Use transformed-area method. The cross section shown consists of a hollow concrete beam with an effective depth of 400 mm. The beam is reinforced with 4 - 16mm diameter bars placed 50 mm from the bottom of the beam. If the beam has a simple span of 6 m, what total uniform load (including its own weight) could the beam carry besides a concentrated load of 8 kN at midspan. Fc' = 7 MPa, fs = 124 MPa, n=12. 75mm 100mm P 75mm A 150mm 200mm mm 50mm

Use transformed-area method. The cross section shown consists of a hollow concrete beam with an effective depth of 400 mm. The beam is reinforced with 4 - 16mm diameter bars placed 50 mm from the bottom of the beam. If the beam has a simple span of 6 m, what total uniform load (including its own weight) could the beam carry besides a concentrated load of 8 kN at midspan. Fc' = 7 MPa, fs = 124 MPa, n=12. 75mm 100mm P 75mm A 150mm 200mm mm 50mm

Structural Analysis

6th Edition

ISBN:9781337630931

Author:KASSIMALI, Aslam.

Publisher:KASSIMALI, Aslam.

Chapter2: Loads On Structures

Section: Chapter Questions

Problem 1P

See similar textbooks

Similar questions

Answer is 260 mm..don't solve incorrect beam is supported by a roller and a hinge at its extremities. The 2 kN/m is loaded entirely on its 4 m length while 5 kN concentrated load is positioned 2 m from the left end of this beam. If the beam is 80 mm wide, determine the minimum height of the beam if the flexural stress is not to exceed 10 MPa.
A rectangular beam has the following properties: b = 300 mm, d = 350 mm, tension bars As = 4-28mmØ, compression bars As’ = 2-28 mmØ, d’ = 60 mm. Determine the design strength of the beam.a. 233.155 kN.m. c. 636.511 kN.m.b. 332.511 kN.m. d. 755.321 kN.m. Calculate the ultimate axial load capacity of a round spiral column having a diameter of 400 mm reinforced with 6-20 mm Ø bars having fc’ = 24 MPa and fy = 276 MPa. a. 1941.401 kN c. 1841.321 kNb. 9141.401 kN d. 8141.321 kN
The beam is 7m long with EI = 200MNm^2 Let P = 10 kN Find: 1. Slope at 2m from A. 2. Deflection at 2m from A.
A reinforced concrete column 500mm square in section is reinforced with four steel bars of 25mm diameter, one in each corner. The column is to carry load of 1000kN. Calculate the stresses in the concrete and steel bars. E steel=219X109N/m2 and E concrete =14X109N/m2
A 7-meter simple beam is loaded with a varying load that varies from 0 kN/m to 40 kN/m applied at 1 m and 4 meters from the left support respectively. Compute the 6Ab/L of the beam.
A rectangular doubly-reinforced beam 450 mm wide and reinforced by 5-32mm diameter bars for tension and 3-28 mm diameter bars for compression and has the following properties: (NSCP 2010) d = 650 mm d’ = 70 mm f’c = 20.7 MPa fy = 344.80 MPa a. Find the depth of compression block. b. Find the ultimate moment capacity of the beam.
express your answer in whole number. A cantilever beam having a span of 12m carries a concentrated load of 8KN at midspan. Using Area Moment Method, the slope at the midspan in terms of EI is - ( ___ )/EI. chegg
A rectangular beam reinforced for tension has b = 300 mm, d = 480 mm. The beam is reinforced with 7 of 25 mm bars with fc’ = 21 MPa, fy =415 MPa. If the beam is a cantilever beam 3 m long and supports a uniform dead load of 15 kN/m(including its own weight) applied along its entire length, The maximum value of the concentrated live load that can be applied at the free end is _____kN.
QUESTION1) Figure Q1(a) show a simply supported beam of length L = 4.8m is and built for placing Machine and Magnum frame. The combined weight of the machine is approximated by uniform load 90kN/m along x3 = 2.4 m. For of the design, its assumed that the column framed located at a distance x1 and x2 = 0.8m and resulting concentrated load P1 and P2 exerted oneach beam is taken as 150kN and 150kN, respectively. The cross section of beam show as in Figure Q1(b). (a) Determine the bending stress at point a and the maximum bending stress of the beam (b) By referring Figure Q1(a) and consider section n-n, determine the maximum shear stress and the shear stress at point a.
A rectangular beam with a simple span of 6 m, supports a dead load of 17.50 kN/m and a live load of 36.5 kN/m. For architectural reasons the cross section is limited to 300 mm width and a total depth of 540 mm, with an effective depth of 460 mm. The dead load includes the weight of the beam. If f’c = 20.68 MPa, fy = 275.8 MPa.Determine the factored uniform loadDetermine the steel area required for compressionDetermine the steel area required for tension.
PS. triangular load is from 25 kN/m to 0 kN/m
A triangular wooden beam width 150 mm base and 300 mm height carries two concentrated load of 20 kN at third points. If the simple span of the beam is 6 m. Compute the maximum shearing stress of the beam. a. 0.58 MPa b. 1.33 MPa c. 0.48 MPa d. 0.86 MPa