Water is moving at a velocity of 1.50 m/s through a hose with an internal diameter of 1.60 cm. (a) what is the flow rate in liters per second? |L's (b) The fluid velocity in this hose's nozzle is 14.0 m/s. What is the nozzle's inside diameter (in cm)? cm

Water is moving at a velocity of 1.50 m/s through a hose with an internal diameter of 1.60 cm. (a) what is the flow rate in liters per second? |L's (b) The fluid velocity in this hose's nozzle is 14.0 m/s. What is the nozzle's inside diameter (in cm)? cm

College Physics

1st Edition

ISBN:9781938168000

Author:Paul Peter Urone, Roger Hinrichs

Publisher:Paul Peter Urone, Roger Hinrichs

Chapter12: Fluid Dynamics And Its Biological And Medical Applications

Section: Chapter Questions

Problem 13PE: Water is moving at a velocity of 2.00 m/s through a hose with an internal diameter of 1.60 cm. (a)...

See similar textbooks

Related questions

Q: Water is flowing in a pipe of varying cross-sectional area, and at all points the water completely…

A: Given: The cross-section area of section 1 is 0.0831 m2. The speed of the water flow at section 1 is…

Q: A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole…

A: Following values are given in this question: The hole is having depth = 16 m Now, Using the…

Q: An ideal fluid flows through a pipe made of 2 sections with a diameter of 1 and 4cm, respectively.…

A: Given, Diameter D1=1 cm Diameter D2=4 cm Let speed v1 and v2 at crosssection D1 and D2

Q: The venturi meter is a device used to measure the speed of a fluid in a pipe.the cross sectional…

Q: A large container, 122 cm deep is filled with water. If a small hole is punched in its side 93.0 cm…

A: The given values are,

Q: Water flowing through a pipe suddenly comes to a section of pipe where the pipe diameter decreases…

Q: A large storage tank, open at the top and filled with water, develops a small hole in its side at a…

A: Fluids are the materials that have the special property of being able to flow. The fluids are…

Q: The Venturi tube shown in the figure below may be used as a fluid flowmeter. Suppose the device is…

A: Given Information:- Density of gasoline is ρ=7.00×102 kg/m3 Radius of the inlet pipe is…

Q: A pipe of diameter 0.3 m increases to a diameter of 0.84 m. If the fluid is traveling at 4.6 m/s in…

Q: A man attaches a divider to an outdoor faucet so that water flows through a single pipe of radius…

A: Given: The radius of the large pipe is 9.65 mm. The radius of the small pipe is 5.80 mm. The number…

Q: A horizontal pipe narrows from a radius of 0.250 m to 0.100 m. If the speed of the water in the pipe…

A: The expression for the speed of the smaller pipe is,

Q: A block of density 1120.0 kg/m3 floats in an unknown fluid with one-fourth of its volume below the…

Q: A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole…

A: Depth below the water level, h = 13.4 mFlow rate, Q = 2.9×10-3 m3/minAcceleration due to gravity, g…

Q: An ideal incompressible fluid flows at 12m/s in a horizontal pipe. If pipe widens to twice its…

Q: A large container, 124 cm deep is filled with water. If a small hole is punched in its side 81.0 cm…

Q: Figure shows the effect of tube radius on the height to which capillary action can raise a fluid.…

A: The height of water in the capillary tube is

Q: A horizontal pipe narrows from a radius of 0.300 m to 0.150 m. If the speed of the water is 2.00 m/s…

A: Radius, R = 0.3 m radius, r = 0.15 m Velocity, V = 2m/s

Q: In a tube "U" we have water (density equal to 1,000 kg / m3) and a strange fluid. If the height at…

A: Given data The density of water is given as ρw=1000 kg/m3. The height the water reaches is hw =…

Q: An incompressible fluid flows steadily through a pipe that has a change in diameter. The fluid speed…

A: Radius of one end R1 = 4 cm = 0.04 m Velocity V1 = 1.28 m/s Radius of other end R2 = 2 cm = 0.02 m…

Q: Water is flowing in a pipe of varying cross-sectional area, and at all points the water completely…

Q: What is the greatest average speed (in m/s) of blood flow at 37° C in an artery of radius 1.70 mm if…

A: Radius (r) = 1.70 mm r = 1.70 × 10-3 m Diameter (d) = 2 ×1.70 × 10 -3 m…

Q: A garden hose has an interior diameter of 0.85 cm inner diameter and a nozzle with a 0.35 cm…

Q: Consider a Utube whose arms are open to the atmosphere. Now water is poured into the Utube from one…

Q: What is the volume rate of flow of water from a 1.85-cm-diameter faucet if the speed of the fluid is…

Q: An unknown fluid flows through a pipe at a constant rate of 160 m3/s. How fast will it move in a…

Q: water

A: Given: Depth = 16.2 m Rate of flow =2.6 x 10-3 m3/min. The speed at which water leaves the hole =?…

Q: A large storage tank, open to the atmosphere at the top and filled with water, develops a small hole…

A: (a) Using the Bernoulli’s equation at the top and the hole.

Q: Water is flowing through a pipe that has a constriction opening into a region with a wider…

Q: Water is moving at a velocity of 2.00 m/s through a hose with an internal diameter of 1.60 cm. (a)…

A: velocity, V = 2 m/s internal diameter, D = 1.6 cm Velocity, v = 15 m/s

Q: A vent tube can be used as a fluid flow meter. If the pressure difference P1-P2= 21.0kpa, find the…

A: Given data: The pressure difference is P1-P2=21 kPa. The inlet tube diameter is d1=1 cm. The outlet…

Q: A simple U-shaped tube that has both ends open is partially filled with water. Under these…

Q: A horizontal pipe narrows from a radius of 0.250 m to 0.100 m. If the speed of the water in the…

A: Given: Radius r1=0.250 m Radius r2=0.100 m Speed V1=1.00 m/s

Q: Water is moving at a velocity of 2.50 m/s through a hose with an internal diameter of 1.60 cm. (a)…

Q: When connected to a standpipe, a fire hose 5.29 cm in diameter must deliver a minimum flow rate of…

A: Given Data, Diameter of the fire hose (d)= 5.29 m Flow rate of water (Q)=1.00 ✕ 103 L/min

Q: A fluid with a density of 920 kg/m³ and an absolute viscosity of 1.75x103 kg/m s is passing thru a…

Q: A pipe of cross sectional area 2.34 m2 narrows while splitting into three pipes, each of…

Q: A large storage tank, open at the top and filled with water, develops a small hole in its side at a…

A: We have a hole in a tank at a distance h=17 m from the its surface out of which water is flowing out…

Q: A cylinder, filled with water, contains a small hole through the side of the cylinder, 45 cm below…

A: According to the law of conservation of energy , energy can neither be created nor destroyed but…

Q: Water is moving at a speed of 2.05 m/s through a hose with an internal diameter of 1.85 cm. What is…

A: Speed in the hose, Internal diameter of the hose, Fluid speed in the nozzle,

Q: A pateint recovering from surgery is being given fluid intavenously. The fluid has a density of 1030…

Q: If a kitchen sink has a volume of 20 L. Water flows in the sink with a mass flow rate of 0.5 kg/s.…

Q: The gauge pressure in a balloon in measured by means of an open-tube manometer that uses water…

Q: In a tube "U" we have water (density equal to 1,000 kg / m3) and a strange fluid. If the height at…

A: Given data: density of water ρw=1000 kg/m3 Height of water (h) = 13 cm Height of the unknown fluid…

Q: hat is the flow rate of water that moves at an average speed of 2.8 m/s through a uniform pipe with…

A: Volume flow rate is Q=Av=πd24v

Q: Fluid originally flows through a tube at a rate of 100 cm3/s. To illustrate the sensitivity of flow…

A: Hello. Since your question has multiple sub-parts, we will solve the first three sub-parts for you.…

Q: What is the flow rate of water (in m3/s) hose that can fill 1.75 L bottle in 5 seconds? Group of…

A: Given, Volume of water = 1.75 L = 1.75×10-3 m3 Time = 5s Flow rate = Volume filledTime taken

Q: A nozzle with a radius rn = 0.250 cm is attached to a garden hose with a radius of rh = 0.900 cm.…

A: Given data The radius of the nozzle is rn = 0.250 cm. The radius of the hose is rh = 0.900 cm. The…

Question

Water is moving at a velocity of 1.50 m/s through a hose with an internal diameter of 1.60 cm.
(a) What is the flow rate in liters per second?
|L's
(b) The fluid velocity in this hose's nozzle is 14.0 m/s. What is the nozzle's inside diameter (in cm)?
cm

Expert Solution

This question has been solved!

Explore an expertly crafted, step-by-step solution for a thorough understanding of key concepts.

This is a popular solution!

SEE SOLUTION Check out a sample Q&A here

Step 1

VIEW

Step 2

VIEW

Trending now

This is a popular solution!

Step by step

Solved in 2 steps with 2 images

SEE SOLUTION Check out a sample Q&A here

Knowledge Booster

Learn more about

Need a deep-dive on the concept behind this application? Look no further. Learn more about this topic, physics and related others by exploring similar questions and additional content below.

Similar questions

Water is moving at a velocity of 2.00 m/s through a hose with an internal diameter of 1.60 cm. (a) What is the flow rate in liters per second? (b) The fluid velocity in this hose's nozzle is 15.0 m/s. What is the nozzle's inside diameter?
Fluid originally flows through a tube at a rate of 100 cm3/s. To illustrate the sensitivity of flow rate to various factors, calculate be new flow rate for following changes with all other factors remaining the same as in original conditions. (a) Pressure difference increases by a factor of 1.50. (b) A new fluid wit 3.00 times greater viscosity is substituted. (c) The tube is replaced by one having 4.00 times the length. (d) Another tube used with a 0.100 times the original. (e) Yet another tube is substituted with a radius 0.100 times the original and half length, and pressure difference is increased by factor of 1.50.
Suppose water is raised by capillary action to a height of 5.00 cm in a glass tube. (a) To what height will it be raised in a paraffin tube of the same radius? (b) In a silver tube of the same radius?
(a) Verify that a 19.0% decrease in laminar flow through a tube is caused by a 5.00% decrease in radius, assuming that all other factors remain constant. (b) What increase in flow is obtained from a 5.00% increase in radius, again assuming all other factors remain constant?
A large storage tank with an open top is filled to a height h0. The tank is punctured at a height h above the bottom of the tank (Fig. P15.39). Find an expression for how far from the tank the exiting stream lands. Figure P15.39
Water is moving at a velocity of 2.00 m/s through a hose with internal diameter of 1.60 cm. (a) What is the flow rate in liters per second? (b) The fluid velocity in this hose's nozzle is 15.0 m/s. What is the nozzle's inside diameter?
Calculate the Reynolds numbers for the flow of water through (a) a nozzle with a radius of 0.250 cm and (b) a garden hose with a radius of 0.900 cm, when the nozzle is attached to the hose. The flow rate through hose and nozzle is 0.500 us. Can the flow in either possibly be laminar?
An incompressible, nonviscous fluid is initially at rest in the vertical portion of the pipe shown in Figure P15.61a, where L = 2.00 m. When the valve is opened, the fluid flows into the horizontal section of the pipe. What is the fluids speed when all the fluid is in the horizontal section as shown in Figure P15.61b? Assume the cross-sectional area of the entire pipe is constant. Figure P15.61
Figure P15.52 shows a Venturi meter, which may be used to measure the speed of a fluid. It consists of a Venturi tube through which the fluid moves and a manometer used to measure the pressure difference between regions 1 and 2. The fluid of density tube moves from left to right in the Venturi tube. Its speed in region 1 is v1, and its speed in region 2 is v2. The necks cross-sectional area is A2, and the cross-sectional area of the rest of the tube is A1. The manometer contains a fluid of density mano. a. Do you expect the fluid to be higher on the left side or the right side of the manometer? b. The speed v2 of the fluid in the neck comes from measuring the difference between the heights (yR yL) of the fluid on the two sides of manometer. Derive an expression for v2 in terms of (yR yL), A1, A2, tube, and mano. FIGURE P15.52
What fraction of ice is submerged when it floats in freshwater, given the density of water 0°C is very close to 1000 kg/m3?
The gravitational force exerted on a solid object is 5.00 N. When the object is suspended from a spring scale and submerged in water, the scale reads 3.50 N (Fig. P15.24). Find the density of the object. Figure P15.24 Problems 24 and 25.
Prove that the speed of an incompressible fluid through a constriction, such as in a Venturi tube, increases by a factor equal to the square of the factor by which the diameter decreases. (The converse applies for flow out of a constriction into a larger-diameter region.)