Water vapor enters the steam turbine at 4000 kPa pressure, 500 ° C temperature and 6 m3 / h volume flow, as shown in the figure below. If the mass flow rate of the incoming water is 0.2 times the mass flow rate of the water with 500 kPa pressure and 200 °C temperature from the outlet no.2, it comes out from the outlet no.3 with 30 kPa pressure and 0.85 dryness degree. Since the heat transfer from the turbine to the environment is 5000 kW,

Water vapor enters the steam turbine at 4000 kPa pressure, 500 ° C temperature and 6 m3 / h volume flow, as shown in the figure below. If the mass flow rate of the incoming water is 0.2 times the mass flow rate of the water with 500 kPa pressure and 200 °C temperature from the outlet no.2, it comes out from the outlet no.3 with 30 kPa pressure and 0.85 dryness degree. Since the heat transfer from the turbine to the environment is 5000 kW,

Elements Of Electromagnetics

7th Edition

ISBN:9780190698614

Author:Sadiku, Matthew N. O.

Publisher:Sadiku, Matthew N. O.

ChapterMA: Math Assessment

Section: Chapter Questions

Problem 1.1MA

See similar textbooks

Similar questions

In an adiabatic turbine, this steam flow is 50 kg / s. The power produced by the turbine is 29 MW.Steam enters the turbine with a pressure of 50 bar and a speed of 60 m / s. At the outlet, at a pressure of 0.06 barIt comes out as saturated water with a speed of 130 m / s. Accordingly, the heat lost by the turbine andFind the turbine inlet and outlet temperatures of steam
A nozzle operates with steam entering at 700 kPa and 300 °C. The velocity at the inlet is 30 m/s. As the steam flows through the nozzle, the pressure decreases. Determine the area ratio value (Area / Area inlet), where Area inlet is the cross sectional area of the nozzle at the inlet, at the sections of the nozzle where the pressure values are 650, 550, 450, 350, and 250 kPa. Assume nozzle operates isentropically.
Air is drawn into the compressor at pressure of 100 kPa and temperature of 22ºC. The volumetricflow rate at the compressor inlet is 0.4 m3/s. The compressor exit pressure is 900 kPa and thecompressor efficiency is 70%. The air leaving the compressor passes through a heat exchangerwhere it is cooled by transferring heat to the atmosphere at 22ºC. The outlet temperature of airafter the heat exchanger is 32ºC. The air passes through a valve and enters a 1 m3 rigid tank. Theinitial pressure and temperature of the air in the tank are 100 kPa and temperature of 22ºC,respectively. The final pressure and temperature of the air in the tank are 900 kPa and temperatureof 90ºC. During the filling process, the tank transfers heat to the surroundings (at 22ºC).Don’t assume constant specific heat.Determinea) The mass flow rate of air entering the compressor, ?̇ (kg/s).b) The rate of power consumed by the compressor, (kW).c) The rate of heat transfer from the heat exchanger to the atmosphere, (kW).d)…
The enthalpy of steam entering the turbine inlet is 2750 kJ/kg and leaving turbine at 1750 kJ/kg. The enthalpy of saturated liquid is 190 kJ/ kg and enthalpy of dry saturated steam 2600 kJ/kg corresponding to the condenser pressure. The quality of steam at the exit of turbine is
In thehydroelectric power plant, water enters the turbine nozzles at 700 kPa absolute witha low velocity. If the nozzle outlets are exposed to atmospheric pressure of 100 kPa. Using Bernoulli equation, determine the maximum velocity to which watercan be accelerated by the nozzles before striking the turbinebuckets.
Air flows into a turbine at a rate 30 [m 3 /s], a temperature of 1100 [K] anda pressure of 300 [kPa]. The turbine’s work output is 200 [kJ/kg]. Determine thetemperature of the air at the exit, the power output in [kW] and the isentropicefficiency. The pressure ratio of the turbine is 3. The specific gas constant, R, for airis 0.287 [kJ/kg-K].
Air at a static temperature and pressure of 9°C and 100 kPa respectively enters the intake of an aircraft gas turbine engine with a velocity of 206 m/s. The intake may be regarded as a diffuser with an inlet area of 0.4 m2 and an exit area that reduces the air flow velocity essentially to zero. Calculate the mass flow rate (kg/s) of air through the intake, given the specific gas (air) constant as 287 J/(kg.K)
At a particular stage of a reaction turbine the mean blade speed is 140 m/sec and the steam is at a pressure of 20 bar with temperature of 250° C. Fixed and moving blades at this stage have inlet angles 30° and exit angles 20°. The stage efficiency is 80%. Determine (1) Specific entholpy drop across the stage in kJ/kg.
The work required for compressing gas from an initial condition of 100 kPa and 300K to a finalpressure of 300 kPa is found to be 280 kJ/kg of the gas. The compressed gas is admitted to a nozzle whereits velocity is increased to 700 m/s. If the gas enters the compressor with negligible velocity and leavesthe nozzle at 100 kPa and 300K, what is the heat removed during compression?
An adiabatic feed pump in a steam cycle delivers water to the steam generator at a temperature of 200 °C and a pressure of 10 MPaa. The water enters the pump as saturated liquid at 180 °C. If the mass flow rate of water is 20 kg/s, determine a) the discharge volume flow rate of the pump; and b) the pump power input. c) What is the percentage error if the exit conditions are assumed to be a saturated liquid at 200°C.
To preheat the water before entering the boiler, a feed water heater is used, as shown in the figure. A mass flow of 30 kg/s circulates through the system, and 7 kg/s are “bled” into the turbine and go to the feedwater heater. Depreciating the losses in the different pipes and components, determine: a) Water temperature at the outlet of the feed water heater b) The heat transferred per unit time in the boiler c) The power developed in the turbine d) The total power required from the pump e) The energy transferred in the capacitor f) Feedwater mass flow
A reaction turbine has mean blade speed of 220 m/s and blade speed to steam velocity ratio of 0.7. Determine the angle at inlet of blade and work done per kg of steam flow if angle at exit is 20°.