What are the steps for drawing?

Q: operation of open-die forging

A: To find :-  Die forging

Q: 8) Which one of the operation is not a part different stages of drop forging process?

A: Explanation  Nibbling is the method of punching overlapping hole in the sheet metal operation. While…

Q: What is the operation of parting?

A: Parting operation

Q: Identify the forming process in which the rectangular shape of the cross section is reduced into…

A:

Q: If it is desired to reduce the power required for the rolling operation of part (b), what…

A: Given : Roller operation for a workpiece To find : To reduce the power required

Q: Briefly explain the drop forging process with a neat diagram.

A: What is Forging? Forging is a process of metal working in which useful shape is obtained in solid…

Q: In which of the following forming operations, the workpiece is pulled through a die resulting in…

A: Answer is (a) Wire Drawing

Q: Identify the type of forming process in which the material is required to pass repeatedly through…

A: Option c is correct.

Q: How long does the Forging process take?

A: It takes about 3- 5 days of constant hammering. If we want some good and super fancy look it will…

Q: Explainthe advantage of corner radii of punch and die in Sheet Metal Drawing Process.

A: The corner radii of punch and die is very important in sheet metal drawing process because the radii…

Q: Y san we possibly measure the drawability of sheet metal ?

A:

Q: What is the main difference between extrusion process and drawing process?

A:

Q: a). Briefly explain the drop forging process with a neat diagram. b). Explain the wire drawing…

A: The above both process are used for manufacturing process.

Q: How to study rolling process and its parameters?

A: In metalworking, rolling is a metal forming process in which metal stock is passed through one or…

Q: he end of forging-stroke during impression-die forging is forming of O a. die cavities O b. die…

A: Answer - option (b) - die flash The end of forging-stroke during impression-die forging is forming…

Q: What is the permanent strain?

A: Strain: When a force is applied to any system, they deform based on the applied force. The…

Q: (c) Sketch and describe in sequence THREE (3) sheet metal forming processes involves in producing…

A: Sheet metal processes are used for creating various shapes of metals. The various processes are…

Q: Explanation of the Forging process with drawing.

A: Forging :-

Q: * Which defect arises due to small Punch force in sheet drawing operations? O Tearing O Wall…

A:

Q: Suggest the optimum parameter setting or methods to obtain high quality moulded parts.

A:

Q: 3) Which of the below statements is/are correct regarding deep drawing process? i. If the clearance…

A: In deep drawing process,the clearance is set to be 10% more than the sheet thickness. When the…

Q: 7) Sketch a 15 extrusion die; label the die angle. Will it have higher or lower redundant work than…

A: Draw the extrusion die as follows and label the die angle as shown.

Q: II. In a wire drawing operation, why must the drawing stress never exceed the yield strength of the…

A: The drawing operation is the process of covert the rod into the wire with the help of a drawing die.…

Q: Both extrusion and bar drawing processes can be used to reduce the cross section. What can be the…

A: EXTRUSION BAR DRAWING A compressive load is applied at the entry end. A tensile load is applied at…

Q: What is isothermal forming?

A: Isothermal Forming :-

Q: xplain the basic operation of closed-die forging. Use sketches to assist the explanation.

A: Given Data : Closed die forging

Q: Friction between .................. and .... ........... in direct extrusion more force requires. m)…

A: Given :-  L) Friction between .................. and .... ........... in direct extrusion more…

Q: ; It is proposed to use an axisymmetric drawing operation to reduce the diameter of a cylindrical…

A:

Q: In a two-stage wire drawing operation, the fractional reduction (ratio of change in cross- sectional…

A:

Q: Describe, using sketches, the possible metal forming process that could have been used to produce…

A: Given:

Q: Q#4:(a) Explainthe advantage of corner radii of punch and die in Sheet Metal Drawing Process.

A: Corner radii are important in sheet metal drawing process because the radii of punch and die avoid…

Q: It is proposed to use an axisymmetric drawing operation to reduce the diameter of a cylindrical rod…

A: Calculated the minimum number of drawing stages needed to reduce diameter of cylinder from Do to…

Q: An aluminium sheet blank is to be manufactured into the part shown in Figure 3. Discuss using…

A: Given Aluminium sheet blank To find Operations

Q: 4) In cold forming, surfaces of the starting work piece should be free of dirt and scale. Why?

A: As per honour code , we will answer the first question . For next part submit a new question   Cold…

Q: List factors affecting metal forming performance

A: The factors affecting metal forming performance are: 1. Temperature All metals re hard and strong.…

Q: In the drawing operation, mechanical property ductility is an important parameter. Select one: True…

A: Ductility is a mechanical property that describes how easily a substance can be drawn into a wire.…

Q: How long does the extrusion process take?

A: The time required for the Extrusion process depends on

Q: 1. What types of drawing process? 2. What are the Defects in cold drawn products? 3. What advantages…

A: As per guideline  we can only do one question at time. But we can do the first three question

Q: 1- The use of lubricant in wire drawing die.

A: we have to discuss the use of lubricant in wire drawing

Q: 2. A paper below has a shear strength of 10 MPa. What must be the applied force to cut the paper…

A:

Q: A deep drawing operation for a cup is performed in which the inside diameter = 60 mm %3D and the…

A:

Q: 1) A cup-drawing operation is performed in which: The cup's inside diameter = 75 mm and its height =…

A: Given Datad=75mmh=50mmt=3mmRd=4mmσt=400MPa

Q: 3) Collapsible tubes are made by Drawing Spinning Rolling Impact extrusion

A:

Q: 7) In deep drawing of sheets, the values of limiting drawing ratio depends on percentage elongation…

A: As per given question deep drawing of sheets,  limiting drawing ratio depends on