging. The internal e.m.f (line-to-line) of generator A is 15∠??A kV and the machine delivers 30 MW, the remaining power being supplied by generator B. The synchronous reactance for each machine is 1.92 Ω. Neglecting all losses, determine the internal line voltage of generator B plus its load angle.

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter11: Transient Stability

Section: Chapter Questions

Problem 11.8P

See similar textbooks

Similar questions

A power plant comprises three turbine-generators rated 1000 MW, 800 MW and 500 MW respectively. The regulation constant of each generator is 0.05 pu based on its own rating. Each unit is initially operating at one-half of its own rating, when the system load suddenly increases by 300 MW. Calculate the following:a) Per-unit area frequency response characteristic on a 1000 MW system base.b) Steady-state drop in area frequency [CR4]c) The share of the load increase on each generator.d) Total load on each generator after the increase in system load.Assume the reference power setting of each turbine is unchanged.
QUESTION 1:- (a) A 4-pole, 3-phase, star-connected, 50 Hz synchronous generator, with a synchronous impedance of j24.5 Ω/phase and negligible resistance, delivers 5 MW of power to a 13.8 kV busbar. At this operating point, the excitation is equal to 1.8 p.u. Calculate the phase value of the generated emf (E) and hence calculate the electrical load angle, δ, at which the machine is operating. (b) Sketch a typical operating chart for a salient pole synchronous generator and on the chart identify the following; The Apparent Power limit, The field (excitation) limit, The Real Power limit, A line which represents a constant lagging power factor, The rotor angle for operation at any given point of operation, e.g. rated power and 0.9 power factor lag. (c) A Stamford HCI534F framesize generator has been selected for a stand-alone diesel-generation application. The generator is to operate at 400 V, 50 Hz, with the self-excited (SX) excitation scheme. Datasheet information can be…
A power plant comprises three turbine-generators rated 1000 MW, 800 MW and 600 MW respectively. The regulation constant of each generator is 0.05 pu based on its own rating. Each unit is initially operating at one-half of its own rating, when the system load suddenly increases by 250 MW. Calculate the following:a) Per-unit area frequency response characteristic on a 1000 MW system base [CR9]b) Steady-state drop in area frequency [CR4]c) The share of the load increase on each generator [CR9]d) Total load on each generator after the increase in system load [CR3]Assume the reference power setting of each turbine is unchanged.
A 2-pole, 50 Hz, 11 kV synchronous generator with a rating of 120 MW and 0.87 lagging power factor has a moment of inertia of 12,000 kg- . Calculate the constants H and M A 4-pole synchronous generator supplies over a short line a load of 60 MW to a load bus. If the maximum steady state capacity of the transmission line is 110 MW, determine the maximum sudden increase in the load that can be tolerated by the system without losing stability
electrical machines 3. 400 V 50 Hz, Y-connected, 6-pole synchronous generator per phase synchronous reactance 1.0 Ω at back power factor of 0.9 full load armature current 50 A, friction and wind losses 1.25 kW and core losses at 50Hz full load 1.0 kW and armature resistance and loss are neglected. The excitation current is adjusted so that the no-load output voltage is 400V. According to this; a) Calculate the rotation speed of the generator. b) find the terminal voltages at load with rated current at 0.8 back power factor and unit power factor . c) Calculate the voltage regulation of the generator for power coefficients of 0.8 back and 1.0.
A three-phase synchronous generator is rated 60 MVA, 11 kV. It has an armature resistance ra = 0.1 pu and synchronous reactance xS = 1.65 pu. It is feeding into an inﬁnite bus at 11 kV delivering a current 15 kA at 0.9 power factor lagging. (a) Determine internal voltage (E) and power angle (δ). (b)Draw a vector diagram for this operation and state operating mode of the generator.(c) Infinite bus voltage falls to 10 kV while the mechanical power input to generator and itsexcitation remains unchanged. What is the value of the current, power factor and reactivepower delivered to the infinite bus.Per-unit values are given on machine rating as the base.
Calculate for full-load and unity p.f., the natural period of oscillation of a 50-Hz, 10,000-kVA, 11-kV alternator driven at 1500 r.p.m. and connected to an infinite bus-bar. The steady short-circuit current is four times the full-load current and the moment of inertia of the rotating mass is 17,000 kg-m2. ANSWER IS [1.148 second]
The synchronous reactance of the direct-axis and quadrature-axis of a three-phase,40-pole, 50 Hz, 13,8 kV, salient-pole synchronous generator is 2,38 Ω and 1,33 Ωrespectively. The resistance of the star-connected stator is negligible. The load angle ofthe machine is 30°e and the excitation is set to induce an emf of 167%. Sketch the phasordiagram and calculate:(a) current(b) power(c) reluctance torque(d) the maximum load angle(e) the maximum power developed
A 3-phase, Y connected, round rotor synchronous generator rated at 12kVA, 240V has a Synchronous reactance of 1.2Ω per phase and an armature resistance of 0.6Ω per phase. Calculate: i) The generated phase voltage at full load and 0.8 lagging power factor. ii) The percentage voltage regulation at full-load with 0.8 lagging power factor. iii) The generated phase voltage at full load and 0.8 leading power factor. iv) The percentage voltage regulation at full-load with 0.8 leading power factor.
A 45-MVA, 41.57-kV, three-phase round-rotor synchronous generator has a synchronous reactance of 9 ohm per phase and negligible armature resistance. It supplies a load which is connected to an infinite bus as shown in Fig. 1. 1) Determine the magnitude of the generated emf per phase and the power angle δ when the generator is supplying a 28-MW load at 0.76 power factor lagging at 95% of the rated terminal voltage. 2) Draw a phasor diagram showing the magnitude and relationship between the generated emf, the generator terminal voltage and the armature current for the operating condition in Part 1. 3) The generator is delivering 22 MW to the bus bar at 95% of the rated voltage with its field current adjusted for a generated emf of 25 kV per phase. Find the voltage regulation, the armature current, and the power factor for this operating condition.
A short shunt compound generator supplies a load of 10 kW at 200 V through a pair of feeder and series field resistance 0.10 ohm. Armature resistance, shunt field resistance and series field resistance are 0.01 ohm, 52.2 ohms and 0.10 ohm, respectively. If the core friction and windage losses amount to 631 watts, the BHP of the driving engine is nearest to
A 3 phase, 11 kV, 60 Hz, 25 MVA, Y-connected cylindrical-rotor synchronous machine generator has Ra =0.45 Ω per phase and Xs =4.5 Ω per phase. The generator delivers the rated load at 11 kV and 0.85 lagging power factor. Determine the excitation voltage, Ef, for this operating condition.