Water enters a pipeline at a speed of 5 m/s and comes out at a speed of 10 m/s as shownbelow. If the pressure at point A is 1.5x10$ N/m2, what is the pressure at point B?(Use: acceleration due to gravity, g 9.8 m/s2 and density of Water, Pwater = 1000kg/m³)PA = 1.5×105N/m2в Vв3D 10 m/sVA=5 m/s5 mSelect one:a. 6.4×104N/m2b. 1.5x105 N/m2Activate Windowc. 3 x104 N/m?Go to Settings to activaA.

Name: Water enters a pipeline at a speed of 5 m/s and comes out at a speed
Uploaded: 2024-03-20T06:51:10.000Z
Channel: Bartleby
Description: Water enters a pipeline at a speed of 5 m/s and comes out at a speed of 10 m/s as shownbelow. If the pressure at point A is 1.5x10$ N/m2, what is the pressure at point B?(Use: acceleration due to gravity, g 9.8 m/s2 and density of Water, Pwater = 10

According to the Bernoulli's theorem,…

Science

Physics

Water enters a pipeline at a speed of 5 m/s and comes out at a speed of 10 m/s as shown below. If the pressure at point A is 1.5x10 N/m2, what is the pressure at point B? (Use: acceleration due to gravity, g = 9.8 m/s? and density of Water, pwater = 1000kg/m3) VB=10 m/s PA = 1.5×10$ N/m2 %3D VA=5 m/s 5 m elect one: a. 6.4x104 N/m? b. 1.5x105 N/m? c. 3 x104 N/m² Activate W Go to Settings

Water enters a pipeline at a speed of 5 m/s and comes out at a speed of 10 m/s as shown below. If the pressure at point A is 1.5x10 N/m2, what is the pressure at point B? (Use: acceleration due to gravity, g = 9.8 m/s? and density of Water, pwater = 1000kg/m3) VB=10 m/s PA = 1.5×10$ N/m2 %3D VA=5 m/s 5 m elect one: a. 6.4x104 N/m? b. 1.5x105 N/m? c. 3 x104 N/m² Activate W Go to Settings

College Physics

1st Edition

ISBN:9781938168000

Author:Paul Peter Urone, Roger Hinrichs

Publisher:Paul Peter Urone, Roger Hinrichs

Chapter12: Fluid Dynamics And Its Biological And Medical Applications

Section: Chapter Questions

Problem 28PE: A sump pump (used to drain water from the basement of houses built below the water table) is...

See similar textbooks

Similar questions

Concrete is pumped from a cement mixer to the place it is being laid, instead of being carried in wheelbarrows. The flow rate is 200.0 L/min through a 50.0-m-long, 8.00-cm-diameter hose, and the pressure at the pump is 8.00106 N/m2. Verify that the flow of concrete is laminar taking concrete's viscosity to be 48.0 (N/m2) s, and given its density is 2300 kg/m3.
(a) Verify that a 19.0% decrease in laminar flow through a tube is caused by a 5.00% decrease in radius, assuming that all other factors remain constant. (b) What increase in flow is obtained from a 5.00% increase in radius, again assuming all other factors remain constant?
Liquid toxic waste with a density of 1752 kg/m3 is flowing through a section of pipe with a radius of 0.312 m at a velocity of 1.64 m/s. a. What is the velocity of the waste after it goes through a constriction and enters a second section of pipe with a radius of 0.222 m? b. If the waste is under a pressure of 850,000 Pa in the first section of pipe, what is the pressure in the second (constricted) section of pipe?
A large storage tank with an open top is filled to a height h0. The tank is punctured at a height h above the bottom of the tank (Fig. P15.39). Find an expression for how far from the tank the exiting stream lands. Figure P15.39
Water emerges straight down from a faucet with a 1.80-cm diameter at a speed of 0.500 m/s. (Because of the construction of the faucet, there is no variation in speed across the stream.) (a) What is flow rate in cm3/s? (b) What is the diameter of the stream 0.200 m below the faucet? Neglect any effects due to surface tension.
Oil having a density of 930 kg/m3 floats on water. A rectangular block of wood 4.00 cm high and with a density of 960 kg/m3 floats partly in the oil and partly in the water. The oil completely covers the block. How far below the interface between the two liquids is the bottom of the block?
Oil having a density of 930 kg/m3 floats on water. A rectangular block of wood 4.00 cm high and with a density of 960 kg/m3 floats partly in the oil and partly in the water. The oil completely covers the block. How far below the interface between the two liquids is the bottom of the block?
(a) What is the fluid speed in a fire hose with a 9.00-cm diameter carrying 80.0 L of water per second? (b) What is the flow rate in cubic meters per second? (c) Would your answers be different if salt water replaced the fresh water in the fire hose?
A table-tennis ball has a diameter of 3.80 cm and average density of 0.084 0 g/cm3. What force is required to hold it completely submerged under water?
A horizontal pipe 10.0 cm in diameter has a smooth reduction to a pipe 5.00 cm in diameter. If the pressure of the water in the larger pipe is 8.00 104 Pa and the pressure in the smaller pipe is 6.00 104 Pa, at what rate does water flow through the pipes?
Gasoline is piped underground from refineries to major users. The flow rate is 3.00102 m3/s (about 500 gal/ min), the viscosity of gasoline is 1.00103 (N/m2) s, and its density is 680 kg/m3. (a) What minimum diameter must the pipe have if the Reynolds number is to be less than 2000? (b) What pressure difference must be maintained along each kilometer of the pipe to maintain this flow rate?
Fluid originally flows through a tube at a rate of 100 cm3/s. To illustrate the sensitivity of flow rate to various factors, calculate be new flow rate for following changes with all other factors remaining the same as in original conditions. (a) Pressure difference increases by a factor of 1.50. (b) A new fluid wit 3.00 times greater viscosity is substituted. (c) The tube is replaced by one having 4.00 times the length. (d) Another tube used with a 0.100 times the original. (e) Yet another tube is substituted with a radius 0.100 times the original and half length, and pressure difference is increased by factor of 1.50.