Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Label all significantpoints on each diagram and identify the maximum moments along with their respective locations.Additionally:(a) Determine V and M in the beam at a point located 1.50 m to the right of B.(b) Determine V and M in the beam at a point located 1.25 m to the left of D.Let a = 3.1 m, b = 5.9 m, w = 34 kN/m, P = 48 kN, Q = 34 kN, and Mc = 155 kN-m. Construct the shear-force andbending-moment diagramPwABEMcaaa Find the location x and the corresponding bending moment M at the one point between B and Dat which the shear force equalszero. Use the correct sign convention for the bending moment.Consider the entire beam and determine the maximum positive bending moment and the location at which it occurs. Use thebending moment sign convention.Consider the entire beam and determine the negative bending moment with the largest absolute value. Use the bendingmoment sign convention, so enter a negative value.

Answered: Image /qna-images/answer/1e3789a6-17bb-4b24-a292-54d7a60b8d02.jpg

Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Label all significant points on each diagram and identify the maximum moments along with their respective locations. Additionally: (a) Determine V and M in the beam at a point located 1.50 m to the right of B. (b) Determine V and M in the beam at a point located 1.25 m to the left of D. Let a = 3.1 m, b = 5.9 m, w = 34 kN/m, P = 48 kN, Q = 34 kN, and Mc = 155 kN-m. Construct the shear-force and bending-moment diagram P B Mc E a а a

Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Label all significant points on each diagram and identify the maximum moments along with their respective locations. Additionally: (a) Determine V and M in the beam at a point located 1.50 m to the right of B. (b) Determine V and M in the beam at a point located 1.25 m to the left of D. Let a = 3.1 m, b = 5.9 m, w = 34 kN/m, P = 48 kN, Q = 34 kN, and Mc = 155 kN-m. Construct the shear-force and bending-moment diagram P B Mc E a а a

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a = 2.2 m, b = 4.4 m, c = 3 m, P = 16 kN, w = 34 kN/m, and Q = 26 kN. Label all significant points on each diagram and identify the maximum shear force and bending moment along with their respective locations. Additionally:(a) Determine V and M in the beam at a point located 0.65 m to the right of B.(b) Determine V and M in the beam at a point located 1.40 m to the left of C.Note that answers may be positive or negative. Here, "maximum" refers to the largest magnitude value, but you should enter your shear force and bending moment with the correct sign, using the sign convention presented in Section 7.2 of the textbook. If the magnitudes of the largest positive and largest negative values are the same, enter a positive number.
Draw the shear force and bending moment diagram for the loaded simply supported beam as shown below. Also, mark all salient points of shear force and bending moment values in the diagram with proper units. where F1=50 N, F2=50 N, F3=40 N/m, X1=4 m, X2=4 m, X3=4 m, X4=3 m, X5=4 m
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=11 ft, b=6 ft and w = 12 kips/ft.Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) Use the graphical method to determine the bending moment acting at each of the following locations:(a) x = 8.2 ft(b) x = 11 ft(c) x = 13.6 ftWhen entering your answers, use the bending moment sign convention.Answers:(a) M = kip-ft.(b) M = kip-ft.(c) M = kip-ft.
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let w = 4.0 kips/ft, a= 6.5 ft, and b= 17.5 ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise.
For the beam and loading shown, write the equations for the internal shear force V and bending moment M as a function of x and then draw the shear and moment diagrams. Also, state the values of the internal shear force and bending moment at x = 1.4 m and x = 4.9 m. [Answer: At x = 1.4 m, V = 8.51 kN and M = -23.5 kN m and at x = 4.9 m, V = 2.93 kN and M = -2.77 kN m]
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let a=12.0 ft, b=6.5 ft, c= 7.0 ft, w = 7 kips/ft and M = 230 kip-ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise.Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) Determine the shear force acting at each of the following locations:(a) x = 0+ ft (i.e., just to the right of support A)(b) x = 12.0 ft (i,e., at point B)(c) x = 18.5- ft (i.e., just to the left of the support C)(d) x = 18.5+ ft (i.e., just to the right of the support (C)(e) x = 24.5 ftNote that x = 0 at support A. Determine the bending…
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=3.5 ft, b=9.0 ft, c=4.0 ft, d=3.5 ft, w = 5.5 kips/ft and P = 45 kips. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. For this loading, calculate the reaction forces Ay and Ey acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) Ay =___________ kips, Ey = __________ kips. Determine the shear force acting at each of the following locations:(a) x = 0+ ft (i.e., just to the right of support A)(b) x = 3.5 ft(c) x = 12.5 ft(d) x = 16.5– ft (i.e., just to the left of D)(e) x = 16.5+ ft (i.e., just to the right of D)(f) x = 20.0– ft (i.e., just to the left of support E) Answer: a to f ) V = ________ kips Use the graphical…
Please Help me to answer this... For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let a=6.5 ft, b=24.0 ft, P = 32 kips and w = 9.5 kips/ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise. Determine the bending moment acting at each of the following locations:(a) x = 6.5 ft (i.e., at point B)(b) x = 28.5 ftNote that x = 0 at support A. When entering your answers, use the bending-moment sign convention detailed in Section 7.2. Use your shear-force and bending-moment diagrams to determine the maximum bending moment, Mmax, and its location, xmax. Use the bending-moment sign convention detailed in Section 7.2.Answers:
Determine the bending moment M in the beam at the point located 0.44 m to the right of point B. The ground reactions and shear-force diagram are shown.
Using singularity functions, determine the expressions of V (cutting force) and M (deflector moment) on each stretch of the beam schematized below and construct the diagrams of cutting force and deflector moment. Take the z-axis starting with point A and heading toward B. Stretch I: 0 ≤ z < 1; Stretch II: 1 ≤ z < 4; Stretch III: 4 ≤ z ≤ 5.
For the simply supported beam subjected to the loading shown, derive equations for the shear force V and the bending moment M for any location in the beam. (Place the origin at point A.) Let a=8.5 ft, b=24.0 ft, P = 30 kips and w = 5.5 kips/ft. Construct the shear-force and bending-moment diagrams on paper and use the results to answer the questions in the subsequent parts of this GO exercise.Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) Determine the shear force acting at each of the following locations:(a) x = 8.5- ft (i.e., just to the left of point B)(b) x = 8.5+ ft (i.e., just to the right of point B)(c) x = 30.5 ftNote that x = 0 at support A. When entering your answers, use the shear-force sign convention detailed in Section 7.2. Determine the bending moment acting at each of…
Use the graphical method to construct the shear-force and bending-moment diagrams for the beam shown. Let a=11 ft, b=6 ft and w = 12 kips/ft.Calculate the reaction forces Ay and Cy acting on the beam. Positive values for the reactions are indicated by the directions of the red arrows shown on the free-body diagram below. (Note: Since Ax = 0, it has been omitted from the free-body diagram.) The shear-force diagram crosses the V = 0 axis between points A and B. Determine the location x where V = 0 kips.Answer: x = Enter your answer in accordance to the question statement ft.