An industrial plant is supplied by a power utility company with voltage of 7.97 kV. To monitor the plant's performance and consumption, the utility company installed a potential transformer (PT) and a current transformer (CT) at the plant's premises. The specs of the transformers are as shown on Figure 1. The plant is drawing 2000 kW at 0.90 pf lagging,. Industrial Plant IA CB A VL = 7.97 kV PT CT (V) 1 kn 250 ΜΩ PT Specs: 7970-V:120-V, 60 Hz X₁ = 1721 02, R₂ = 1378 , X = 782 k X₂ = 1897 22, R₂ = 1602 (referred to its primary) CT Specs: 200-A:5-A, 60 Hz X, = 745 μΩ, R, = 136 μΩ, Χ = 307 ΜΩ X'₂ = 813 μn, R'₂=128 un (referred to its primary) ...

An industrial plant is supplied by a power utility company with voltage of 7.97 kV. To monitor the plant's performance and consumption, the utility company installed a potential transformer (PT) and a current transformer (CT) at the plant's premises. The specs of the transformers are as shown on Figure 1. The plant is drawing 2000 kW at 0.90 pf lagging,. Industrial Plant IA CB A VL = 7.97 kV PT CT (V) 1 kn 250 ΜΩ PT Specs: 7970-V:120-V, 60 Hz X₁ = 1721 02, R₂ = 1378 , X = 782 k X₂ = 1897 22, R₂ = 1602 (referred to its primary) CT Specs: 200-A:5-A, 60 Hz X, = 745 μΩ, R, = 136 μΩ, Χ = 307 ΜΩ X'₂ = 813 μn, R'₂=128 un (referred to its primary) ...

Power System Analysis and Design (MindTap Course List)

6th Edition

ISBN:9781305632134

Author:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Publisher:J. Duncan Glover, Thomas Overbye, Mulukutla S. Sarma

Chapter2: Fundamentals

Section: Chapter Questions

Problem 2.22P: The real power delivered by a source to two impedances, Z1=4+j5 and Z2=10 connected in parallel, is...

See similar textbooks

Similar questions

DC circuit has no harmonic components in power system؟ True False
You are given five light bulbs designed to operate on 160 mA current at 3.0 V (rms values), arid want to connect them in parallel, through an ideal transformer, to 120 V rms AC household power. a) Draw a circuit diagram showing the AC power source (a generator symbol ), the transformer, and resistors for the light bulbs. b) Is the required transformer step-up or step-down? What turns ratio N5/N is needed? e) Calculate the ruts current through both the primary and secondary coils of the trans former, in mA.
Discuss the role of FACTS (Flexible Alternating Current Transmission Systems) devices in power system control and optimization.
Neon signs (which often contain gases other than neon) use high voltage to excite gaseous atoms that then give off a characteristic glow. When plugged into a wall outlet (120 V AC), a typical neon sign transformer delivers 400 W AC at a voltage of 18 kV rms. The primary coil has 400 turns. 1. First, what is the number of turns in the secondary to achieve this high voltage? Give your answer to 2 significant digits. 2. Next, if the transformer is ideal, what is the rms current in the primary? Give you answer in amps with 2 significant digits. 3. Finally, what is the rms current in the secondary? Give your answer in milli-amps with 2 significant digits.
If the values of real power and reactive power is specified for a bus, then it is called as PQ bus. Select one: True False
Discuss the challenges and solutions in integrating renewable energy sources into an existing power system grid.
A system is working at its maximum kVA capacity with a lagging power factor 0·7. An anticipated increase of load can be met by one of the following two methods: By raising the p.f. of the system to 0·866 by installing phase advancing equipment. By installing extra generating plant. If the total cost of generating plant is Rs 100 per kVA, estimate the limiting cost per kVA of phase advancing equipment to make its use more economical than the additional generating plant. Interest and depreciation charges may be assumed 10% in each case.
What is the problem in smart grid: creating a more resilient and flexible power grid that can integrate distributed energy sources and respond to changing demand.
An ideal transformer is rated to deliver 460 kVA at380 V to a customer, as shown in Figure.a. How much current can the transformer supply tothe customer?b. If the customer’s load is purely resistive (i.e., ifpf = 1), what is the maximum power that thecustomer can receive?c. If the customer’s power factor is 0.8 (lagging),what is the maximum usable power the customercan receive?d. What is the maximum power if the pf is 0.7(lagging)?e. If the customer requires 300 kW to operate, what isthe minimum power factor with the given sizetransformer?
3 A biomass plant with a power rating 137 MW has a power cost of $63 per MWh, while a plant with a power rating of 450 MW has a power cost of $50.30 per MWh. Determine the power sizing exponent, x.
What is the main direct cause of reactive power in AC system?A. Resistance of transmission linesB. Inductance and capacitance in the loadsC. Ideal transformer connected in the systemD. Power produced by generator
Explore the use of FACTS (Flexible Alternating Current Transmission Systems) devices in advanced power system control and stability enhancement.